Reviews
Knuckle guards fitted to Bandit GSF1250SA
Thank You Webike Japan! After much internet searching I ordered these V-Strom hand guards on 5th Feb. Delivered on 8th Feb. Fitted on 9th Feb. Very easy fitting and all parts included. The hand guards look like OEM Suzuki Bandit parts. Now I'm waiting for better weather so I can see how effective they will be. Thank you again Webike Japan! Joe View detail
Essential for adventure motorcycles, universal and can be installed by any manufacturer.
This product is all about the high level of universality that does not even require a manufacturer, and the high cost of OEM parts.
It was easy to install since the only fixing method was to pinch the grip end and screw the lever base.
Although many Adventure vehicles are not equipped with a grip heater at the time of purchase, it is useful to some extent for keeping out the cold during the winter, and it is also effective for keeping out the rain.
View detail
Good, thanks webike
It is written in Korean for Korean reference. I was able to get a genuine product that was expensive in Korea at a cheaper price. After ordering, it took about 8 days to receive the item via EMS. The packaging is also neatly sent without worrying about damage. After that, it seems that you will find the items you need here first. thank you. It is written in Korean to refer to Koreans. I was able to obtain expensive genuine products at a cheaper price in Korea. It took about 8 days from order to receipt by EMS. The packaging is also sent neatly without worrying about damage. I think you'll find things you need here first. Thank you. translated by Google Translator View detail
Fits: SUZUKI Universal, SUZUKI Universal
Not a good finish on the inside
I bought a new Handlebar Cover because my old one was torn, so I bought a new one Manufacturer's OEM (I'm on a SEA BASS scooter) so it fits perfectly I chose it because I thought it would fit, but the inside finish is so bad that it rubbed against a piece of fabric when I rode with my bare hands I stopped using it because my hands hurt and it was difficult to operate the driving controls It's a shame View detail
DL1000 handle bow guard
Lightweight material. Effectively filter the wind resistance caused by high speed driving. With a simple tool to complete the installation. View detail
The lower side is a bit more
With other people 's impressions "Manual is hard to understand" There was something, but since it was in the original illustration attached to the good parts without removing it, I first felt confused, too. Although it could be mounted without problems, about 2 points.
?Included Parts : of "Washer" Although the number of pieces was suitable, one type was Soft Material : As you can see in the illustration by Rubber, it will be crushed by Bolt, so I added it from my inventory. (Was there another way of using it?) ? On the Design, I think that the wind protection effect has gotten more Large if the lower part of the Cover is overhanging a little more loud.
Either way it was a wonderful thing of OEM, and overall I was happy that Cool and Exactly stayed on me.
View detail
OEM sense of security
With no esoteric work and work progresses to Smooth, as expected, OEMOption.
Design is not as good as Ya Ya, but there is no problem, it is lonely unless it is attached.
I also write other people, but I think that it is even better if you can purchase one by one.
View detail
Excellent appearance. NicePrice
If you are on a V-strike, you can definitely say that the standard product
Purchase at this time if the wind hitting the hand can be reduced
The wind that actually hits the hand actually decreases
3 SeasonGloves Level which can endure even outside air at around 5 degrees
Installation is simple, but the Instruction Manual has only a minimal explanation for the mechanic
Dimensions of parts used and Quantity : Pair (for Left and Right) , Removable method of OEM Parts Number is necessary confirmation
If you look from an authentic OffLoader it may not be reliable but if you are Touring Main
Features, both appearance and price are preeminent
View detail
I am satisfied with the atmosphere that is like Cospa and Adventure!
AdventureMotorcycle think that Knuckle guard is going well with you, OEM Product, Other Company Product (TOURATECH) Although it was coloring, the Other Company Product was nearly three times the price of OEM Product and Fitting was worried, so I made it to OEM Product firmly.
Regarding the installation, it was difficult to extract Handlebar Weight, and the rest was easy.
Handlebar Weight was desperately resisting as Rubber in the Handlebar would not be pulled out with a slight deformation.
If you spray water or CRC, thinking that aftertreatment is Large strange, loosing Bolt holding Handlebar Weight as much as possible, removing it while shocking or shaking Bolt in the direction of extraction with Handlebar Weight it is complete.
Well, since I think that there is nothing I can never leave, I just need to persevere with perseverance. (^ ^ ゞ
As a feeling of use, wind blow to the hand is reduced as a matter of course, and even in winter, a bit of finger sharpness is alleviated ,,,.
I feel that the atmosphere as AdventureMotorcycle goes up a lot better than anything, so that is the best.
Off-road is a flashy Knuckle guard, but Adventure is GS and something sober Black Knuckle
It is a Guard, and I think whether it is a standard if it is called a classic one.
Also, COSPA is good!
I do not think I will try to standing, but even if I should stand up, SlipDown, because it is about 5,000 yen it is also friendly to Wallet.
It will be costly with other parts if it is coca, but ,,,. (^_^;)
Personally there is no point of disappointment.
Given the price, the atmosphere after installation, I think Design, texture is enough.
Strongly pointed to future improvements, it is best if you can only buy one or only a few Parts, considering After.
After that, if design further improves, people who purchase the Other Company Product may no longer exist.
No, really, I'm satisfied.. (^o^) /
View detail
It is not warm.. It will not pass in winter.
I'm sorry, it is not warm. Part of the Grip heater (Not all circumference) , And the temperature does not rise too much. Warm your fingertips even if you set the maximum temperature (Keep warm) It does not reach the purpose of. By saying OEM, there was no discomfort in Grip feeling, but I felt that price and performance did not match.
Another Honda car is equipped with Honda OEM, but this one is very good. You can commute comfortably even in winter.
View detail
Fits: SUZUKI Universal, SUZUKI Universal
Since it is the original manufacturer's product with which the Address for commuting was equipped since it was getting cold, attachment is worried [ what becomes and ] when it gets wet with an apt free, and rain. [ from which it is warm and a
Since it is the
original manufacturer's product with which the Address for commuting was equipped since it was getting cold, attachment is worried [ what becomes and ] when it gets wet with an apt
free, and rain. [ from which it is warm and a cold day does not become pain, either ]
View detail
Fits: SUZUKI Universal, SUZUKI Universal
[ [or / there were 2011 /] ] If it is used empty-handed, he will have a feeling that air infiltration is entering for a while from the portion fixed to a handle, but it is not worrisome if it uses together with a glove. There is also waterproofness, a
[ [or / there were 2011 /] ] If it is used empty-handed, he will have a feeling that air infiltration is entering for a while from the portion fixed to a handle, but it is not worrisome if it uses together with a glove.
There is also waterproofness, and since inside will become all wet if it does not rain [ of a heavy rain ], it does not become precocious.
View detail
I had you attach at the time of new car purchase. Since it says that it is pure, a settlement is also good touch. Although surely a grip becomes thick, it is the touch which may be easy to grasp individually. Although it was an important heat
I had you attach at the time of new car purchase.
Since it says that it is pure, a settlement is also good touch.
Although surely a grip becomes thick, it is the touch which may be easy to grasp individually.
Although it was an important heat function, and used for the trial, having carried out handle cover combined use, it is like a kotatsu and could be satisfied enough.
View detail
Since it does not get cold yet, it is not a perfect report, but it is warm from a palm to a fingertip, and the pain of the fingertip of a winter season will be eased. Since the knuckle guard also attaches, it is the more Moors, the better victory.
Since it does not get cold yet, it is not a perfect report, but it is warm from a palm to a fingertip, and the pain of the fingertip of a winter season will be eased.
Since the knuckle guard also attaches, it is the more Moors, the better victory.
Temperature can be adjusted with five steps of switches.
If the ignition ON has not required the engine, either, the switch of a heater is turned on and there are likely to be no worries after a battery.
sense-of-incongruity touch measure will get used immediately a little at first, since a grip becomes quite thick compared with normal.
It is hard to slide on the way of a normal grip individually, and although he likes, ? touch carries out a little heater grip that it is easy to slide.
It is better to purchase exactly, after checking a conformity vehicle type since the parts number is divided for every vehicle type due to the attachment stay ? although basic switches have several kinds of same things.
Although the price is high, since a heater consumes electric power, it is easy to have a feeling of concern of being pure.
Evaluation did not get cold yet, but since it was not a perfect report, it was dared to set it to 4 but, and I think that it is evaluation of 5 rightly.
View detail
Fits: SUZUKI Sky Wave 400 Type S, SUZUKI sky wave 250 type s basic, SUZUKI Sky Wave 250 Type M, SUZUKI Sky Wave 250 Type S
The picture of Ho contributed was given to reference at the bandit. What was added to its purchase was two long bolts of 6Mx200mm. (Bar end also equips with the thing of a bandit as it is) In order to avoid interference with a brake lever in the c
The picture of Ho contributed was given to reference at the bandit.
What was added to its purchase was two long bolts of 6Mx200mm.
(Bar end also equips with the thing of a bandit as it is) In order to avoid interference with a brake lever in the case of wearing, the stay part by the side of a visor was deleted by the cutter, and was made thin about 2 mm.
It is bolt-on [ entire ] except it.
Although the method of diverting V Strome's hand guard was introduced also at the foreign site, it could not obtain by termination of manufacture, but had given up.
As a result, the way of SUKABU appropriation had a high grade feeling, and was good.
Even if it sees from a front face, it is comfortable, and I feel that the dignity as a tourer came out.
Although interfered in a tank or a screen for a while, a handle lock is also satisfactorily made into a run, and it is a grade using mind at the time of vehicle warehousing.
View detail