Reviews
Banjo bolt
For a safe motorcycle life, make sure to tighten the bolt securely. View detail
Protecting the Horse
The hose was rewound to the point where it meets the body of the vehicle.
It would be good to use 100-yen ones, but it is troublesome to check the Size and Fitting, and it costs about 300 yen, so I bought this one.
It is a special product and fits the brake hose just right, and the texture of the material feels supple.
Since it was only used to protect the contact point, 1m was almost too much.
View detail
Used to replace 20 year old deteriorated Normal hose.
Used to replace a 20 year old cracked and deteriorated Normal hose.
We chose this product because it is a vehicle-specific kit, so we did not have to worry about length, etc., and because there was a combination of black hose&banjo that matched the Matte Black car body.
The handlebar was replaced with a lower one than the normal one, and the direction of hose removal was different from the normal one because the Master Cylinder was replaced with a separate tank type of Nisshin at the same time& The length was a little long, but the problem of the length and the direction of hose removal were solved by making it so that the hose can be removed up like the normal type of off-car. The problem of length and direction of hose removal has been solved by changing the direction of hose removal to be up like the Normal type of the Off car.
After the replacement, the Touch is better and I can hang Brake with confidence.
View detail
Standard Custom
4mini Standard Custom??
Red and Blue Collar Accent best!
The Rear hose and Swing Arm are also a good match!
Custom feeling has increased.
View detail
SWAGE-LINE:Swage lineCopper Washer #3 installation
[How is it used?
SEA BASSOEM Parts Brake Caliper Assembly brembo STYLEMA [Stillma] For 108mm mounting
[Points to note]
Be careful when installing as it applies Torque.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R
Exactly
As expected from a car model! Everything was just fit!
I could see the difference from FirstTouch even with Normal caliper.
View detail
for Brembo
The banjo bolt was also changed in order to replace the caliper with brembo. View detail
Fits: KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400
Mesh hose for rear brake
It looks cool, the Crimp part is covered and looks luxurious and sturdy compared to other Hoses. View detail
It can be used normally
It is safe and normal. It is also normal in terms of price. View detail
It's all right.
I don't think there is any problem to use it, but the Adapter and the color of Hose are the same Manufacturer.
It's somewhat frustrating that it doesn't fit.
View detail
I would have liked to have blacked it out.
I used to use the same size Stainless Steel color at the entrance of Caliper, but I decided to change it to Black color to match the Black color of brembo's Caliper. I am satisfied with this change, even though it is only for appearance. View detail
Brake CaliperCustom accompaniment
Purchased in conjunction with Caliper replacement.
We are also considering MASTEROverhaul at a later date, so the Quantity:I think 1 pc. spare in 1 Set of 3pcs.
The inside diameter is a little loose, so there is no feeling of being snugly fitted, and you can also feel the responsiveness of the crush feeling when Torque is applied.
The thin cheap ones don't feel crushed when Torque is applied, so I'm worried about using the Torque wrench, but these are thick-walled and fine.
View detail
Slim Hose is Refreshing and ◎
I like that the hose is thin and refreshing to handle. View detail
Hmmm...
It's not too bad, but I'm a little disappointed that it's not interchangeable with other companies' products.
The company's colors are a little light and don't match the colors of the Hose, which is a little frustrating.
View detail
Instruction Manual makes it look like a quick and easy attachment, but it is not.
The Instruction Manual says that the Radiator area will use the existing brake line, so it will not be a full mesh, but it is necessary to train each part to prevent fluid splattering, as well as to remove the tank and air cleaner box, Radiator displacement is a must. The most difficult part of the Large model is that it is difficult to apply wrench due to the shape of the bracket on the Radiator side. I won't go into details, but you will definitely have a hard time.
Bottom line, leave the installation to the PRO. If you want to do it yourself, you will probably find it easier and faster to use ABSUnit's total replacement product, which is Full Mesh.
View detail
Good goods
I feel better when I grip the Brake. View detail
Banjo is hard to tighten, but
Stable braking force can be applied from the start of stepping on the rear brake to the maximum large step. Since the braking effect does not change with the amount of pressure, it is possible to assume the final braking force when stepping on the brake, even during strong breaking. View detail
Reliable Swage line
The length is slightly generous, but within the acceptable range.
We have used it for several other units in our home and it is our favorite Manufacturer.
View detail
สายเบรคสวยมากระยสายตรงตามที่ได้สั่งซื้อไปได้ตามระยะความยาวของสายที่ต้องการเหมาะกับการใช้งานกงรุ่นๆๆๆ View detail
Banjo adapter
Change from SWAGE-LINEHoseStraight AdaPig I'm happy with the angle and the extra room it gives me. View detail