Reviews
The unique shape gives it personality.
I ordered this product because of a small cut that I knocked over my motorcycle in place. It properly covers the wound area and creates a unique look. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Design is good, but texture is not so good
Air IntakeDuct and Quantity:This is a product that is intended for Set use.
Inevitably, this will be used.
The thickness is very thin, the same as the Punching board at Home center.
The Manufacturer logo is also a bit cluttered when viewed from behind, and I think the cost performance is a bit poor.
Also, the double-sided tape is used for the mounting method, but I wish they had devised a better method for that as well.
Air IntakeDuct is responsible for the performance.
View detail
Darker color than Black:Gray
It is described as Black, but it is obviously a darker Color.:Gray View detail
Sound has changed. Horsepower is...
There seem to be a lot of people in the 25R area who have it on, and I bought it to experience the difference in sound.
Horsepower isn't a concern for me right now.
Tuning is done by Computer at the stage of completion of this kind of custom set.
We will leave it until then.
The sound certainly changed and became a little more powerful. I am fairly satisfied.
However, the sound change is more than the increased intake Image.
The resonant sound of Duct's Body seems to have become Large.
It can only be enjoyed at low speeds.
As for horsepower, I pulled it down to Peak power.
Both Normal muffler and AKRAPOVICRacing line
We have not felt any change.
With the AXIS Lapo, it seems to blow up just a little smoother.
I am not too sure. On the contrary, there is no Minus factor at all.
Regarding installation, the Instruction Manual seems a bit clunky.
It is difficult to have a problem because the object is simple, but in the case of more complex objects, it is difficult to have a problem.
Is Large sturdy with such a flippant explanation? I felt that it was.
For example, if the Tape is to be placed in a position where Leave a gap here." It is stated that
It doesn't say anything about how much space you're going to leave available, nor does it say anything about numbers or objectives.
The image is hard to see because the gaps are painted over with a thick red pen, and the
It is said to be an OEM well nut diversion, but in reality it may not be possible.
(You can remove it, but you have to push it in to reattach it next time.
(The strength and elasticity of the material is unknown, so forcible insertion may result in damage.)
View detail
SE + 22nm
I installed it on a 19 MODEL H2SXSE+.
The actual measurement was 22mmDown.
Originally, SE+ seems to be about 10mm higher than SE, so it may not be the 30mm Down that Trickster says.
Even with approximately 20mm down, the effect was positive, and some of the footing anxiety was eliminated.
However, side stand parking is a little bit standing up, so care may be needed when parking on an incline.
View detail
trick star exhaust mount
The original Phantasy Star exhaust fixing bracket was broken, and the domestic price is a bit high. I found this bracket for sale on WEBIKE. The price is very suitable. I decided to start it. The shopping experience is very good! Logistics is also very fast! -------------------------------------------------- -------- The original Dream Star exhaust fixed bracket broke, and the domestic price was slightly higher. It was found on Webike that there was this stent for sale. The price was very suitable. It was decisive. This shopping The experience was very good! Logistics is also very fast! Powered by Google Translator View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400
First Exhaust System Purchase
This was my first Exhaust System purchase. It was very expensive and I was anxious because it was my first purchase. I was satisfied with the purchase because the contents were well packed and the delivery date was kept within the time frame. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Trickster for Kawasaki cars
Low cost compared to other companies.
I bought these parts because they protected my front fork when I crashed in the Circuit on another vehicle.
I don't want to try it again (laughs).
View detail
It is easy to install.Stand Hook。
It is easy to install. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400
Appearance highest
I am a beginner who has been licensed for 6 months.
Installed on NINJA2 Helmet50R 2022 MODEL.
Before that I was using BEAMS R-EVOSlip-on Silencer, so this is a comparison with that Exhaust System, but first of all, it looks Parenthesis good! The price is expensive, but I am satisfied.
I think the accelerator operation in 1st and 2nd gear became smoother.
I'm Large-satisfied with both the look and the ride!
View detail
I am satisfied
Buy Black Plating.
There was no indication of fitment on the '20 mt09, but I was able to install it normally.
Simple is good.
I would have been happy if the price was a little lower.
But I am satisfied with the results.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI ZRX1200DAEG, KAWASAKI Ninja250, KAWASAKI Ninja250R, KAWASAKI Ninja400, KAWASAKI Z650RS, KAWASAKI , KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Trickster Lever GuardQuantity:Set Kawasakifor Vehicle Green Light
I hope you don't use it for when you fall on the mountain pass.
It's a beautiful thing to look at.
Unity with Trickster
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
TricksterFront Axle Slider
Slider, the last resort, all put together by Trickster.
A sense of unity - wonderful!
View detail
TricksterFrame Slider
I love the 3-piece set.
Trickster
Frame Slider、Front Axle Slider、
TricksterLever GuardQuantity:Set Kawasakifor VehicleGreen Light
I am satisfied with Large change
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
Due to damage to the OEM brake pedal
It was my first time to install Packfootpeg, but I installed it referring to YouTube etc.
The position was set to the rear, but the brake hose had to be pulled back a bit.
There is no problem in operation.
I think you will also need grease and screw locker separately.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Frame Slider
It is easy to install. Repair parts are also available.
Be careful not to order Repair Parts.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Simple and Cool!
I think this is a good Design for Simple.
It's not a very conspicuous place, but I think people who know it will recognize it.
View detail
I don't think you'll notice the effect on city driving...
I don't know if I increased the horsepower or not. The intake sound is a little larger than before. It took some time to remove the cowl, but it was no problem. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400
I'm satisfied!
The bass was great, the look was cool, it was great! View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI VERSYS1000
Easy
I think it's an easy to install part that will give you a custom look. View detail