Reviews
Fits: HONDA CT125・CT110 HUNTER CUB
Ponting and Custom
The overall construction is solid, and the welding and surface treatment are clean.
If you have a Hexagonal Wrench Set and a Driver, it will take about 30 minutes to complete.
There were no pictures of the inside in ManufacturerSite, so I personally used a mesh filter to prevent Garbage suction. (Gold web) DIY.
So, I personally ??Minus1.
View detail
The product is totally different from the picture. Not usable.
I was offended when they sent me the wrong product. View detail
Fits: HONDA MSX GROM, HONDA GROM
Power does not change dramatically, but ….
I could do the work myself if I could install the air intake to the product and remove the tank shroud, side cover, and bolted parts on the inside to the air cleaner location. Of course, you are responsible for your own work.
The effect was a little more power at low RPMs, or more persistence, or maybe a little more power. I felt a little more power at low rpm.
The effect is not dramatic, but it is satisfying because it is work that you can do yourself.
I guess the cosmetics are not very good…….
View detail
Cancellation
Please Cancellation because of the late delivery date. View detail
Twill weave is very Parenthesis good!
[How is it used?
Tank, SIDE, Chain, and Air cleaner all in the Twill CarbonSeries by FalseDesign!
Was the one you received as per Image?
It seems to be thick and sturdy. I was also reassured by the high precision of the construction.
Was the installation difficult?
Although the tank needs to be floated, it can be easily installed using only a Phillips screwdriver. It is highly accurate and smooth installation.
How was your experience with it?
I have no complaints about the material, gloss, etc. The durability seems to be promising. Above all, the design is superb. The mesh that peeks out a little is casually Race ish.
[Included Parts:were they on?
Instruction Manual and Sticker are included.
[Was there anything that disappointed you?
No, but twill weave Type has a slightly higher price tag.
▼Because there is no uniformity if you buy just one, you will end up with a Quantity:You will want to purchase a Set.
View detail
Fits: BMW RnineT, BMW RnineT Pure, BMW RnineT, BMW RnineT /5, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S
It's just too expensive.
Color of RnineT:Purchased to replace Unpainted Pearskin Resin Section Parts sequentially.
I actually bought a similar Chinese Ver from Amazon before this.
The forceful way of fixing the resin parts with wooden screws discouraged me from using it.
I knew it would be expensive, but I chose the Wonderlich product, and I think it was the right choice.
First of all, the Screw that comes with the Wonderlic is Torque, as is the case with other parts made by Wonderlic.
Since there is no Hex in the Bolts used by OEMs, it is important to unify these Bolts.
Installation is also simple, with a part sandwich, part pipe clamp, and part double-sided tape installation method.
Fitting is good.
The price is high, but there is nothing I can do about it because I can't buy it too cheaply even if I try to import it myself, so I have to give up.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA WR250F, YAMAHA WR250F-WR426F, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA WR426F, YAMAHA YZ250F, YAMAHA YZ400F
Necessary when washing car
Air box cover, a must-have for washing off cars.
When washing a car with a high-pressure car wash machine, water can get into the FilterBox, so this Cover prevents water from getting in.
One drawback is that the screws on the YZ125 filter are long and difficult to install, as is the case with the OEM filter cover, which is also long and difficult to install. It would be better if the screws could be made a little shorter,
View detail
poorly made
Installation is easy enough for anyone to install without any problems.
However, the air intake netting is just popped on with Bond and comes off with just a touch of the finger.
Even though it is made in Japan!
I was disappointed.
As shown in the image, the Bond installation of the netting can be taken off loosely.
View detail
Useless.
As soon as I unpacked it, I was like, "Can I use this? I was under the impression that it would not fit the conical Element. I didn't think it would fit the conical Element. I made a tentative fit and sure enough, it worked. I had to pay more than 4000 yen to Garbage, and I am very angry. View detail
Fits: YAMAHA Majesty S, YAMAHA SMAX, YAMAHA FORCE155 [BH9]., YAMAHA FORCE155 [BH9].
KOSOAir cleaner cover
Refreshing around the Engine, looks good, Large satisfied.
However, when removing the Air duct from the OEM and putting it into the Air cleaner I purchased, the process was Large strange, so for the price, I thought it would be better to have it installed from the beginning.
View detail
It is good that it is not very noticeable.
It took a long time to deliver, but the quality is good LargeChange. I chose the color WITHOUT Gloss. At a quick glance, it looks just like the OEM and is unobtrusive and unobtrusive. View detail
Maintenance around the rear suspension is easy.
When modifying the rear suspension area, removing and installing the OEM air cleaner duct (?) is quite a hassle. When modifying the rear suspension area, it is quite troublesome to remove and install the OEM air cleaner duct (?).
[How is it used?
daily use
Was the one you received as per Image?
Slightly cheesier (PeLePera + a little less molded)
How was your experience with it?
no problem
[Points to note]
nothing special
How did it compare to other products?
The ones from other manufacturers are quite expensive, but this one is reasonably priced!
Point and hang of installation
Hexagonal Wrench and +Driver are required for OEMDuct removal.
The process takes about 15 minutes, of which about 14 minutes is for OEMDuct removal (it's pretty tricky).
Installation is only by tightening 3 ScrewScrews.
It looks neat and makes it easier to replace the Rear suspension and install the Side bagBracket.
View detail
high level of cost performance
I was concerned about small dust particles because it was an inexpensive product, but once it was installed, there was no problem. I think the cost performance is good because it is definitely cheaper than other companies' products.
It was easy to work with and required no processing. I am generally satisfied.
View detail
It looks better.
When I changed carriers, I was using the AirFilter Duct in the opposite direction, but it didn't look good, so I bought this product.
I thought it was a bit expensive, but there were no alternatives and this was the only choice.
The adhesion of the net part came off when the screw was tightened, but it was repaired with adhesive and used again.
View detail
Installed after Carrier replacement
I purchased this product for post-processing of air filters as they were replaced from OEM Carrier.
It is very simple to make and costs almost 4,000 yen? But it may be inevitable because the quantity is not available.
It is fastened with three screws, but when fastening, there was a snapping sound and the mesh part came off.
Since they are only attached with glue, the initial glue seems to dry and peel off easily.
Now that it looks cleaner, I'll use it for a while anyway.
View detail
CHALY
Thanks for the fast shipping!
The bees are looking good.
View detail
It was installed without any problems.
Originally, this product was designed to be used without the OEMRear Carrier, but I was considering purchasing it to remove the OEMAir Filter Cover because the OEMAir Filter Cover was in the way when I loaded luggage in the front with the OEMRear Carrier, and it was difficult to attach the luggage strap for fixing the luggage. I was considering purchasing this product to remove the OEMAir Filter Cover.
There are other similar products, but they are more than twice the price of this product, and there are also some impressions that the position of the mounting screw does not fit, so I hesitated to purchase this product. We purchased this product because of its reasonable price and Webig's product conformity guarantee.
The installation was done without any problems, with no misalignment of the screw hole positions.
The mesh for air intake is bonded under the right side of the product, but it is a little bit messy, and when I lightly touched the mesh with my hand, part of it peeled off.
When the filter is installed, there is a gap between the motorcycle body and the upper back side. Rainwater and insects may come in, but water will escape through the mesh and insects will be blocked by the filter.
Compared to other existing products, it seems to be better, including the price.
View detail
Compact and solid presence
The OEM Air Cleaner Duct was installed in a highly waterproof location, but because of this, when strapping it to the carrier, the duct cover was in the way and there were areas where it was not possible to strap it on. I bought the duct cover because it was too bulky and when I removed it, I needed to plug the hole where the duct had been stuck.
The size is about the same as an OEM DuctHose cut in half, so it's not obtrusive, but it's also fashionable with a subtle statement.
The Stainless Steel polish looks better on a Red body than on a Khaki body.
The installation process is simple, but I think it is relatively easy since it is a step-by-step replacement of the Air cleanerFilter.
The fixing method is a pot bolt on a flange nut, but I applied Screw lock to prevent it from loosening.
View detail
pe24 filter type2
About quality and texture It looks like a waterproof cover, but it's like a net. It's going to rip faster than I thought About the feeling of use It looks like there's nothing wrong with breathing in air because it's a net Since it's rainy season, the bike is on standby, so I bought it to defend against foreign substances Products to buy together SPTAKEGAWA Air Filter (Type-2) (Taper / 46 mm) Difficulty of installation be easy to install Cost performance and comparison with other products It's not expensive if you think it's necessary About shipping and packaging It took a week and the packaging was great Any concerns, cautions, or advice when purchasing I think it protects the filter and it's expensive to buy Because the same filter is similar in price I don't recommend it unless you're on standby for a long time View detail
Junk product
For $US60 this product was a total rip off. A small piece of bay made plastic with bad fittings. Could not make it fit the bike at all well and ended up unlevel and looked terrible while not holding the rubber hose part at all well. Very disappointed and if I get another part like this from Webike I will not purchase anything again from them. View detail