Reviews
Parenthesis good in standard
At first, I thought about using a pad without a pad, and I also thought about a design I found in Jungle, but I decided on this one because of its quality and standard design. When I put it on, I found that the adhesion was weak at the curled part and it started to peel off, so I temporarily held it in place with tape. If I had cured it right after applying it, it might not have been so bad. View detail
Tank Pad
Satisfactory, but not great value for money. View detail
Pasting is easy.
The adhesive was strong and easy to apply.
Since the adhesive strength is reduced in cold weather, it is recommended to run lightly or warm up the tank with Idling before installation.
I don't know how durable it is yet, but the Guard range is Large size.
Since it is an OEMOption, it is a Recommendation.
View detail
It's something you don't have to ….
It's something I could do without, but it looks tighter.
I put it on when I took delivery of the Motorcycle, so I can't compare its effectiveness in preventing slipping compared to when I didn't put it on.
When asked if they are non-slip when worn, I can only say that I don't expect them to function that way….
on (for) our side (side) The "look as the most Large effect, so I think it is effective.
At the same time, I also added a Tank Pad, but this one could have been more or less….
View detail
Tank Protection
Film seems to be thick and protective.
The tip of the Seat is OK if you press it against the R of the Tank while using a hot gun.
Finish by stretching with a spatula in a radial pattern so that there are no air or detergent residues.
The film may look white immediately after pasting, but after one night, it settles down and becomes transparent.
View detail
The texture is good
The texture and feel are OEM, matching that of Cowl. The Silicon one made by another company would be a safer choice for those who drive on circuits as well. The installation was done by Red Baron, but the factory manager told me that the installation was very difficult and that I should rest for 24 hours after the installation. Overall, I give it 4 stars. View detail
Good shape!
Masking tape was used to come to the center
Degreasing of the sticking area was also performed.
It's been two months and no peeling at all.
Texture is very good
A little expensive.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
OEM Product for Peace of Mind
The product is an OEM product, so it fits and works well, but it is not perfect. View detail
easy to install
Center from top to bottomQuantity:1pc. so there are no gaps and it firmly protects the Tank from scratches. Pasting is also easy.:1 pc. thing, so it's easy. View detail
Scratch prevention measures from Zipper
I've already got some minor scratches on the Tank from the Bracket on the garment.
I purchased this as a measure to prevent further scarring.
We are satisfied with both area and design.
View detail
Design, texture, and functionality are all inadequate.
It has Logo of GSX1300R HAYABUSA, so that is the only reason I bought it, but when I put it on, I feel a little Vinyl feeling, but the texture is good in its own way. I tried running with it face down, but it also reduces the rubbing between the tank and clothes. View detail
As expected
As expected of OEM, it fits perfectly!
Personally, I found the KATANAMark to be dull and didn't need that, but other than that, I'm happy!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
I was able to paste it beautifully.
I was nervous to put it up, but it was Exactly. View detail
To prevent damage to the tank
It was installed in conjunction with the SIDEProtectionSticker
The Jacket's Bracketetc. also serves as a dress-up for the vulnerable Tank It is
SIDE STAY is the same, but since it's an OEM Option, it's not a good cosmetic option & hELLIP;
It's not comparable to Universal Product, but it's another thousand dollars cheaper I think it's a good idea
[Was there anything that disappointed you?
None
Do you have any wishes or improvements you would like to make for the Manufacturer?
I wanted to set up Fuel Cap Protection as well
[Do you have any products to compare it to?
None
What made you decide to buy?
To prevent scratches
How was your experience with it?
The Real Carbon Parts are matte, but this one is matte It's not too dissimilar to the original Option
Was the installation difficult?
【Please tell me the installation point and hang】
This is unknown because it was installed at the shop where it was purchased
[Was the Instruction Manual easy to understand?
It doesn't seem to be included as it was not given to me by Shop
[Included Parts:were they on?
None
[Others]
For some reason, it is not set in Japan, but in the overseas Option, the Fuel Cap Protection is also available
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Manufacturer option Tank Pad
This part is also a good place to start
Zipper on the jacket to prevent TankWound
I put it up
Previously, Motorcycles used Universal Product's Tank Pad to
It is not suitable for Tank shape, and the position of the paste is changed many times
I had a history of checking and installing them
Could it be age-related deterioration, maybe three years?
It's a bit pricey, based on my experience with the surface getting boggy
I bought the Manufacturer specific Option
It's made to fit the Tank's Line
It's a good point that it's easy to decide where to stick it
It's not easy to fit and peel off even after it's attached
There's nothing to lose, sir
Tank Pad is a lot of things, but
If you choose a build that fits the tank shape
You may want to select the Manufacturer option
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
It's good for Upright positives
I didn't like the position, so I reattached it twice, but it's still perfect! I'm sticking around 。 The quintessential OEMQuality
The vertical dimension was not enough, so I extended it with Clear Seal It is
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Things are reliable
After attaching it to the tank, it is bent and the position is not good, but it was reattached twice for convenience, but now But it's sticking out beautifully 。 This is an OEM product with excellent quality for an expensive price! 。
The reason I re-stretched it is because the vertical Size is short 。 It's good for Upright Position people
View detail