Reviews
3/8 might be better for the final tightening.
I would like to add that the product description was missing.
This is a Hexagon socket with a 6.35mm (1/4Inch) insertion angle. This size is 4mm.
2.I bought everything from 5 to 8mm at once.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
For 8mm hexes, the Torque is so large that it is safer to use a 3/8 insert depending on the location, but for hexes located in tight spaces or at the back of the room, a slim 1/4 is not acceptable.
I am using a 3/8 hex socket made by KTC, but the hex shaft (tip bit) is screw-fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
Can I recommend this product to my friends and acquaintances? ⇒ YES... You can RECOMMENDATION.
View detail
Compact 1/4 Inch Socket is convenient!
This is a Hexagon socket with a 6.35mm (1/4Inch) insertion angle. This size is 6mm.
2.I bought everything from 5 to 8mm at once.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
Can I recommend this product to my friends and acquaintances? ⇒ YES... You can RECOMMENDATION.
View detail
I like the way it's built with no Bit missing.
I would like to add that the product description was missing.
This is a Hexagon socket with a 6.35mm (1/4Inch) insertion angle. This size is 4mm.
2.I bought everything from 5 to 8mm at once.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
View detail
Recommended by KTC
I would like to add that the product description was missing.
Hexagon socket with a 6.35mm (1/4inch) insertion angle. 3mm in size.
This time, I bought everything from 2.5mm to 8mm.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
View detail
Recommended by KTC
I would like to add that the product description was missing.
Hexagon socket with 6.35mm (1/4inch) insertion angle and 2.5mm size.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
View detail
Made by TONE for peace of mind. Personally recommended over KTC.
I would like to add that the product description was missing.
This is a Hexagon socket with a 6.35mm (1/4Inch) insertion angle. This size is 5mm.
2.I bought everything from 5 to 8mm at once.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
Can I recommend this product to my friends and acquaintances? ⇒ YES... You can RECOMMENDATION.
View detail
conversion
I bought it to install a plug wrench on a small type ratchet. View detail
Convenient for Socket extension
It is very useful to extend the socket with extension bar which is essential for maintenance and custom work. There are a lot of tool manufacturers, but Tonne is good quality and reasonable, so it is easy to handle. View detail
Thin and strong.
It is convenient for removing DoorLining and Meter panels, and can avoid damage to panels with hard clips.The shape of the remover is easy to fit into the gaps between panels for easy removal. The shape of the remover allows it to be easily removed from the panel. View detail
Effective in tight spaces.
It can be used to work in tight places where the angle of the Long does not work or where the Glasses Wrench does not fit. I was able to replace the Neutral switch in the back of the car with ease, and even with the Short you can still get the Torque you need. View detail
Convenient swiveling function
It is very effective for use in tight spaces where the Straight cannot fit due to its lack of angle. The extension bar allows for pivoting and is an easy length to use. The price is reasonable and the functionality works well beyond the price. View detail
To adjust the Chain.
If you have a Motorcycle Chain, you can adjust it by yourself. The thing is sturdy and will probably last a lifetime. View detail
Suitable for Bar End removal.
Some people think that because the Kawasaki Bar End has a full locktite, you need a shock driver or impact driver to loosen the bolt. It is cheaper than buying an Impact Driver or paying at a motorcycle shop. View detail
The best
Gear wrenches are supreme with this tone pivot. I think the original was SIGNET, but the tone is the best. Even if you don't have all sizes, 8 10 12mm will change the world. I can't go back to the ordinary glasses anymore, even Rocket's Ratchet can't be used. It feels tedious. By the way, Gear wrench is the R in SIGNET, so to be precise, Tone is Gear I'm not a wrench, but, I don't need the details, right? View detail
TONE Torx Socket
Tone torx socket is very useful to open the torx nut. Especially do not scratch the screw head and not be worn when opening the type of snail View detail
TONE Torx Socket 3/8
tone torx socket is very good, the material is very hard, so no screws are damaged when tightening, the finish is quite good with bright surface. The design is suitable for many working conditions. Especially handy when used. I very like it View detail
Quality as well as design is good
SK11 as Socket with similar performance "Bolt catchSocket" And Koken's "Nut grip" , And FPC "Catching Socket" There are, but since we actually purchased other than SK 11, this time TONE's "Nut catch socket" I would like to imprint.
Clearly, as none are designed under similar Concepts there is no difference in the performance in terms of performance. Perhaps the cheapest SK11 also has no problem performance, but the difference will be quality and durability. As long as you are not a mechanic at PRO, try SK11 and if you like it you think that it is better to buy famous brand items.
What I was curious was Design wrapped around SK 11 and Koken's rod Spring. TONE has adopted Board Spring as opposed to thinking that their appearance is not so beautiful, and I personally prefer this Design.
However, personal recommendation is made by FPC. The reason is that none of SK 11, Koken, TONE has the property that it is difficult to remove NutSingle Body from Socket, whereas FPC releases the Tension that sprung on Ball by spinning a hemispherical depression It is because it allows you to retrieve Nut easily.
Although it is a personal opinion to the last, if ranking the performance and quality as Socket (1) Koken (2) TONE (3) FPC (4) SK 11, and focusing on the Grip mechanism (1) FPC (2) (3) Is koken - Either TONE (4) SK 11 and Cost performance as Sunday mechanic is (1) SK11 (2) (3) (4) Is Koken - TONE - It is the impression that it said either one of FPC.
There are lots of work in narrow places, so if you drop down Bolt it will become an Large canon in such places that you can say that it is indispensable for this type of Socket surprisingly many options, please try looking for quality and price.
View detail