Reviews
I saw that it was out of print, so I suppressed it.
Manufacturer OEMOption Parts.
I bought it because it is out of print and I thought I would hold on to it.
Yeah, failure.
White on Gun meta as per image (over Paint or Seal) [Color] (Clear?) It was.
The one up in the product image looked Black.
In any case, Out for Mat silver bodywork.
It would have been better if it were black instead of the shiny gun meta.
Two bright, flashy colors that are not on the body of the car.
Parts that would look good on a Black SV from Gun meta.
I tried Silver as a trial, but the Fit feeling is not so good.
Paint was returned and sealed to the Stock shelf as a testFit only item.
View detail
Protection of OEMSeat + increased seating comfort
[How is it used?
Seat cover for SUZUKI/CHOINORI OEMSeat.
I was considering whether to buy a new seat or reupholster the tattered CHOINORI seat I had purchased when I found this on webike.
I bought it immediately because the Gold amount was low and I only had to cover the top.
Was the one you received as per Image?
The texture was better than I expected and the size was perfect for an OEM Product.
I chose black to match the OEM, but brown is also available, so you can easily change the seat color.
How was your experience with it?
Besides the seat protection and dress-up effect, I feel that the seating comfort has improved a little.
Originally, CHOINORI's Seat is soft, but by covering it with this, it feels as if another cushion is being laid on top.
[Points to note]
Nothing in particular, but it is only a Cover, so maybe one day it will tear and need to be replaced? It is just a Cover, so maybe it will tear and need to be replaced someday?
How did it compare to other products?
I can't think of any other product because of this kind of product in OEM Product.
View detail
ease of use
Very easy to handle. View detail
OK for minor falls
Large sturdy to the extent that it is knocked down when standing or parking.
RearBrake pedalBrake lever and clutch lever will bend if it is knocked over even with this attached.
It does not seem to be able to withstand a fall while driving.
View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT
Under Cowl fit for V-stroke
Since SV and Vist are the same Engine, I found out that it can be used for SV as well and purchased it. The instruction manual is easy to understand, and the product fits just right between the SV Engine and Radiator to the point that it seems to be an SV OEM Product. View detail
Parenthesis good in standard
At first, I thought about using a pad without a pad, and I also thought about a design I found in Jungle, but I decided on this one because of its quality and standard design. When I put it on, I found that the adhesion was weak at the curled part and it started to peel off, so I temporarily held it in place with tape. If I had cured it right after applying it, it might not have been so bad. View detail
zx-25r Brake Caliper brembo STYLEM installed
[How is it used?
Was the one you received as per Image?
Body is Black Logo is Silver Logo is Red is Parenthesis is good.
Was the installation difficult?
Installation is easy, and if you follow the Torque regulations, I don't think you'll have any problems. (Self-directed)
How was your experience with it?
Definitely better than Tokico products
[Included Parts:were they on?
Included Parts:Note that there are no details, etc.
[Was there anything that disappointed you?
Included Parts:
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Pasting tools need to be prepared separately
Since someone has already written about the details of the product, I would like to add to that.
The only content is decal.
You will need to prepare your own Squeegee and degreaser for the paste.
The pressure-sensitive adhesive, like Wrapping Fill, allows for temporary fastening and is very easy to work with.
Here! and once positioned, crimp it to the grizzly.
The protective film allows Squeegee to be applied without hesitation.
If you use masking tape or other means to manage the skimmer, I think you can divide and paste the et cetera with a good degree of accuracy.
View detail
It does not require processing. The lid is a bit ….
The USB power supply can be removed very easily if you don't feel the need to remove the front parts, which are the face of the motorcycle. If you don't feel that removing the front parts and drilling holes in the body is too much work, you can take out the USB power supply very easily.
It is not difficult if you have a set of tools used for maintenance. Drilling was done halfway using a plastic cutter, Nipper, and File.
Wiring is completed by simply joining the existing Connector, which is the quintessential OEMAttachment.
It is also helpful to be able to download the illustrated Instruction Manual.
Material for Waterproof:It has a rubber lid, but the fit is squishy and unreliable, and it hits a nearby screw when closed, so it's not great here.
Aside from the amount of work and quality, I wonder if the most appealing feature of the Large is the ability to take out the USB power supply without any wiring process.
For reference, it took about 2~3 hours to do the work by hand.
View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
There is a mistake in the instruction manual
As others have mentioned, the parts for the connection to the tank are not installed, and I have to drill a hole in the back with a drill and screw it in place myself. The hole position is less difficult because the hole is drilled with a jig, but the problem is that the instruction manual specifies a drill diameter of 8.5mm, which does not match the diameter of the hole in the jig. Note that 8.0 is actually just right.
Even though it says 11-15L, the luggage capacity is small, so don't expect too much.
View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT
Very good OEM parts, but...
good point
Can be attached to any machine equipped with a P511 Engine.
I installed it on my current model SV650.
Although it is called "Under Cowl", there is almost no cowl part at the bottom, so it does not interfere with oil changes and other operations.
After assembly, the unit can be detached simply by removing the four Bolts on the SIDE, without compromising serviceability.
The design of the V-Engine is very good, but it has a look that compensates for the scuffiness of the underbody, which is common in V-Engines.
Cheaper than a bad Under Cowl*, less than 23,000 yen at the time of my purchase.
All of the installation brackets and instruction manuals are in quantity.:It is available in Set, and there is no need to worry when installing it.
OEM products are made with fitting in mind, so you don't have to worry about fitting.
A bad point
The product is originally designed for DL1000 V-STROM650, so it has the DL1000 V-STROM Logo on it.
I'm thinking of making a Sticker and posting it above.
From a distance or in a photo, it looks good, but at close range, there is a surprisingly large gap in the cowl, which makes it look scanty.
Even if it is a Cowl, some stores may charge a Cowl-equipped car labor fee for the work.
Instruction Manual is in English Version for some reason. (Well, if you know anything about maintenance or DIY, you don't need to read the English version to understand the contents...)
Some Bolts need to be removed with T30 when installing, so preparation of Socket, etc. is necessary.
I wrote that there is no cowl at the bottom in a good point, but it is not suitable for Circuit Running because there is no cowl at the bottom.
*Under Cowl in Circuit would have had an Oil-receiving role, but in this Cowl...
I have written a fair amount about the bad points,
Personally, I give this product almost a perfect score.
If I had to say, I would have said Cowl without Logo...
View detail
Vstrom under cowl
The product is packed well and shipped on time. There are no damage. The item is original and it is plug and play on my sv650 for added protection. Complete accessories View detail
Because it is a genuine product, it fits well and looks neat.
I looked into other tank pads and eventually decided on Suzuki's genuine pads. There is no particular reason, I just heard that it is easy to attach. This is a photo attached after delivery. Because it was the right size, even someone like me was able to attach it easily. I haven't driven it yet, but I'm very satisfied. View detail
poor in cost performance
Tank Pad was attached before it was scratched because of the large Tank surface.
I think it is well made and thick because it is OEM.
I don't think it would detract from the design of the vehicle.
It is difficult to put it on straight because of its wide surface.
Be careful not to stretch slowly from the edges, otherwise air can easily enter.
View detail
Even though it is made overseas, it is an OEMOP, so there is no need to worry about quality
There are cheaper ones with the same design available at a certain Site, but I chose this one because it is made in the same foreign country but OEMOP, so I did not have to worry about the quality. I am satisfied with the result. However, since I have had trouble getting the center out of any Tank Pad, I wish this one, which is an OEMOP, at least had a guide for attaching it. View detail
Tank Pad
Satisfactory, but not great value for money. View detail
Fits: SUZUKI GSX-R125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN200, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Fashion starts at your feet
Rim sticker will be attached!
This is not practicality, but a complete dress-up (laugh).
[Before pasting to …
Select the color of the MotorcycleRim sticker.
When I thought about what color Rim sticker to use, here is what I came up with 。
。 If the color next to the Motorcycle color is the Rim Sticker color, it will give a coherent and soft impression.
*Similar colors are the use of two/three adjacent colors in a hue ring.
●●* Use complementary color schemes to create Impact.
If you use a color that is opposite to the Motorcycle color, Contrast will be stronger and the impression will be more Impactful.
*Complementary colors are the opposite colors of the hue ring.
●*Using a three-color scheme, the product is both colorful and impactful. 。 If you use Motorcycle's colors and two colors that form equilateral triangles, you can create an Impact combination with three colors.
* A three-color scheme is a three-color version of a captive color scheme.
White and black go with everything.
All colors are white when lightness is increased and black when lightness is decreased. 。 In other words, unsaturated White and Black go with any color.
Same color as the player you admire 。 My lucky color etc.
→As for the color, since the Wheel is Black, I chose Red based on the principle of a three-color scheme.
(2) Check the Rim width.
Measure the width of your Motorcycle Rim and choose the largest size that can be stretched to that width. If the width is thicker, the impression of the area is stronger, so it does not bother you. Is distortion bothering you only at first? It depends on your personality, but the distortion of Rim sticker will bother you only for a while after you put it on. 。 It will not be a concern soon.
When a narrow rim sticker is used, it becomes a double circle with the Wheel outline. 。 This causes noticeable distortion of Sticker.
MotorcycleRim sticker tensioning instructions
[WATERING] The way is Commendation,
● Separate 1 pc at a time. The goods are thus Quantity:Several pieces on a 1 pc. mount. 。 This is then separated by 1 pc so that Sticker is unaware of it. 。 This way, 1 pc is easy to handle and easy to put up. 。 No damage to other Stickers during application 。 It is tedious, but there is no way to put them up neatly without putting them up one at a time.
↓
●Wash the Wheel to beautify. Wash and degrease the wheel, as residual oil will make it easier to peel off.
↓
● Dilute kitchen detergent and place in 100 Spray.
↓
The water is applied to the rim. After spraying soapy water, place the Sticker on the Rim 。 While wet with soapy water, fine adjustment is possible, so position it and once it is fixed, wipe the top with Towel or similar to remove water and fix it in place. 。
[Hang of the tensioning method].
Float the front and rear wheels…If you don't float the Wheel and put it up, it will be troublesome! It is easy to put up the wheel by floating the wheel with Center Stand or Motorcycle Stand. 。 If the rear wheel cannot be lifted, move the Motorcycle a little at a time, or turn the Wheel by tilting it toward the Side Stand. 。 Even a simple STAND is useful enough for ChainMaintenance, etc. 。 It is convenient to have one.
good point
● It will look really cool!
The durability of the parts can be expected since they are SEA BASSOEMOption Parts.
Easy to apply as it comes with a backing paper.
important point
Water tension is less likely to fail.
Degreasing is a must.
Do not do it all at once, but check the position of the seal and slowly remove air bubbles between the seal and the car body.
Of course, the Shop will do it for you, and there may be fewer failures (some Shops are not good at this). (Some shops seem to be bad at it.) However, it is possible.
You can think of your own color and put it on by yourself… It will also increase your love for your car.
View detail
OEM so it can be pontooned.
In case of GSX1300R HAYABUSA, I think WhiteCoupler and BlueCoupler in RearSeat are free, so it is OK if you connect this, and it is a kind of easy handling. I think I can handle Cable's handling in roughly 30 minutes. I have no particular complaints about the operation, and I think it is a good cosmetic product.
I think the Wiring required is limited, so with a little knowledge (UniversalWaterproofCoupler and a specific WiringLine) I think it is something that can be used universally.
View detail
As expected
The Screen of Standard Equipment was too cold, so I was looking for a Large Visor and found the High Screen on the SEA BASS website, so I bought it.
I did a test run with it at the top and it was so effective that it fogged up the inside of the Helmet.
I tried it in this position for the time being because the inside of the Helmet was ventilated in a good way when I put it at the bottom.
The effect is that just 8 cm higher is a LARGE amount.
Height 180 Weight 86 kg
FirmlyType.
View detail
One Tank Bag can be used for many different motorcycles with SEA BASS
I have several SEA BASS Motorcycles and can use one Tank Bag. View detail