Reviews
Cannot be installed due to wrong Bolt
Why didn't you check Bolt twice? I could not install it today. I didn't think it was wrong.
The bottom of the Bolt is supposed to be forward and the top inverted, but the Bolt enclosed for installation had the bottom forward and the Mirror side inverted.
View detail
SUZUKI Grip Heater
The product is defective. Suzuki service center says grip heater controller is bad Please send parts to Grip Heater control.About quality and texture View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
Try it Not recommended." It turned out that
GSX1300R HAYABUSA riders should take note.
It looks good and the quality is good.
My impressions of the installation and use at Tank.
Handlebar is now farther away than I expected.
It is a hazard to driving, to say the least.
Because it can also be leaned on during high speed Long
It was an easy ride, but
It is not usable in the city first.
It is quite dangerous.
For OEMOption of INew ModelGSX1300R HAYABUSA
Because it was Lineup.
I bought it because I believed in it.
Very disappointing.
I spent a lot of time and your Gold.
I can't believe the danger involved.
It was a flying purchase.
If you are going to buy, it is safer to buy Small.
View detail
Fits: SUZUKI falcon (esp. the peregrine falcon, Falco peregrinus), SUZUKI Boulevard 400, SUZUKI Gemma., SUZUKI SV650X ABS, SUZUKI SV650ABS, SUZUKI GSX-S1000F ABS, SUZUKI GSX-S1000ABS, SUZUKI falcon (esp. the peregrine falcon, Falco peregrinus), SUZUKI Boulevard 400, SUZUKI Gemma., SUZUKI SV650X ABS, SUZUKI SV650ABS, SUZUKI GSX-S1000F ABS, SUZUKI GSX-S1000ABS
Half of the back Tire is bare.
I bought it because it was listed as applicable to gsxs1000gt, but the front wheel is too much like a beak and the rear wheel only covers about half of the Tire. View detail
Dissatisfied with the shop's response
When the product arrived and started to assemble, Nut was missing 1pc.
I could not install it. I had to wait a long time for my order and the product was defective.
I emailed them about it but they never responded and Nut never arrived.
This is the worst company. I've never been treated like this before.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250 ABS, SUZUKI VSTROME 250 ABS, SUZUKI Vstrom 250, SUZUKI VSTROME 250 ABS, SUZUKI Vstrom 250
It's a solidly built, box-only product.
If it's a box Single Body, it's very good.
Key cylinder is no good.
You paid 60,000 in total.
Just two more Garbage in the Large Screen Box!
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
This is not a problem, though.
I'm sure those who buy this will be able to put a side case on it.
Install in a box.
You might not want to buy it because you have a problem with the key cylinder.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
Bolt break.
It is easy to break when the Bolt of Cylinder is tightened with the Torque specified in the Construction Manual.
It's a bad idea if you don't make it enough of a governor to tighten it up by hand.
Garbage is troubled because Garbage seems to increase more and more when replacing it.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
The quality is too bad, not to mention the performance.
When the key cylinder is installed, even if the nut is less than the specified torque, it is still possible to use it in a 3 piece operation. Quantity:2pc. Set folded.
Top case is not attached, so I should have one left over, but I had to buy another one.
If you're about to buy one, you'll regret it if you don't tighten it so loosely that you're worried about it.
Also, the attached key is bigger than the Main key.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
Bolt breakage
When the key cylinder arrived and I installed it and tried to tighten it with the specified torque, the bolt broke off Yes, sir! Quality is not good
I'd like to see it made a little better
View detail
headlamp
because of product picture on webside,i thought the cover would be complete, but it is not,so for next time insert a more comprehensible product photo.thank you wery much View detail
Doesn't fit with toolkit.
I didn't quite realize from the photo, but this rack fully replaces the stock grab bar. While this is not a huge deal, it does mean you replace chrome with a matte silver color. It also means you have to un-mount and re-mount the rear turn signals. The real disappointment, though, is that this rack makes the toolkit entirely inaccessible. Which makes the rack useless to me. It is also pretty small. If you don't care about these things, this rack seems fine. View detail
It is not warm.. It will not pass in winter.
I'm sorry, it is not warm. Part of the Grip heater (Not all circumference) , And the temperature does not rise too much. Warm your fingertips even if you set the maximum temperature (Keep warm) It does not reach the purpose of. By saying OEM, there was no discomfort in Grip feeling, but I felt that price and performance did not match.
Another Honda car is equipped with Honda OEM, but this one is very good. You can commute comfortably even in winter.
View detail
Fits: SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-S1000ABS, SUZUKI GSX-S1000F ABS, SUZUKI SV650X ABS, SUZUKI SV650ABS, SUZUKI BOULEVARD400, SUZUKI GEMMA
what is being treated by HOMUSEN (Joyfull O -- new) was torn -- a sake -- having purchased -- although -- HOMUSEN -- having bought it -- a thing -- the direction lasted long. I think that the influence by a wind was great since it was what does not ha
what is being treated by HOMUSEN (Joyfull O -- new) was torn -- a sake -- having purchased -- although -- HOMUSEN -- having bought it -- a thing -- the direction lasted long.
I think that the influence by a wind was great since it was what does not have a belt in a center.
(with the outdoors and no roof) The direction of outdoor parking recommends you a type with a belt in the middle.
View detail