Reviews
Fits: SUZUKI GSX-R125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN200, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Fashion starts at your feet
Rim sticker will be attached!
This is not practicality, but a complete dress-up (laugh).
[Before pasting to …
Select the color of the MotorcycleRim sticker.
When I thought about what color Rim sticker to use, here is what I came up with 。
。 If the color next to the Motorcycle color is the Rim Sticker color, it will give a coherent and soft impression.
*Similar colors are the use of two/three adjacent colors in a hue ring.
●●* Use complementary color schemes to create Impact.
If you use a color that is opposite to the Motorcycle color, Contrast will be stronger and the impression will be more Impactful.
*Complementary colors are the opposite colors of the hue ring.
●*Using a three-color scheme, the product is both colorful and impactful. 。 If you use Motorcycle's colors and two colors that form equilateral triangles, you can create an Impact combination with three colors.
* A three-color scheme is a three-color version of a captive color scheme.
White and black go with everything.
All colors are white when lightness is increased and black when lightness is decreased. 。 In other words, unsaturated White and Black go with any color.
Same color as the player you admire 。 My lucky color etc.
→As for the color, since the Wheel is Black, I chose Red based on the principle of a three-color scheme.
(2) Check the Rim width.
Measure the width of your Motorcycle Rim and choose the largest size that can be stretched to that width. If the width is thicker, the impression of the area is stronger, so it does not bother you. Is distortion bothering you only at first? It depends on your personality, but the distortion of Rim sticker will bother you only for a while after you put it on. 。 It will not be a concern soon.
When a narrow rim sticker is used, it becomes a double circle with the Wheel outline. 。 This causes noticeable distortion of Sticker.
MotorcycleRim sticker tensioning instructions
[WATERING] The way is Commendation,
● Separate 1 pc at a time. The goods are thus Quantity:Several pieces on a 1 pc. mount. 。 This is then separated by 1 pc so that Sticker is unaware of it. 。 This way, 1 pc is easy to handle and easy to put up. 。 No damage to other Stickers during application 。 It is tedious, but there is no way to put them up neatly without putting them up one at a time.
↓
●Wash the Wheel to beautify. Wash and degrease the wheel, as residual oil will make it easier to peel off.
↓
● Dilute kitchen detergent and place in 100 Spray.
↓
The water is applied to the rim. After spraying soapy water, place the Sticker on the Rim 。 While wet with soapy water, fine adjustment is possible, so position it and once it is fixed, wipe the top with Towel or similar to remove water and fix it in place. 。
[Hang of the tensioning method].
Float the front and rear wheels…If you don't float the Wheel and put it up, it will be troublesome! It is easy to put up the wheel by floating the wheel with Center Stand or Motorcycle Stand. 。 If the rear wheel cannot be lifted, move the Motorcycle a little at a time, or turn the Wheel by tilting it toward the Side Stand. 。 Even a simple STAND is useful enough for ChainMaintenance, etc. 。 It is convenient to have one.
good point
● It will look really cool!
The durability of the parts can be expected since they are SEA BASSOEMOption Parts.
Easy to apply as it comes with a backing paper.
important point
Water tension is less likely to fail.
Degreasing is a must.
Do not do it all at once, but check the position of the seal and slowly remove air bubbles between the seal and the car body.
Of course, the Shop will do it for you, and there may be fewer failures (some Shops are not good at this). (Some shops seem to be bad at it.) However, it is possible.
You can think of your own color and put it on by yourself… It will also increase your love for your car.
View detail
Fits: SUZUKI GSX-R125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN200, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Buy Merchandise
I think it looks different and better looking. View detail
Top quality side panel enhancement
Very nice product. It make the bike look sporty. Really good quality at a good price. Shipping was fast and value for money. View detail
SEA BASSSIDEProtectionSticker
It is good for Carbon design. View detail
It goes well with the Black body.
It was installed in the used car of KATANA which I bought jointly with my brother. red shines well in the body of Black. It is good looking! View detail
Quality and Price of OEM Products
I bought this product because I expected it to look good and have A little non-slip effect. Normally, I would install a stomping grip, but this is not a stomping grip for the car and it is not on the line up. I think the impression of the impact is good. View detail
Accent and ImpactLarge with dedicated Decal
RimDecal Kit for New Model Katana
Inside and Outside Quantity:Set
[Was there anything that disappointed you?
Quantity:1 Setfor 1 Wheel(Quantity:1 Set for 1 Vehicle is Quantity:2 sets are required), so you need to use Quantity:2 sets required
Do you have any wishes or improvements you would like to make for the Manufacturer?
I want you to set up Overseas Option as well
[Do you have any products to compare it to?
None
What made you decide to buy?
KATANA's Logo
How was your experience with it?
There is quite an Impact on the Wheel compared to the NORMAL
Was the installation difficult?
【Please tell me the installation point and hang】
I had it installed at the shop where I bought it, but they had a lot of trouble It is necessary to align the edges of the inside and the outside and stick them together
[Was the Instruction Manual easy to understand?
It doesn't seem to be included as it was not given to me by Shop
[Included Parts:were they on?
None
[Others]
Like ProtectionSticker, the OEM Decal Kit for Body is available overseas There are two types of
THE CUT 990D0-07L02-RED
THE EDGE 990D0-07L03-RED
View detail
To prevent damage to the body
New ModelKATANAExclusive Design It is a SIDEProtectionSticker, installed together with Tank Pad
KATANA's Tank has an unexpectedly massive shape for its capacity In terms of design, the knee grip area is thin and feels easier to kneel in
That's why it's also a vulnerable area
[Was there anything that disappointed you?
None
Do you have any wishes or improvements you would like to make for the Manufacturer?
I wish you had set up Fuel Cap Protection as well
[Do you have any products to compare it to?
None
What made you decide to buy?
To prevent scratches
How was your experience with it?
The Option of Real Carbon will be matte, but the Stickers are for Seal It has a glossy, shiny finish
It is not uncomfortable with the exclusive Option, but it is not uncomfortable
Was the installation difficult?
【Please tell me the installation point and hang】
This is unknown because it was installed at the shop where it was purchased
[Was the Instruction Manual easy to understand?
It doesn't seem to be included as it was not given to me by Shop
[Included Parts:were they on?
None
[Others]
For some reason, it is not set in Japan, but in the overseas Option, the Fuel Cap Protection is also available
View detail