Reviews
Very solid build
About quality and texture : knuckle guard is sturdy black plastic About the feeling of use: i feel solid . This is genuine suzuki parts but made in india Products to buy together: nothing just buy 1 set Difficulty of installation, quite tricky because manual is japanese Cost performance and comparison with other products, pay premium for genuine suzuki parts About shipping and packaging : very well packaged Any concerns, cautions, or advice when purchasing . It fits gixxer 250 perfectly View detail
Winter is a necessity
If you assemble it according to the instruction manual, there is nothing wrong with it.
I think it would be better to use Towel to protect the handlebar from damage when shifting it.
View detail
very good
It is installed perfectly on the gsx-8s. The motorcycle itself was difficult to install, but after installation, it works well. It is very warm. Even if it is expensive, let's make it a must in winter. Let's leave it to the industrial park, so it was difficult for experts to install it. View detail
good
I bought it 30% cheaper than I bought it directly from Suzuki, Korea, and the installation took two and a half hours and was quite difficult. However, it is very clean in appearance as an all-in-one and can be heated as soon as the engine starts with three temperature control steps. In sub-zero weather, a hot wire grip is essential for safety as well View detail
good
I bought it 30% cheaper than I bought it directly from Suzuki, Korea, and the installation took two and a half hours and was quite difficult. However, it is very clean in appearance as an all-in-one and can be heated as soon as the engine starts with three temperature control steps. In sub-zero weather, a hot wire grip is essential for safety as well View detail
good
It took two hours to install. It wasn't easy. However, heating grip is a must in the weather approaching zero degrees. You can buy and use it about 30% cheaper than buying it at Suzuki's official branch, and level 3 is very warm, so you don't have to worry about falling your fingers. View detail
Fits: SUZUKI V-strom 1050, SUZUKI V-Strom 1050XT, SUZUKI V-strom 1050, SUZUKI V-Strom 1050XT
Perfect installation
After receiving it, it perfectly matches the DL1050XT, the effect is very good, the installation is simple, the connectors are clear and clear, and the price is right. Thanks to webike, we, niche riders, can ride with confidence and boldly. We can quickly find any accessories. Thank you webike ------------------------------------------------ ---------- After receiving, the perfect matching DL1050XT, the effect is very good, the installation is simple, the connection is clear, the price is appropriate, thank you webike, so that these niche riders can rest assured that the bikes are bold. Thank you webike Powered by Google Translator View detail
I installed it myself.
Large sturdy if you follow the Instruction Manual, although you do need to hang it when inserting the Grip. It is warm. View detail
I'm glad I put it on.
I installed it myself, but it is safe to ask a reliable Motorcycle shop to do so. View detail
Finally, SEA BASS, too.
We have been using Honda's Sports GripHeater as a diversion, but this vehicle is an electronic Throttle...
Diversion is not allowed. However, SEA BASS has also come up with a good-looking Grip heater.
I ordered it in June and it was delivered in November...it's an unavoidable situation. Well, I am glad that it came before it got really cold. (If it gets really cold, I won't be able to ride much in the first place.......
Installation is easy as long as you follow the instructions in the thick manual (which comes with translations in about 7 languages (please type here)).
The Switch is in my hand and I can operate it without taking my hand off the Grip, and the Touch on the Switch is easier to understand than the one on the Honda.
The thickness is almost the same as NORMAL and the material has a good grippy feel. (Honda's material is thinner and has a slightly lower grip.)
I think I made a good purchase. The price is a little high....
The last thing you want to do is to have a Large! That is what we are going to test.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Mirror cover
Carbon Style Mirror cover.
It's just Carbon, but it looks good and I like it.
View detail
Fits: SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM
Just fit with Small processing
I wasn't sure if it would work for the BT1100, but it was inexpensive so I Ordered it.
It cannot be installed without modification, but it can be installed with Small modification. The brake side is made by using Nisshin's MASTER separate body MASTER, and the brake side is made by cutting the interfering part and melting the cut resin. The effect is that at speeds of 50 km/h or more, the fists are not exposed to any driving wind. 3SeasonGlove can also be used in winter.
Furthermore, when used in combination with SECDEM's Fairing, the area around the knuckle cover attachment point is covered, further increasing the windproof effect.
View detail
Hand/knuckle guards.
These are brilliant!!! If you need hand/knuckle guards for a gsf1250sa then these V-Strom hand guards are a perfect fit! Took less then 30 mins to fit and all fittings included! Just remember to take an allen key with you on your first ride out so you can adjust them for maximum effect! Brilliant!! Webike is my No1 go-to supplier now! Thank you, Webike! View detail
Knuckle guards fitted to Bandit GSF1250SA
Thank You Webike Japan! After much internet searching I ordered these V-Strom hand guards on 5th Feb. Delivered on 8th Feb. Fitted on 9th Feb. Very easy fitting and all parts included. The hand guards look like OEM Suzuki Bandit parts. Now I'm waiting for better weather so I can see how effective they will be. Thank you again Webike Japan! Joe View detail
Essential for adventure motorcycles, universal and can be installed by any manufacturer.
This product is all about the high level of universality that does not even require a manufacturer, and the high cost of OEM parts.
It was easy to install since the only fixing method was to pinch the grip end and screw the lever base.
Although many Adventure vehicles are not equipped with a grip heater at the time of purchase, it is useful to some extent for keeping out the cold during the winter, and it is also effective for keeping out the rain.
View detail
Good, thanks webike
It is written in Korean for Korean reference. I was able to get a genuine product that was expensive in Korea at a cheaper price. After ordering, it took about 8 days to receive the item via EMS. The packaging is also neatly sent without worrying about damage. After that, it seems that you will find the items you need here first. thank you. It is written in Korean to refer to Koreans. I was able to obtain expensive genuine products at a cheaper price in Korea. It took about 8 days from order to receipt by EMS. The packaging is also sent neatly without worrying about damage. I think you'll find things you need here first. Thank you. translated by Google Translator View detail
perfectly
Last time I bought a Mirror in 8mm by mistake (lol)
It's 10mm this time
It came on with no problems at all
I knew Mirror was a Quantity:Pair (for Left and Right) It's better to have both
It was identical to the OEM Product of BIRDIE50FI (BA43A)
View detail
The lower side is a bit more
With other people 's impressions "Manual is hard to understand" There was something, but since it was in the original illustration attached to the good parts without removing it, I first felt confused, too. Although it could be mounted without problems, about 2 points.
?Included Parts : of "Washer" Although the number of pieces was suitable, one type was Soft Material : As you can see in the illustration by Rubber, it will be crushed by Bolt, so I added it from my inventory. (Was there another way of using it?) ? On the Design, I think that the wind protection effect has gotten more Large if the lower part of the Cover is overhanging a little more loud.
Either way it was a wonderful thing of OEM, and overall I was happy that Cool and Exactly stayed on me.
View detail
OEM sense of security
With no esoteric work and work progresses to Smooth, as expected, OEMOption.
Design is not as good as Ya Ya, but there is no problem, it is lonely unless it is attached.
I also write other people, but I think that it is even better if you can purchase one by one.
View detail
Excellent appearance. NicePrice
If you are on a V-strike, you can definitely say that the standard product
Purchase at this time if the wind hitting the hand can be reduced
The wind that actually hits the hand actually decreases
3 SeasonGloves Level which can endure even outside air at around 5 degrees
Installation is simple, but the Instruction Manual has only a minimal explanation for the mechanic
Dimensions of parts used and Quantity : Pair (for Left and Right) , Removable method of OEM Parts Number is necessary confirmation
If you look from an authentic OffLoader it may not be reliable but if you are Touring Main
Features, both appearance and price are preeminent
View detail