Reviews
Contrary to appearances.
It was hard to get used to because of its shape, but when you try it, it's very functional.
It can be used for more diameters of hose than PliersType sticking removal tool. Of course, the Hose can be removed securely.
If you insert it into the end of a stuck hose and pull it towards you, you can use your body weight to easily remove the sticking. There is no risk of injury unless you are very unburned.
Storage is hard to keep neat, so I put the Protective Tube that is installed at the time of sale on the end and throw it in the toolbox.
View detail
Strong and durable
The tip of the Bit is very strong and durable, so you can use it with confidence. View detail
MORIWAKI Bean-jam-filled wafers (Monaka) To fix the Baffle in
As the title says, MORIWAKI Bean-jam-filled wafers (Monaka) The Baffle is made of Bean-jam-filled wafers with a potato screw from the inside diameter of the Baffle. (Monaka) Because the wrench is screwed into the inner diameter, it is too long to be fixed with a normal wrench. Thanks to this Wrench, I was able to fix it easily and firmly.
It is a SPECIAL Knife tool even if it is not used frequently.
View detail
I can't work without it!
CRF250L I'm on a MD47.
This 14mm Hexagon socket is required to remove the front axle shaft when replacing the tire.
View detail
Very good quality. Does not rust. Tolerances are perfect. The plastic handle is better than expected. Great bike tools. View detail
It's pretty handy!
Hexagon socket is a must when servicing your Motorcycle!
As you would expect from TONE, it's accurate and very easy to use!
View detail
I knew it. TONE.
I had to use it just to remove the Bolt of Brembo caliper to Titanium, but it fit perfectly and I was able to remove the Bolt smoothly. View detail
Let's use the proper tools for maintenance.
I use this brand for removing and installing the Rear Axle Nut on my 2007 wr250x and wr250r. The torque is 12.5kg, which requires strong torque control, so a proper tool is necessary, so I never use a cheap one even if it is a little expensive. The pressure on the bolt and the angle of fixation are completely different from the cheap ones. View detail
[Contents] is substantial.
It is a Penetrating Driver, so it is very effective to use it with the Hammer. [Contents] You can use it efficiently in various situations. View detail
Improving Maintenance Efficiency
It is difficult to remove the bolts and nuts from the box wrench in a narrow place The T-type wrench makes it easy to apply force and rotation It's easy to install and remove the Bolt because it's a replacement docket There is universal nature of wrench, and it is very easy to use I don't use the part of the Socket that exists yet, but it may be useful in the future It would be better if Plus and Minus Bit could be installed as well View detail
Compatibility with the company's Wrench Outclassing.
I use it with RM - 10 + RA 2. Like RM - 13 + RA 3, ease of use, appearance, all are satisfied. Adapteretc. Cheap Gear wrenchetc. There are things that are not connected well, but thanks to the combination of the same Manufacturers, it is easy to use and connected with certainty.
If I am the same Manufacturer, I think that looks are good.
View detail
I think that it is good for on-board tools.
In combination with the company Ratchet Glasses Wrench RM - 13, it is regarded as one of in - vehicle tools. Because Wrench is also TONE, I feel that the unity of appearance is also good. Also, the connection between Adapter and Wrench is also very good. View detail
Why is Webike selling higher than the list price.
I tried to purchase Pliers with high Cost performance with 150 mm size Simple, Shrimp and TOPetc. I bought it here compared with.
It is worth noting that the data posted on Webike is from previous MODEL or is completely different from the data of CP - 150 currently on sale. Since the performance of the data of the current MODEL is improved more than the published data, we recommend you to check with Manufacturer HP if you are considering purchasing.
By the way, the quality of the product is very high, it is natural but it does not compare with the on-board tool. Once you use good quality Pliers you will no longer feel like using an on-board tool.
It is not a very expensive tool and it can be recommended for many people because it can be used for a long time.
View detail
Unexpectedly not particularly dissatisfied that it would not be able to withstand high Torque
Recently "Lock" As visiting sales of Tone's agency called near the workplace, I asked for this.
There is an adapter for Ratchet glasses that is similar to KTC, but over there is 9. 5 mm, 3 / For 8 Inch angle, here is 6. 3 mm, 1 / It is for 4 Inch square.
By the way, in the case of Tone 12. 7 mm, 1 / For 2-inches and 3 / There is also for 8 Inch, RA 4,1 / Anyway for 2-inches 3 / As for domestic for Vehicle for 8 Inch, it is for 13 mm glasses which can not be said to be used frequently for flattery, and the KTC products corresponding to 14 mm will rise in ranking.
I bought it for use in a place not very high Torque, but it is quite useful although it is low use frequency.
On the other hand, it is a problem that it is too small and there is a possibility of loss, too Small is too hard to press release button. There is nothing I can do but I have no choice but to give up.
1 / When used in combination with spinning disc for 4 Inch, it is quite easy to use and is a good feeling.
View detail
TONE Tone Socket holder SH412
Hold number 1 Quantity : 2pc. I bought SH 412 of Set, but I changed the Clip to Quantity : 2pc. Set Remove The number of holds has been set to 10. Quantity removed : 2pc. Set Clip is handheld SH 406 (Hold number 6 pieces) We installed the number of Hold to 8. With this, SH 406 & SH 412 (Actually it is SH 410) It was a nice feeling. I bought SH 412 aiming at this effect. Clip installation & removal is easy.
Hold number 6 SH 406 is a little more clip and I feel like Hold number 1 Quantity : 2pc. Set's SH 412 seems to have too much clip, so we recommend SH 410 with 10 Holds.
Product of K company is uneasy because durability is not good because desorption response is not good because Clip is resin.
K company's warehold entrance.
View detail
It is an essential item.
When Maintenance and Custom are done, there are Screws that can not be turned by a normal Driver. But if you have this, use it with Single Body, or PlusMONKEY Wrench or Spanneretc. When used in combination with the tool of Torque by Toru, the Screw of the Large side turns. Because it is a Penetrating Driver, it will not break even if you hit GunGun with Hammer.
Plus minus also comes with 3 Size each and is user friendly. It was a half price at Sale this time, so I had a great deal of sense.
View detail
It was attached by the bolt head of thinness with an Earth Bolt of the Cell of a DJEBEL250 surprising in a surprising position, and if he simply had this [ no ], it was not able to remove. Since each Long straight was high, an order for this comparat
It was attached by the bolt head of thinness with an Earth Bolt of the Cell of a DJEBEL250 surprising in a surprising position, and if he simply had this [ no ], it was not able to remove.
Since each
Long straight was high, an order for this comparatively reasonable was placed.
Saved ~
View detail
It is a Manufacturer which is different since there was no 12.7sq although 9.5sq was using the Socket wrench set of KTC. It is easy to put in power that KTC receives cylindrically and TONE tends to grasp the form of the portion grasped by the hand by
It is a Manufacturer which is different since there was no 12.7sq although 9.5sq was using the Socket wrench set of KTC.
It is easy to put in power that KTC receives cylindrically and TONE tends to grasp the form of the portion grasped by the
hand by even structure.
Since it is 12.7sq again, it is weight strong [ structure ] and moderate.
This one is safer when applying a strong Torque.
It is whether it is [ feeling / both ] the same to have turned structure of
Ratchet part.
View detail
It found that the father treating the engine for races of the shop had removed the round and round and the bolt by T type wrench, and when the parenthesis was good, it had a longing and purchased. Very much, although imitation is impossible, it is con
It found that the father treating the engine for races of the shop had removed the round and round and the bolt by T type wrench, and when the parenthesis was good, it had a longing and purchased.
Very much, although imitation is impossible, it is conveniently used in itself.
View detail
It is used for the ratchet glasses of [Webike monitor] KTC. It does not fall, when an adapters has a ring for safety catches and ratchet glasses are equipped. Moreover, Locke of the socket sticks and a socket is also fixed. It is very easy-to-
It is used for the ratchet glasses of [Webike monitor] KTC.
It does not fall, when an adapters has a ring for safety catches and ratchet glasses are equipped.
Moreover, Locke of the socket sticks and a socket is also fixed.
It is very easy-to-use.
There are 1/4, 3/8, and 1/object for two, and it arranged all.
View detail