Reviews
Perfect for long distance touring!
I occasionally go camping touring on my Ninja 250SL for long distance trips of about 500 km each way and overnight stays.
I bought this because I want to charge my iPad mini, my phone, Mobile Batteryetc.… and many other things that I bring with me.
Frankly, the price is high, but the build quality is ◎!
Week Point is that the Connector part is a little easy to pull out, and the price is too high!
Overall, it's a RECOMMENDATION!!!
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, SUZUKI GSX1300R Hayabusa, KAWASAKI ZX-6R Ninja, KAWASAKI ZX-10R Ninja, HONDA CBR600RR, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R3
Precious H7LED
I think this product is of interest to my brothers and sisters whose headlights are H7 models.
There are few products, especially those that are sealed-compatible.
Considering Waterproof and heat dissipation, we arrived at this product.
Space behind the Light was more necessary than imagined, and the Control Unit was heavy and of a reasonable size.
The V-strom650 had plenty of room in terms of Space, and there is a solid Bracket behind the Cowl, so there is no problem.
It was fine until I wrapped the double-sided tape around the edge of the light case and attached the WaterproofBoots.
When attaching the Heat Dissipating Ribbon to the Valve unit to hold the Valve in place, the
Since the valve unit is compact, the part that comes out of the boot is short, and it is necessary to screw it in while crushing the boot, which gives the impression of a forced installation.
I am not sure how it will affect the headlight unit side, but since the Image is pulling the Valve all the way outward, there is a possibility that the optical axis adjustment mechanism, etc. will be stressed.
Also, a heat transfer grease is required between the Valve unit and the Ribbon, but is included.
Since it is outside of the Waterproof part, there is a concern that the car models that get wet directly with rainwater etc. will flow.
I also saw a NetReview that said the lifespan is 2 years, so that may be part of the reason.
Ribbon generates quite a bit of heat, so it is a proof of heat dissipationLeft, and stable heat dissipation can be expected.
However, depending on the car model, there is a possibility of deterioration or deformation of resin parts in contact with the ribbon, so it may be necessary to adjust the shape of the ribbon so that it does not come in contact with the ribbon.
The brightness is brighter than Halogen, but not dramatically so.
Cutline looks no different than OEMHalogen, but I think optical axis adjustment is necessary.
I was so swamped with optical axis adjustment that I couldn't quite figure it out.
I don't know how many times I have removed Cowl….
There are products that can be installed inside the waterproof cap, such as H7 and more compact products.
Compared to such products, the advantage is the good heat dissipation by Ribbon.
Long-distance travelers can expect stable brightness in terms of heat dissipation.
I think it is a good idea for a product, but there are various problems and I think there are only a few car models that can be installed without Stress.
View detail
SMART power supply
It is SMART, compact, and comes with a cable that can be connected to large devices. The price is high. View detail
The product is a good one, but...
You all wrote in the impresario, but I'm not happy with the way the Body is mounted either.
The Elastic band and the parts used for mounting were useless and I ended up securing it to the Handlebar with Tie Wrap.
It's a necessary improvement.
View detail
More expensive, but also more light
It is used for HeadlightPosition balls of MT-07Second Type Model I did
It's taller than the normal Valve, but it just barely fits in
The light level is so high that the car in front may be annoying
(That's how bright it is.)
One point, it's hard to see in the photo, but because of the directionality and the tallness of the Valve
The unevenness of the brightness in the Light case is very large
I'm generally satisfied, and I can't complain if the price is a little lower
View detail
Purchase Repeat
The previous generation had a charging problem after about 3 years of use, and I had to buy the same MODEL again
The first one is KIJIMA's USB Charger (https://www.webike.net/sd/23367011/) I was going to use it, but I saw a review that said my iPhone wouldn't charge, and I was relieved to see that it didn't charge I decided to buy the same MODEL for
USB3.0 from DockConnector to USB3.0 in accessory Cable of iPhone in comparison with the predecessor, but does not seem to change in design and performance Design and performance do not seem to change as much as the accessory Cable changed from DockConnector to USB3.0
Installation was done by connecting it to the front's always-on Accessories power supply
There is no problem with its operation, and iPhone can be charged It seems to be useful when I want to use a GoPro etc. at the same time in the future because the power supply has the maximum 3 places of Charge! It is
Unfortunately, I don't see any improvements to the Rubber that comes with it for installation
I'm not sure it's strong enough, and I don't think it's a great installation method, so I'd like to see some improvements That's where
View detail
Rebuilt as you transfer
I used Power cableKit even in the previous car, but I bought a new Power cable 2 again as I changed transfer. I am asking Shop to install at delivery.
Since there are three power supply ports, I think that there is not much to think when considering the extensibility when buying ActionCam etc. from now on. There is of course not Trouble such as charging failure even if it is used.
Although the performance of the product is satisfied, there is only one unhappy point. That is the fixing method when fixing Body to bar is Elastic band. Rubber deteriorated for less than a year at the time of the preceding car, and it became impossible to fix, so I fixed it with Tie Wrap. As usual it is a fixing method by the Elastic band so we want you to consider another fixing method in the future.
View detail
Performance, Spec. Although it is good, the initial investment amount is high.
Replacement from Cigar socket I used to date. Depending on the installation method, such as poor power connection may occur frequently. (Cigar socket gets pulled out due to vibration. )
- Wiring method
Harness has enough Wiring from Battery to around Meter, so no additional processing is required and GOOD.
Since Wiring can choose whether to wired directly with Battery, or to raise Relay to Wiring,
Processing of additional relays unnecessary. (Attachment power supply needs to search by oneself)
- Mounting method
As a prerequisite for mounting to the basic Pipe Handlebar, Bracket wraps around a bar
Fixing Rubber Only. Since it can not be mounted at all without a bar, BAD.
Ideas is required when considering how to install in places other than Handlebar.
- Feeling of use
There is no problem with particular use. Navigation, and ActionCam were connected,
Especially usable without power supply shortage. Voltage display is also 13. 8-14. It shows 0 V, and by feeding
There is no such thing as above.
It is possible to connect three types of Navigation, Camera, Radar, Compact installation possible GOOD.
- Cost
Body price, connection purchase additional purchase (MiniUSB, Connector for Navigation, Extension Cable 50?) ,
Purchase Bracket. Fact of investing nearly 15000 yen in total. More than 10,000 by power supply
Since initial investment is still high, BAD.
When using Cigar socket, since it was installed behind the Meter, Screen did not enter well and broke Screen, so much impulsive buying of Shock.
When I noticed it, I could not be caught afterward, but it is very convenient product such as introduction and usability, BodyGold genus texture etc. GOOD.
View detail