Reviews
I should have put it on sooner.
I was worried about the price and whether I could install it by myself for about 2 years, but finally I bought it.
Spring couldn't hook me up in any way, and I was on Net. "Remove RubberDamper, apply Spring first, assemble, then put RubberDamper back on." It took about 30 minutes to complete the process.
This will make maintenance easier. I wish I had put it on sooner. (^o^)
View detail
Suzuki Hayabusa Gen 3 Alarm set
The alarm is very basic, you don't have a remote for it and instruction came only in Japanese. Maybe in the future Suzuki will come with more complex alarm systems... View detail
Fits: SUZUKI DL1000 V-STROM1050, SUZUKI DL1000 V-STROM1050XT, SUZUKI GSX-8S
I like the SEA BASS Logo.
Since we're here, let's go OEM.
The SEA BASS Logo is a nice touch.
However, we need to drill a hole in the back of the Back with a Drill, so we will need a Drill and a sleeper.
It seems that the location of the hole is different depending on the type of Motorcycle.
I like the way it looks, but it was a bit of a hassle.
I was worried that it would be difficult to see the speed or something if I put the back on, but it was perfectly Large and sturdy.
View detail
The change in footing is almost imperceptible, but
OEM design and quality can be maintained while lowering the Seat height.
I don't really feel any change in footing when I compare them because of the width of the Seat, but I do feel a difference in footing when I need to step on it.
If you are at all concerned about your footing, it wouldn't hurt to replace it.
View detail
Conformity!
It is surprisingly conspicuous? It looks good.
Chain adjustment is now easy.
The answer to the Title!
It goes on 72a, L2! Works properly and first.
I thought that some of you might have been confused because the webikeSite seems to indicate that only EJ11A is compatible with the product, so this is my meddlesome impression.
View detail
Installed on a Type 3 GSX1300R HAYABUSA to prevent inner thigh heat
Installed as a countermeasure against hot inner thighs coming in contact with the Frame when the foot is down while the vehicle is stopped.
Installation is easy with double-sided tape, but it is good with no signs of coming off.
I didn't want to put it on because I prefer the way it looks without it, but when I actually put it on, I found it was not as bad as I thought it would be.
The heat shielding effect has not yet been experienced, but is expected Large.
View detail
Functionality is adequate but price is high
I purchased this product because there was no other brand product that fit my Model 3 GSX1300R HAYABUSA.
The construction is simple and only requires removing a few Bolts and installing them. No special tools were required, and anyone could easily install it.
In addition to SEA BASSOEMTank Bag, SW-MOTECH's EVOTank Bag can also be attached.
I have no complaints about the construction or appearance, but the minus point is the high price for a simple construction.
View detail
Mounted on KSR80
I bought a KSR80 and enjoy riding it, but I felt inconvenienced by the lack of a helmet holder.
I was wondering if it would be stolen if I removed the Screw, but removing and attaching the Brake master prevents it, and I think it was attached in the best position for me.
The quality of the OEM Product is assured, but it would be even better if the key could be pulled out and locked without a key even when unlocked.
View detail
Good
I put it on CUB's Carrier.
So-so feel.
View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
Sufficient windproof effect.
It's easy on the body, especially at high speeds.
The logo on the GSX1300R HAYABUSA is also cool, and the transparent screen allows for good visibility, but I personally would have preferred a little color.
Also, because it's a little longer than OEM, it makes a rattling noise at 2500-3000 rpm …
I bought a Sponge Cushion, which is thinner than the Home center, and put it on the contact area between the Screen and the Cowl to solve the problem.
View detail
OEM Product is Great
I was confused between the cheap ones from a certain Net mail-order large (?) store and the OEMOP ones. I had a hard time deciding between the cheap ones from a certain Net mail order Large hand (?), but I decided to go with the OEMOP ones.
When I saw the actual product, I was glad that I chose OEM Product even though it was expensive.
It seems that the colors of Chinese products don't match well, but this was an OEM product.
Installation is also a breeze, all you need is your motorcycle key to replace the Tandem seat. (Lol)
When I installed it, there was a spot where it lightly touched the Seat Cowl, so I put a protection sheet on it to protect it.
View detail
It fits perfectly and eases the heat.
I bought the GSX1300R HAYABUSA because even though it is now in its third generation, the GSX1300R HAYABUSA is so hot in the summer months that I almost burn myself with Frame heat.
It doesn't completely block the heat, but it's far better than nothing.
I chose this product because it is sure to fit, but I personally feel that it is a bit half-hearted because it does not completely hide the Frame. I think this is a matter of preference.
View detail
Satisfied with the look and feel of PetitCustom
[How is it used?
This is Carbon style, but I installed it for custom feeling.
Was the one you received as per Image?
If you look at it carefully, it's obvious that it's a fake Carbon, but at a glance, it's a good enough Parenthesis.
Was the installation difficult?
Just use double-sided tape and stick it on, so it's easy.
How was your experience with it?
Function? It's more of a look than a function, so I'm happy with that.
It's Carbon wind, so the price is Reasonable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
There is none
View detail
It's handy to have, but...
The information was that it would be printed after the order was placed.
I was told that the delivery time would be 1 month to 1.5 months, but I received it within a few days after placing the order, probably due to the good timings of the order.
I think that it is convenient if I have it, but I hesitated to purchase it because the price is more than 20,000 yen.
View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
OEM was colored.
I found out when I bought it why it came with a Cover, it's perfect. [Color] The meter is clear, so if you park it in a place where it will be exposed to sunlight, the meter will probably be damaged, so you need to think about where you park it when you go touring. The fitment is perfect. The current GSX1300R HAYABUSA has a Screen with ScrewQuantity:It's only attached by 2pc, so it'll shake at high speed, and the Cowl is more solid on the Type 2. View detail
Fits: SUZUKI K50, SUZUKI ZZ, SUZUKI ADDRESS V50, SUZUKI CHOINORIII, SUZUKI CHOINORI SS, SUZUKI LETS, SUZUKI LETS4, SUZUKI LETS4G, SUZUKI LETS4Palette, SUZUKI LETS5, SUZUKI LETS5G, SUZUKI LETS II-Standard, SUZUKI LETS II-StandardG, SUZUKI Choinori, SUZUKI Choinori
To prevent direct sunlight
The parking lot of the company is covered for the purpose of preventing the damage of the painted surface by direct sunlight and the deterioration of Seat Cover because of Blue sky parking. the Waterproof effect is not so high, but it plays a sufficient role as a simple Body cover. View detail
For the heat.
I bought it to prevent the frame from getting hot when stopping or driving at low speeds. I haven't done any touring yet, so I'm not sure how effective it is at preventing heat, but the dress-up effect is pretty good. View detail
I'll take what I can get for what I can get.
I bought the SEA BASS Tailback because it was still available, and the Instruction Manual included the names of famous cars like the DR250, TS200R and TS50 HUSTLER.
Although the age is different, it is also perfect for our HUSTLER.
Because it is a small tailback, I have put a small thing such as a spare Plug. The durability is a mystery because it is soft, and I am still researching where and how to tie through the String for fixing the Back. It is full of letters of SEA BASS a little, but I am personally satisfied Large.
View detail
It was Exactly
Swish's Seat cover is a dedicated product, so it is naturally Exactly
Despite the new opening, there were some scuffs and scratches and the price was high.
One Minus Star
View detail
As expected
As expected of OEM, it fits perfectly!
Personally, I found the KATANAMark to be dull and didn't need that, but other than that, I'm happy!
View detail