Reviews
If you are tall, you can't go wrong buying it.
I had a pain in the hip joint area on long distance rides from the first day I rode with the Normal seat for about 1600 km.
The effect was as I expected, the pain I felt in the normal seat was eliminated, and in addition, the higher viewpoint made it more comfortable. I felt as if I was riding in a MOTARD.
View detail
It is a bit short, and is gold or yellow in color?
Design is good. As others have written, it is a bit short.
I started from the rear wheel and realized I messed up, but I was able to turn the Air Valve around and get the front and rear Quantities:Pair (for Left and Right) The "hang" is to try to match the "s" of the "hang".
Go over my corpse and try to finish it nicely….
View detail
We will tell you the point when it is just a little bit too small and put it on the wall.
As per others' Reviews, it is inevitably a bit short.
From the body color, I am confused between Red and Gold.
I would like to see an image that clearly shows the difference between the two colors in the product information.
When pasting, use theQuantity:Pair (for Left and Right) It is a good idea to determine the location of the Valve position as a starting point and to be aware that it will be a little short of the dimensions so that the target will be
View detail
It looks better now
It is an OEMOption product, so the quality is high.
It may seem somewhat expensive, but the improved appearance is a good thing.
However, I personally would have preferred to have no Logo in the car name.
View detail
Looks cool.
I think it went on well, but I'm worried it will peel off while driving. View detail
OEMLEDTurn signal
GSX-8S SEA BASSOEMLEDTurn signal
I thought about LED turn signals from other manufacturers, but I chose OEM because it was more reasonable with ICRelay.
Refreshingly more than meets the eye, as you would expect from an OEMOption.
The wiring of the Turn signalBody has been treated with a connector so that it can be installed without damaging the wiring.
Relay is under Tank, so I think it would be better to ask Shop, etc.
Of course, it is ICRelay, so it does not make any operating noise.
View detail
Winter is a necessity
If you assemble it according to the instruction manual, there is nothing wrong with it.
I think it would be better to use Towel to protect the handlebar from damage when shifting it.
View detail
Just for looks?
When I saw the product photo, I thought it was a Rubber quality product, but when I looked at it, it was a little thicker Sticker. The sticker is applied by spraying it with diluted neutral detergent, and there are no problems with air removal or positioning. View detail
very good
It is installed perfectly on the gsx-8s. The motorcycle itself was difficult to install, but after installation, it works well. It is very warm. Even if it is expensive, let's make it a must in winter. Let's leave it to the industrial park, so it was difficult for experts to install it. View detail
Center Stand
Center Stand is convenient to have
It requires hang to install by itself.
View detail
Suzuki tank pad
Item well received.well packed.very satisfied.my second purchase.many more to come.highky recommend.thank you webike.awsome job View detail
Pasting is easy.
The adhesive was strong and easy to apply.
Since the adhesive strength is reduced in cold weather, it is recommended to run lightly or warm up the tank with Idling before installation.
I don't know how durable it is yet, but the Guard range is Large size.
Since it is an OEMOption, it is a Recommendation.
View detail
Fits: SUZUKI Address 110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address 110, SUZUKI Address 110
Replace Handlebar Cover
I had been using a Handlebar Cover, but the poor operability, including the switches, was a drawback. On the way back to work, it is nighttime and there is a mountain pass on the way, so it is necessary to switch the light switch between high and low. This product is OEM and fits well.
The conclusion is that the cold protection is there. The more Speed is on it, the better it works. It looks big. I am worried about the rigidity of the Mirror, because it is attached only at the base of the Mirror.
View detail
good
I bought it 30% cheaper than I bought it directly from Suzuki, Korea, and the installation took two and a half hours and was quite difficult. However, it is very clean in appearance as an all-in-one and can be heated as soon as the engine starts with three temperature control steps. In sub-zero weather, a hot wire grip is essential for safety as well View detail
good
I bought it 30% cheaper than I bought it directly from Suzuki, Korea, and the installation took two and a half hours and was quite difficult. However, it is very clean in appearance as an all-in-one and can be heated as soon as the engine starts with three temperature control steps. In sub-zero weather, a hot wire grip is essential for safety as well View detail
good
It took two hours to install. It wasn't easy. However, heating grip is a must in the weather approaching zero degrees. You can buy and use it about 30% cheaper than buying it at Suzuki's official branch, and level 3 is very warm, so you don't have to worry about falling your fingers. View detail
It's something you don't have to ….
It's something I could do without, but it looks tighter.
I put it on when I took delivery of the Motorcycle, so I can't compare its effectiveness in preventing slipping compared to when I didn't put it on.
When asked if they are non-slip when worn, I can only say that I don't expect them to function that way….
on (for) our side (side) The "look as the most Large effect, so I think it is effective.
At the same time, I also added a Tank Pad, but this one could have been more or less….
View detail
It got easier to ride
[How is it used?
It has been over 10 years since the vehicle was purchased and the Seat has deteriorated over time.
How was your experience with it?
...The bend in the knee is just right.
I no longer have to worry about contact with the footpeg when I put both feet on the ground.
View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 650XT, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650
OEM Parts is still the way to go
The Torque wrench is a must. View detail
CoolDesign
To protect the Tank from Wound because it is the part where the Jacket and Pants hit.
It is required to be installed. ?? It is also cool that it has the name of the car model.
Pad is divided into 3 parts, so don't Gap when pasting.
We need to be careful.
View detail