Reviews
Fits: KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R
Note the heel plate.
The surface is not anodized but rather smooth and painted, giving it a unique texture.
The Peg slipperiness is not as robust and biting, but it is not lacking.
The Bolt's seat surface is gouged so that the surface is even and comfortable to the touch, but the heel plate is small.
Those who use a lot of toe input may have difficulty with Hold.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
I chose it for the first time because of the short delivery time.
I used to use Rear Sets from another company, but the delivery time was slow, so I purchased Trickster's product for the first time. The price was a little lower than other companies, but I was satisfied with the level of functionality and accuracy.
I installed it myself, but since the Instruction Manual only contains a Parts List, I recommend that those who are not confident about this should ask the shop to do it for them.
View detail
Fits: KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R
Note the size of the heel plate.
I have used Babyface and YOSHIMURA's Rear Sets, but I could feel the difference in design concept.
The exterior has a semi-luster finish with a thicker coating film and a smooth surface, giving it a luxurious feel, and unlike Anodized, it has a less gold-like appearance.
The cutting of footpeg is not deficient because of the roughness of the eye, but the Grip feeling is modest compared to the former.
The stiffness is quite high, the former had some bending, but this one is firm. I think this level of stiffness is good for a large type SS.
The structure of the seat is such that the plates of each part are flush with each other, so it feels good on the feet. The bolt is also flat because the seat surface is gouged out and driven inward, so the contact surface is flat.
The Pedal is outside of the Plate, so if you have your foot firmly on the Pedal, you will be stepping on the entire Pedal.
While the former structure was designed to change the distance between the front and back at the tip of the pedal, this one is arranged to adjust the height, which can be adjusted without tinkering with the Linkage or Master Cylinder, but the range of adjustment to the LargeSmall foot is small.
Rear brake return spring is included, with a larger diameter wire than the OEM for a firmer feel.
The heel plate is too small. When you put your foot on the footpeg, the back edge is about heel level, but when you input your toe, the heel does not stick.
The instruction manual is rich in illustrations and easy to understand about installation. The packaging is good because it is in assembled condition, so it is easy to understand the Bolt installation position.
Torque should be mentioned in the service manual instructions, if you know about it anyway.
After completion, the instructions for tightening the screws were given, but since the screw lock was painted and tightened in some parts and some parts were temporarily assembled, we had to untighten the temporary assembly and retighten it, which took a lot of time and effort.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
It is well made.
We used the same footpeg before, so we decided to go with Trickster again.
A color Instruction Manual is also included, and the footpeg is temporarily assembled for easy installation.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
Quality is good
The Large tight position of the change makes the plumbing of the Brake overpowering, but it is Minus. Other than that, no complaints. View detail
TricksterRear Sets
I am satisfied with Simple and Parenthesis. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
Due to damage to the OEM brake pedal
It was my first time to install Packfootpeg, but I installed it referring to YouTube etc.
The position was set to the rear, but the brake hose had to be pulled back a bit.
There is no problem in operation.
I think you will also need grease and screw locker separately.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
Lend me your ears a while
Repair Parts are not detailed, so they are expensive when it comes to repairs. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z1000
Cool
The cut-out is very well made and can be adjusted, but it is difficult for an amateur to install, especially to adjust the brake side. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R
Recommendation for people who feel footpeg is too low
I decided to use this product with BEET's RACINGLink PlateKit because toe rubbing occurs frequently when turning. 16mm RACINGLINK + this product raises the footpeg position by about 30mm from NORMAL.
At least 5mm and 6mm Hexagonal Wrenches and 10mm Spanner are required for installation.:2pc required
HandlingInstruction Manual is helpful for Motorcycle Parts, but it is not 100 points for amateur.
OEMBolt is sticky with screw lock agent, so it takes a lot of power to remove it by yourself. I had to insert Hexagonal Wrench deeply and put my weight on it many times to turn it little by little.
I was worried about the position of the pipe on the brake side. 16mm up on the upper side is the limit, but it is also safe in terms of gravity. I think it is better to remove the Heel Guard first and put it back at the end.
On the Shift side, removing the footpegBody from the ROD can be done without tools, but removing the OEMParts to replace the ROD'sRear requires a 10mm SpannerQuantity:2pc is required.
You do not need to remove the Heel Guard.
For me, the relationship between the height and shape of the OEM Seat and the footpeg position was almost ideal. So, the ideal was broken and it became a little cramped posture-wise. In my case, I feel that moving 23mm backward and 16mm upward was quite different from the content of the review of the back plate including the one of another company by other Owners, and there was a considerable change.
In fact, my toes are less likely to chafe.
By the way, in my case, the introduction of the back plate is the third machine following YZF-R15 and YZF-R25, but I felt that all of them had changes in their own way.
In addition, even in the OEM position, the Tandem step holder and footpeg frequently hit the heel of the shoes or the Achilles tendon area, but as expected, it became more difficult. The basic way of riding is to step on the corner of the footpeg, so even if it interferes, it is within the range where Limit can be covered up, but if it goes back even a little further, for example, even if it is only 5mm, I think it will become so severe that it will not be able to ride properly.
If you want to make it any more Rear Sets, you'll need to remove the Tandem step holder itself.
I raised the ride height with RACINGLINK, but I don't feel like I raised the ride height too much, probably because the footpeg went 23mm back, which improved the footing.
I could feel that the purpose was to increase the bank angle, and the footpeg position was obviously raised, and the distance from the ground was raised considerably.
I don't know if it's this product Single Item because I haven't experienced it yet, but if it's used with RACINGLINK, it's easier to turn so that TCS can intervene.
Also, I don't feel that the position of Brake has changed, but the Shift position seems to have risen slightly, and I felt a little uncomfortable (I'm sure I'll get used to it in time, but was it poorly installed? (I'm sure I'll get used to it, but was it poorly installed?
The price is high, but it is elaborate and the mark of the manufacturer is cool, so I think it is the cost for that.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R
Ideal for those who don't want a Spartan for footpeg & position …
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
The item was exactly as Image …
Was the installation difficult?
It is easy to install because all you have to do is remove the normal step and put it back in.
How was your experience with it?
A little lower and a little higher than the OEM footpeg so it's perfect for touring and city riding …
[Included Parts:were they on?
The instruction manual was very clear and easy to understand with specific points and included parts;
[Was there anything that disappointed you?
Unlike Rear Sets, Back & Up is only a little bit of a honk, so if you know what you're buying, you're buying ○… if you're looking for excessive Back & Up, you should buy Rear Sets with an open mind.
good point
It's a good idea to have TRICKSTARMARK printed on the front, which looks NORMAL at first glance, but is actually … the gold amount is a bit high, but it's just the cost of printing … I think it's the cost of printing …
The bolts I used were also harder than other manufacturers
View detail
Large satisfied ??
zx10rr-installed on a 2019 MODEL!
good point
Shift operation is transmitted to the foot directly.
You can trust the Grip power of Footpeg and hanging on.
? You won't feel like you're putting your weight on the stiff, solid Footpeg.
There are many position settings to choose from, so you can make your own settings.
What's on my mind
Plate is a little small for a heel grip.
I don't think those of you who bend your banked side leg outward when Hanging on will be bothered by this.
Heels.
View detail
I think it's a matter of taste
Rear Sets makes the SS position more difficult
However, it is very useful for shifting the center of gravity
Compared to the OEM footpeg, it is now possible to move the center of gravity to Right and Left with ease ..
Installation is about electronic devices like Quick shifter and ABS
I asked to install it because I was worried about installing it myself
View detail
Simple and Parenthesis good
The look is WoodStock and the range of adjustments is Babyface, with a choice of reverse and positive Change I was struggling with AGRAS when Trickster's Rear Sets were released I bought Trickster's Rear Sets, Instruction Manual The book is very easy to understand with detailed explanations with pictures and the order of assembly The only thing is that the part numbers are not listed on the packaging of the parts, so if you have a bolt or something similar in shape, you can't use it There's only one other part that doesn't have instructions on how to install it, and that's the TankStay I installed it as shown in photo 3 by a process of elimination and contacted the manufacturer The same pictures were sent to me within a day, I was surprised at how quickly they responded lol View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
Is pleased
This time, I'm going to use the Ninja 250 ('18) I wanted to install the Rear Sets on the Rear Sets, and I wanted to see how they looked, the price, and the Trickster I liked the Manufacturer's reliability and a certain amount of adjustment range
I did the installation itself, but as far as the accuracy of the parts is concerned, it was perfect and came with pictures and drawings The Instruction Manual was included in the package, so I was able to install it successfully!
OEMfootpeg removal is abbreviated, so please refer to the YouTube video You may remove it while doing so
Tools used include 10 Wrenches, Allen Wrench with 1.5 to 10 in it Set, Screw locketc
This time, I installed the Position at the rear of the rear brake side when installing the footpegs, I had to pull the ABS piping quite a bit to get the footpegs to work I had to install it and it was very difficult to do so
Also, if you forget to install the Heel Guard at the same time when installing the Brake master, you will not be able to use the Be careful, because you'll be crying later on
Later, it doesn't matter, but the second copy of the Instruction Manual that was included in the package Yellow Back dimension of the Reverse Shift compatible Position is 36mm I think it's probably a mistake of 26mm
In terms of actual installation and running, it's easier to load than the OEM footpeg It is now in a position where I feel comfortable with the position I'm happy with the position
I haven't run long distances yet, so I don't know about the feel of long distance use …
In the meantime, I thought it looked and felt fine, and I thought it was a good buy, so 5 stars I have made it a
Finally, I was doing a test run, and I looked at the Pedal and saw that both Pedals' I forgot to tighten the Screw and the Pedal was about to come off If you install it by yourself, please be careful not to forget to tighten the pedal part
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
Long touring is safe now!
I installed it on my NINJA400
I've been trying to keep my legs straight when I stop, so that when I put my legs straight down, my legs hit the footpeg and I can put them out a little bit in front of me I did
RightWhen I put my foot down, I put it down in front of the footpeg or behind the footpeg
In addition, when touring long distances and driving on highways in normal steps, you can also use a normal step
the footpegs are forward and difficult to load
This is the same for Winding on mountain passes and other roads
If the footpegs are in front of the rear tire when you want to put a load on the rear tire, the footpegs are not as strong as they should be I had a feeling
Especially at high speed while Cruising, you must ride with the footpegs loaded on the footpegs It didn't feel right without
The main reason why I purchased Rear Sets is for the above reasons
But the Gold amount is also reasonably high, and I wasn't ready to take the plunge
I took the plunge and bought it
I'm going to install it at my regular motorcycle shop for inspection I asked for it
Talk about the frustrations of the normal step and leave the height at the very back position for now at NORMAL In
I had it installed
After installation, the vehicle was run through a break-in period
the position of the footpeg has eliminated any frustration I had with it
the footpegs have been moved to a position where it is easier to load the footpegs, so we can use
I feel less tired than ever before
The position of the hips (center of gravity of the body weight) and footpeg position (close to the center of gravity of the body weight) is the balance It's better
Also, when stopping, you will be able to lower your legs straight, and you will be able to put your footpegs in between the brake pedal and the footpeg It can be lowered just right and straight
i think the footpegs are now behind me, which makes it easier to load the rear tire
In the normal position, the bend angle of the knee is not too tight
It's a bit of an expensive investment, but I think the benefits are worth it
I had assumed that Rear Sets were to be used in the Closed Course
It was never like that My perception has completely changed
You'll see the effect, especially if you're touring over 300km
I can recommend it in terms of dress-up and practicality
However, the Brake pedal is slightly different from the Shift Pedal
You may feel uncomfortable at first when you step into the same shape
You'll get used to it as soon as you do some careful break-in driving on roads you're used to driving on
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
I think it's good for For Street
I use it on my R25 and the position is at the top of the back
good point
The range of positions that can be selected is fair enough, and the Shift feeling is a good thing The look and quality of the Parts themselves
A bad point
the footpeg is hollow, and a round part is put in the tip of the footpeg It can be easy or hard to get into It's not easy or hard to get into, but when I noticed it, it came off That's why I don't recommend it for Circuit
Assembly is quite troublesome
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3
Trickster
In use in YZF-R3.
I set it to Back & Up and use it with Reverse Change.
I think that it is possible to make sure Gear changing with Touch lighter than OEM.
Since the Snap and hook feeling at the moment of Change are transmitted clearly, operation is very pleasant.
Personally, it is a 100 full-brand product, but one point that tastes can be divided by individual difference.
Since this product is not Foldablefootpeg, I will receive Molo the impact of falling.
It is not easy to break, but if you have a risk of falling at high speed with Circuit etc. I think that attention is necessary.
View detail