Reviews
Drilling holes in the Exhaust SystemBody...
Motivation
I am trying to muffle the TricksterShotgun on my GPZ1100 (water-cooled) and purchased this product because Universal's Inner silencer is not as effective as I thought it would be.
Was the one you received as per Image?
It is a type that is attached to the outlet of the Silencer, but unlike the Universal Product, it was just the right size for the outlet diameter of the TricksterShotgun.
Was the installation difficult?
Insert it into the outlet portion, drill a screw hole, and bolt it in place to complete the process.
How was your experience with it?
The objective of muffling the sound was achieved.
[Included Parts:were they on?
Installation bolt nuts were included.
[Was there anything that disappointed you?
I don't know if the strength of the outlet of the Shotgun Exhaust System's GP type baffle is strong enough to handle the exhaust pressure. I am not sure if the strength of the outlet part of the GP Type Shotgun Exhaust System is strong enough to withstand the exhaust pressure, so I hesitate to drill a hole in it.
[Others]
No instruction manual, etc. is included, but you can find it on the homepage. Prolonged use or driving at full throttle with the End Baffle installed is not recommended." I thought it was only used to temporarily reduce the volume, not always for sound deadening. I would like you to consider making a baffle on the exhaust pipe side in the future.
View detail
SC project gp70r installation ok
Installed in Exhaust System of Title notation.
Because the original exhaust system is without Baffle setting, it is necessary to open the hole for fixing Baffle. The sound deadening effect was high, and only Baffle without Glass Wool was able to deaden enough. The end Baffle for the φ70 with an angle is not easy to find, and the angle of the gp70r is almost perfect.
View detail
I feel like this is too much to pull off...
[How is it used?
I used Nojima's Full Exhaust System + Harada Silencer on my XJR1300C.
I chose this product because the volume of Harashow is too large and I want to reduce the volume a little.
Was the one you received as per Image?
No, it wasn't. I thought it was the StraightPunching of the 38φ, but there was a lid on the exhaust path on the way.
Once it hits the lid, it is discarded to the side and exhausted back into the punching again at the back side of the lid.
It's a simple bulkhead structure. This is too bad.
Was the installation difficult?
As I said, it was too loose, so I cut the end off a bit and drilled four M10 holes in the lid.
How was your experience with it?
Well, processing was necessary in my case, but it is good because it became the volume sound quality as I wanted if I processed it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it's a bulkhead structure, it should be properly described.
View detail
Surprised
GPZ900R(ZrXZrX1200 DAEGExhaust SystemSpec. ).
I bought it with just a feeling I wanted to decrease the volume, but it got quiet as soon as it was on the inspection. The high rev range gives a comfortable sound.
Performance far better than Universal Product's Inner silencer and Baffle.
If you set Light Throw setting you will run without problems and again Torque has become much better.
After all I felt Baffle the best to use the exclusive one.
View detail
"It attached to titanium silencer GP-LOOK outside diameter of phi 70. Although the silencer body was not explosive sound roaring because of the inside diameter is phi 45, the neighborhood's feeling was worrisome at the time of the warm-up at night or earl
"It attached to titanium silencer GP-LOOK outside diameter of phi 70. Although the silencer body was not explosive sound roaring because of the inside diameter is phi 45, the neighborhood's feeling was worrisome at the time of the warm-up at night or early morning, and maintenance. As for the sound volume after attachment, it is not like a normal muffler, but it seems it may be ok to blow empty at the time of maintenance at night, and it is also likely to pass an automobile inspection depending on a model. Moreover, since there was admiration attached clearly when seen from back after attachment, less conspicuous with the dirt by secular change could not be waited, and I did it on myself of the lusterless heat-resistant black. Since the level could not be maintained easily but troubles were suffered by attachment when making a fitting hole in a silencer, two-person work is recommended." View detail