Reviews
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
Loading Hook is now treated as an Option
If I was going to add a Hook as an Option, I would have preferred a Hook that matched the body color, etc., but I chose this OEM. I don't always use this Hook, so it's not bad for the fit and the Screw head with the blindfold Cap included. View detail
Tank will look calm.
Tank will be calm as shown in the photo.
The texture is usually good.
Since the mounting base is not included, positioning is quite difficult.
View detail
Fairly hard
I compared OEMSeat and StylishSeat for about 500 km each, and OEMSeat gave me much less buttock pain.
I personally can't recommend it to people who value Cushionability.
View detail
Windproof effect 0, only appearance
I'm sad to have nothing, but I'm not so sure if it's too big or too small… so when I'm not sure, I go with OEM.
I ran a little but did not feel any wind protection.
I bought it just for the looks of it, so it was factored in.
Base is included, so there is no need to worry about rainwater intrusion.
It is necessary to put Sponge on the Base as a preliminary step, so please do it in advance.
The procedure is
Remove Base
BoltQuantity of Headlight clamping:Remove 2pcs and put on Bracket (Bolt replacement)
Base new one.
Windshield on
It is
I'll give Design 2 stars because of the subtlety of the front view.
The design is subtle, but the quality and texture are good, so I'll give it 3 stars overall.
View detail
It looks cool, but what about windproofing?
It's just a look! The windproof effect is not so good.
It does not repel insects.
View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
Tools were required for installation. The product is fine and good, but...
The estimated installation time is 25 minutes, but that is with the tools available.
Need to do some work such as drilling holes with PowerDrill.
To avoid instability in the work, the Instruction Manual includes
Get the sleepers ready."
It also states.
The tank ring was easy to install.
The description of the tools etc. for the Others is
I would like to have it written down.
Tools that are rarely used.
The purchase was to be made.
Also,
I will not be able to make it to the Touring that was my goal.
I'll get the tools and sleepers ready in the next week or so.
I will install it slowly.
The feeling is that the product is not yet ready for use, so it is not yet ready for use.
"Four.
I would rate it as follows.
View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
The product itself is good. Insufficient explanation regarding installation.
There are some preparations to be made, such as PowerDrill and sleepers for installation. We had to purchase a PowerDrill and find sleepers separately, etc., and it took us over time to get there in time for our intended touring. The instruction manual clearly stated the necessary tools. I wish they would write this kind of thing in the manual. View detail
It's an OEMOption.
I've never seen a black single seat cowl before, so I don't know, but if you look at it under sunlight, it's distorted.
In my case, I saw two parts, one of my own and one of an acquaintance's, and the same spot was slightly distorted.
My acquaintance asked me if I could handle objections, and he was told "Spec. He was told "Spec.
The distortion is very slight, but it is still noticeable on black.
View detail
Not long enough…
I attached the overlapping part of the seal according to the dimensions in the Instruction Manual, but in the end it was about 1cm short.
You might have to stretch it a bit as you pull it off. 。
I think it's cool in its own way.
View detail
Neither good nor bad OEM
I bought this because I do a lot of maintenance and the Maintenance Stand was a pain in the ass.
As for the installation, it is difficult to pull the spring to put the Rubber Bush at the end as everyone wrote, so I bought Spring Remove KIJIMA:KIJIMA item number:302-2041 first.
Because the place where the Center Stand is installed is prepared beforehand in the body of the car, ignore the place of the Rubber Bush installation of the Instruction Manual and do the rest as it is.
Install the spring by pulling the spring with the Spring Remove. Even if you use this tool, you need to use full force.
Apply Grease that is not in Included Parts:to the CenterROD.
Finally, Grease up the Spring and the hooks and you are done.
Maintenance is now easier, but Side Stand is harder to get out.
Furthermore, when the extension which expands the ground area is attached to the Side Stand, it interferes with the Center Stand, so it becomes necessary to cut the extension.
View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
Dress-up effect?
Does it look a lot different at night and during the day? View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
I don't know if I should bother putting it on.
I bought it with the frame cover, but it is only a dress-up product, so it is safer to wait for the Real Carbon product to come out instead of PrintCarbon, although the fitting is perfect since it is OEM. View detail
For my daughter's GSXS.
I bought this to put three in a row on my Garage... my daughter will not use it at all! (Lol)
I watched a lot of videos and struggled to put it on... orz
If it were easier to use (even for non-powered women), it would have been rated higher... too bad.
View detail
For my daughter's GSXS.
Bought this to put 3 cars in the Garage.
I installed it while watching various installation videos......but it was very difficult to install the Cushion rubber at the end.
I installed it, but... I'm the only one who stops at Center Stand. (Lol)
Daughter and wife always use Side Stand as a hassle
┐ (´p.s.) backwards (shaking)
If only it were easier to install and use...too bad.
View detail
It's worth the price.
[How is it used?
The XJR1300C doesn't have a helmet holder, so I chose this product which is cheap and looks easy to install.
Was the one you received as per Image?
The product images were well posted and were as Image.
How was your experience with it?
The price is right. It does its job well, but the key body sticks out unexpectedly, and it's a bit of a pain.
It is difficult to use because the key does not come off when you turn it...
At least I hope I can pull the key out when I open the key.
[Points to note]
There are no special requirements, but it is not recommended to install the key hole pointing straight up.
There is a risk of rainwater entering the cylinder and causing the cylinder to stop turning.
How did it compare to other products?
The KIJIMA Universal is more troublesome to install because you have to make a bracket.
This is difficult to use, so I will switch to KIJIMA.
View detail
Fits: SUZUKI BANDIT1250, SUZUKI BANDIT1250, SUZUKI BANDIT1250F
Oh, thank God!
It's an old Motorcycle, but it helped me to understand the structure of OEM Parts and MotorcycleBody. View detail
Easy to install.
Because it is exclusive for Address 125, installation time was about 30 minutes and installation was easy. View detail
High quality
It is well built and sturdy. The paint is in good quality with a beautiful finish. It takes only 30 minutes to install the Address125 and it looks great. View detail
Fits: SUZUKI Address 110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address 110, SUZUKI Address 110
It is larger than I expected.
It's not as large as I thought it would be. However, because of its large size, it is very effective in preventing the wind from hitting your hands directly. View detail
For SEA BASS only
The design is simple but it prevents the smart key from being scratched. View detail