Reviews
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Expensive but satisfactory
I feel safer with it on and am happy with the way it looks. View detail
With a little work, it could be installed even with Cowl installed.
Radiator core guard on ZX-6R with no Option setting in OEM
Since it was a new car, we wanted to install it while it was new, so we selected Trickster's product, which was one of the first to offer compatibility with the 24-year model.
I was wondering if it was that large since it arrived from Webike in 120Size. I wondered if it was that big, but it was mostly packing material (laugh).
We believe that the curved RadiatorCore is designed to fit the curved RadiatorCore so that it does not deform due to its easy bending.
Thank you very much.?
The Instruction Manual says to remove the cowl, but I read in a past review that it can be installed without removing the cowl, so I decided to take the challenge.
When I applied it with the packing material still attached, it looked like I could manage without removing the cowl, but the Horn was in the way of hooking the upper three claws to the top of the RadiatorCore, so I removed it, removed the packing material, and installed it without problems.
However, it may be tough to remove and install the Horn and the lower OEM mounting bolt without a tool that can be applied force even in a tight space.
Also, please note that there is still a possibility of scratching the Cowl and Front Fender.
Too bad it doesn't stand out much on Full Cowl cars when installed.
View detail
Easy installation and dress-up effect
Installation should be very easy.
The Instruction Manual was so simple that it was misinterpreted and installed incorrectly, so we had to start over.
It is not usually a place to look closely, but there was a spot where the Core had been crushed after about 1,000 km of driving.
I regret not putting it on sooner.
The screws on the underside of the guard are difficult to reach, so it is better to close the guard with the Glasses than with the Ratchet.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
I was told by an acquaintance that I should install a radiator guard.
[How is it used?
Purchased with 500km on the odometer.
Was the one you received as per Image?
Simple and good.
How was your experience with it?
I think this is good because the fins are not directly hit by splashing stones, insects, etc.
[Points to note]
If you don't want to put a Cowl, etc. with a Wound, etc., you might want to ask someone who knows what they are doing.
How did it compare to other products?
I have not seen other products, so I don't know about rigidity, etc., but I bought it this time because I saw it in Simple and the mesh was fine.
Point and hang of installation
I installed it myself without removing the cowl, etc. I think it took about 10 minutes if I followed the instruction manual.
As others have mentioned, if you do not want to put Wound on Body, etc., we recommend that you ask a knowledgeable person to do so.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI VERSYS1000
Trickster Radiator core guard
I was not sure whether to choose Silver or Black until the very end. In the end, I decided to go with Silver, but the part that used to be pure Black is now Silver. A Sense of Change." Silver will be Accent, and Black will look natural, so you can't go wrong with either (your choice). View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900
inconspicuous
Black Plating for a nice, unobtrusive look. View detail
Change from OEM
This is a change from OEMCore guard.
It looks nice, but the grain is finer than OEM, so we will have to wait and see how the cooling effect will be.
It would be even better if the price were lower.
View detail
Not too conspicuous.
Buy Black Plating.
The body of the car is Color:Gray, so the subdued Black Plating is a nice touch.
I am satisfied with Large because it is easy to install and ExactlyFit and does not wobble.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Good looking and easy to install.
Cowl does not need to be removed to work!
*Extreme care must be taken not to bump it. At your own risk!
Looks great! No distortion etc.!
It is difficult to evaluate because it is a "can't fall down" kind of Parts.
I guess my only concern is the high … price.
It would have been … nice … if it was at least in the low 10,000s ….
I'm not sure if it's OEM or not, or if it's an unspoken price collusion thing, since the prices of Large Brand's products are all the same.
View detail
I guess it's better than not putting it on.
I had not intended to put it on because I thought it would increase air resistance, but I put it on because it often gets dirty.
It went on easily without processing. I don't know how durable it is. If you have some skill, you can easily install it, but if you don't, you will have to remove all the surrounding parts. The only thing is that it is a bit pricey. ・・・・
View detail
Fits: KAWASAKI Ninja ZX-25R
Performance is very good, but DIY is not recommended.
Exhaust System is a different Manufacturer, but you can purchase Funnel, PowerIntake, and MWR Filters to get the Quantity:I have the impression that the claims made by trickrtar, including the performance of the Shifter, are true.
However, installation is not recommended for DIY due to the following problems
Problems
OEM Shifter Can Sera- faulty? CheckLamp is lit.
I consulted with the manufacturer, but received only a Template answer. Even after informing them of the error and verification details, we have not heard from them. ....
I went to Jam's site, an authorized RapidMotorcycle distributor, and repurchased the Can Sera. After installing it, I turned off CheckLamp and confirmed that it was fixed. The shape of the can seraer was also changed, so it may have been improved in some way.
From the above, it is certain that there is a problem with the can sera, but DIY is not a good way to deal with it. It is inevitable, but it is a little disappointing.
View detail
Fits: KAWASAKI Ninja1000SX, KAWASAKI Z900RS, KAWASAKI Z900
Good
Eva's One point is cool!
Easy to install
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS
I think it's a good product!
I haven't rolled it yet, so I don't know how well it works, but it was easy to install and looks great! And I feel more secure now! View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
It's looking good!
I installed this on a 2022 ninja 400. It is very solidly made, and there is a clearance between the radiator and the steering wheel, so there is no chattering sound while running. The attached screws are also made of stainless steel. (Aluminum？) The white glue is not easy to rust. One point of concern is that the White-like adhesive for attaching the Trickster Logo is sticking out, so be careful if you are concerned about the appearance. View detail
The unique shape gives it personality.
I ordered this product because of a small cut that I knocked over my motorcycle in place. It properly covers the wound area and creates a unique look. View detail
I am satisfied
Buy Black Plating.
There was no indication of fitment on the '20 mt09, but I was able to install it normally.
Simple is good.
I would have been happy if the price was a little lower.
But I am satisfied with the results.
View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900
z900rs TricksterRadiator guard
[How is it used? Just installed and only used a few times.
Was the one you received as per Image? Parenthesis as per image.
Was the installation difficult? It was relatively easy to install.
How was your experience with it? Parenthesis looking good
[Included Parts:were they on? A complete set of screws, bolts, etc., as well as a Catalogue and Sticker were included for installation.
[Was there anything that disappointed you? None to gain.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's highly effective because it's where you see the Pad.
The Radiator is the most visible part of the bike, so replacing the rusty OEM will change the impression and make the whole bike look better. After 4 years of use, it still has a bit of a shine to it as you can see in the pictures. The design of the Landmark is understated and unobtrusive. The design of the mesh is also good, with 3 sections for parenthesis. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
To protect your beloved Radiator.
Installation is easy enough for anyone to do.
If you are concerned about this, please remove the Cowl before doing so.
View detail
Good Design
I wore it on my '19 zx-6r.
I bought it as well as a dress-up because I've been getting dents and scratches on the Radiator from stepping stones and other things without realizing it.
It's a bit of a challenge, but you can wear it without removing the cowl.
By the way
The zx-6r has a water temperature gauge, but I wonder if it's because the wind against the Radiator has decreased! I can't say that's absolutely true, as temperatures and driving conditions don't always coincide, but I think the average water temperature has gone up a couple of degrees.
View detail