Reviews
If used gently, it will last somewhat longer.
[How is it used?
It is used during Tire replacement &Puncture repair work on Dual Par Pass cars.
Many Dual PurPass vehicles that enjoy mountain play and forest roads use a Tube in the Tire, so these Items are very useful for getting the Valve of the Tube out of the Valve hole in the Rim.
Wire is thin, so be careful when working with it, as the handle clasp can easily come off or the wire can easily break if pulled with force.
Did you receive the item as per the Image?
I used to use a similar product from another manufacturer, but it was used roughly and broke, so I bought this product, which was a little cheaper at Webike at the time.
The product was as per the Image.
How did you like it?
Once you get the hang of it, you can easily pull out the Air Valve in no time at all.
Especially in winter, when tires become hard, I can't do without this product.
[Points to note]
As I wrote above and others have written. "Forced to pull by brute force." The product is fragile when you try to pull it out.
Although Manufacturer is different, if you search for DRCAir Valve Puller in the product introduction section of Webike, you will find a video at the bottom left of the introduction section that explains it in an easy-to-understand manner. If you are not sure how to use it, please refer to the video on YouTube.
How did it compare to other products?
I used to use DRC's Air Valve Puller before this product, and my personal impression is that it was easier to use DRC's Air Valve Puller because the Wire tends to rotate when Screw-tightening the Valve. (Possible individual differences) 。
Other items that would be helpful
Point and hang of installation
With your free hand, press lightly on the backside of the valve of the tube toward the rim while guiding the tube.
The rest, as I mentioned above, you can watch the video.
Basics We're not in a hurry. We're going to do our job well and reliably." is the best shortcut.
[ITEMS TO BUY TOGETHER
Prepare Lever, BEETWax, Inflatoretc. for Tire removal and attachment separately from the things to be replaced.
[Opinions and requests to Manufacturer
It would be nice if you could use a stronger wire to ensure durability, but we would be grateful if you could just keep this product in the lineup.
View detail
Great value - Must have for blind bearings
A must-have for double-blind bearings that you need to remove for engine overhaul.It worked great in the blind transmission bearing. It didn't work for some jammed swing bearings, but the collet kept its grip until the bearing seat began to twist. It's not the fault of the tool, it's a testament to how tight these races are.When your bearings need replacing, this bearing remover hits the bearing so evenly that it takes very little effort to use. I would use brass rods and hammer around the bed to get it out and sometimes that just wouldn't work. But that means you slide, compress, and quickly shift the weight up to push the mattress out. This is one of my most appreciated tools. And the protools price surpasses other competing products that appear to be of similar quality. I had no issues with this tool. It probably even works on my bike beds. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Extracting RCValve from NSR250R
It is safer to purchase and remove RCValve since it costs about 2000 yen. Since RCValve is no longer in production, it is important not to break it, use this items, etc., and work in a way that does not break it. View detail
It was really useful..
I tried to exchange the XR 250 's Tire and purchased it. The work of setting Valve of Tube became much easier to do and I was able to shorten the working time of Large width.
I am useful!
View detail
It is convenient to have
Even if it is not necessary, it will be anything else but it is convenient.
Especially when you become a Puncture repair in the mountain instead of Garage, promptly
I'm putting it in an in-car tool as I want to do it.
It's not that heavy either.
However, I think that the price is too expensive as it is a self-made tool if I want to do it.
View detail
Piston Pin lightly escapes!
Used to remove Piston Pin of RZ 250 R. Pin was punched and it was not easy to get out, so purchase this product. After setting Puller, just by turning it in Wrench, Sulur and Piston Pin are missing. Although the difficulty can be used for each Size, on the other hand, I think that it is better for you to have Rubber sheet because Puller's surface will not be Fit and Piston will be scratched.
It was good that I could buy it because I got out of it without difficulty.
View detail
Usability Exclassing
I have participated in Enduro for about 10 races a year, but I tried to buy it because of frequent Tire exchange.
Use feeling Outclassing It is a tool box.
I've been getting better recently and I've been less frequent
View detail
Fits: HONDA glom, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50 (AA04)
cheap
I purchased to remove Flywheel.
The price was also cheap and could be used satisfactorily without problems.
Performance and saying, accuracy There are no comparison objects because there is no object to compare, but
I do not inconvenience at all.
View detail
Although he thinks that it is not needed for the tire replacement of a bicycle, and Puncture repair, even if it thinks later that it is like convenience when the Tire of a Motorcycle takes out firmly and is used, and what was necessary was just to have bo
Although he thinks that it is not needed for the tire replacement of a bicycle, and Puncture repair, even if it thinks later that it is like convenience when the Tire of a Motorcycle takes out firmly and is used, and what was necessary was just to have bought it too, going to buy it is troublesome. It does not leave for a regret place, but I would like for providing is preventing and tire replacement to be careful, and to desire them. View detail
A price is handy and structure is also solid. Since the Valve Puller of DRC used now was a life soon, it purchased. A thing is the touch which is not different from the thing of DRC. The Wire is also solid. Since the price is cheap, it is large satisf
A price is handy and structure is also solid. Since the Valve Puller of DRC used now was a life soon, it purchased. A thing is the touch which is not different from the thing of DRC. The Wire is also solid. Since the price is cheap, it is large satisfaction. View detail
Since it is a Yamaha original manufacturer's product, it is satisfactory at all with a natural thing.
Since it is a Yamaha original manufacturer's product, it is satisfactory at all with a natural thing. View detail
It is used in the case of tire replacement. although it is rather troublesome to take out the Air valve of the Tube -- -- if there is this, it will be able to do in one shot. although the Wire is only attached to the stick like the
It is used in the case of tire replacement.
although it is rather troublesome to take out the Air valve of the
Tube --
-- if there is this, it will be able to do in one shot.
although the Wire is only attached to the stick like the
photograph --
-- letting this pass from a Wheel -- it is wearing to an Air valve.
Troublesome work will finish after
only as pulling.
-- although work is possible even if there is nothing --
-- it is better to be able to do quickly.
♪ which is a Recommendation since it becomes
time reduction
View detail
If there is nothing when Colet has, workability is completely different. Since after [ ] irritation is canceled, a mental health top is also GOOD.
If there is nothing when Colet has, workability is completely different.
Since after [
] irritation is canceled, a mental health top is also GOOD.
View detail
The troublesome work of the Tube at the time of tire replacement finishes with an instant. Even if there is only several turn in the year, it is a fully worthy tool! It is high recommendation!
The troublesome work of the Tube at the time of tire replacement finishes with an instant.
Even if there is only several turn in the
year, it is a fully worthy tool! It is
high recommendation!
View detail
In carrying out a tire change for the first time, it purchased. Although wearing was easy, it needed to be pulled adjusting not touch but the valve position that what is necessary is just to pull strongly. Since there was much especially connectio
In carrying out a tire change for the first time, it purchased.
Although wearing was easy, it needed to be pulled adjusting not touch but the valve position that what is necessary is just to pull strongly.
Since there was much especially connection by an outlet part, I considered that it was better to give a radius of circle to the form at a tip to a slight degree.
the Mus time -- also carrying out -- since it is pleasing that it can do and that anodized processing is carried out, I will make evaluation into four stars.
View detail
Since it corresponds to M28 and M26, if a screw suits, it can use also for other vehicle types. I purchased for spacy 125 (JF02E) business. Since the dream is M28 exactly, and it can use as a puller of two engines also by chance, it is satisfactor
Since it corresponds to M28 and M26, if a screw suits, it can use also for other vehicle types.
I purchased for spacy 125 (JF02E) business.
Since the dream is M28 exactly, and it can use as a puller of two engines also by chance, it is satisfactory.
Since the hexagon-head part of the somewhat expensive kana ? outside is 35 mm compared with the puller of the other company, a big adjustable wrench etc. are needed for a baffle.
View detail
The first tire change must have been more serious when there was not Colet. I think that it has and there is no loss if it is those who fix by themselves although it is not a so always used thing.
The first tire change must have been more serious when there was not Colet.
I think that it has and there is no loss if it is those who fix by themselves although it is not a so always used thing.
View detail
Even if there is nothing, become somehow, but. it being, or becoming, and pains being taken for a hard tire to carry out bulb appearance before being one convenient article, furthermore. it purchased because there is also such elegance, when using
Even if there is nothing, become somehow, but.
it being, or becoming, and pains being taken for a hard tire to carry out bulb appearance before being one convenient article, furthermore.
it purchased because there is also such elegance, when using instantly,
the kana ? tip where the one to a slight degree which could pull out the bulb easily only by pulling, bought it, and thought was good, which existed that the head is caught in the rubber of a rim band and it is however hard to escape from it, and where the head is thinner is easy-to-use -- the Mus time -- also carrying out, although it seems that it can do,
when kept firmly, power was not put and was not able to loosen -- since it thinks that there is a point of improvement to a slight degree -- four stars
View detail
If it is, I will think that it is convenient. It is the highest at the drawer of a tube. If there is a finger technique even if there is nothing, you will become somehow, but does it take time 3 or more times? In time loss or a direction not t
If it is, I will think that it is convenient.
It is the highest at the drawer of a tube.
If there is a finger technique even if there is nothing, you will become somehow, but does it take time 3 or more times?
In time loss or a direction not to get tired with, I think that they are wonderful goods by a tire change.
Please use!
View detail
It will not start, if there is this [ no ] in removing a flywheel. The direction in which especially a skid base is opened is indispensable. In a pure tool, I think that there is no loss even if it has once, since it is cheap. It can use not t
It will not start, if there is this [ no ] in removing a flywheel.
The direction in which especially a skid base is opened is indispensable.
In a pure tool, I think that there is no loss even if it has once, since it is cheap.
It can use not too bad especially.
Mind which it will seemingly be pure, is high as for reinforcement, and breaks is not carried out.
But with an attached stick, it cannot turn by any means.
Let's turn [ glasses ] gently, applying it.
and -- although this is a digression -- a cub -- a system engine and CB -- also when removing an engine flywheel 50 (ape) system, it was able to use.
The size of the screw thread currently turned off is the same.
Although it may be able to use for other vehicle types of other manufacturers, I need your help by self-responsibility to the last.
View detail