Reviews
poor in cost performance
Tank Pad was attached before it was scratched because of the large Tank surface.
I think it is well made and thick because it is OEM.
I don't think it would detract from the design of the vehicle.
It is difficult to put it on straight because of its wide surface.
Be careful not to stretch slowly from the edges, otherwise air can easily enter.
View detail
Size is Exactlyw
As expected, the size is Exactly because it is a dedicated product.
I was able to stick it exactly, but the next day Air was … missing in places.
It is only a Protect, not a Knee grip application. I was kind of hoping for a ….
I am considering another one.
I am thinking of putting it on top of this.
View detail
Tank Pad
The price is high because it is an OEM product. It is normal. View detail
Better than nothing, installation hassle
The Female Screw side did not fit as expected, and I measured it with Caliper. 0.5 millimeter. I managed to insert it by shaving the average thickness with Belt Thunder.
Personally, I think Other Brand Product is the way to go!
View detail
Just for looks?
When I saw the product photo, I thought it was a Rubber quality product, but when I looked at it, it was a little thicker Sticker. The sticker is applied by spraying it with diluted neutral detergent, and there are no problems with air removal or positioning. View detail
Ordinary Mirror
I bought it because I wanted to put auxiliary Mirror on my V-stops.
SEA BASS is a Quantity:Pair (for Left and Right) Regardless, I thought MirrorBody was all Opposite Thread Screws and Adapter, or rather Normal Thread Screw conversion with Turner, was the basic method, but this was a normal Normal Thread Screw.
Well, I wanted a Normal Thread Screw, so it was just fine.
View detail
You have to remove the shaft and install it.
The cap on the Right Side is clearly different in size from the Left Side and hits the GunGun so hard that it is impossible to install unless the front is raised and the shaft is pulled out. View detail
VSTROM800 Center Stand
STAND is too high and front/rear Balance is not good.
The center of gravity is on the Front side.
View detail
Fits: SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S
SEA BASSOEMKnuckle cover
Part Number:57300-29811-YU1
Purchased for SEA BASSDR200S (overseas MODEL), an Off car, just in case.
I thought that the Knuckle cover for Base's DF200 DJEBEL would be fine, but when I searched for OEM parts, I found that the cover was for the lever of the DR-Z400S system, so I took a chance and ordered this part number. As a result, it seemed to be the right choice, and it was installed without any discomfort.
Clutch Side Material:RubberDust cover removed, play adjustment range reduced.
*This is not an applicable model, so use at your own risk.
The search function was very helpful FOR JAPAN MODEL not yet released models.
I would like to continue to check and make sure I am not making a mistake.
View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
It is Carbon Style, so it looks just like Carbon!
I bought this for now because the replacement of Mirror situation is Large strange.
It is Carbon Style, so if you look closely, it still looks strange.
The installation is Cover, so it only needs to be attached on both sides!
For now, I am wondering if I should hold on with this until a proper Carbon Mirror cover is released, or if I should replace the Mirror with Carbon Mirrors.
I would have been happy if it were a little cheaper because it is Carbon Style, but it is SEA BASSOEM Parts, so it can't be helped.
View detail
If you can get one foot in the door, you may not need it.
Purchased by Recommendation at the time of delivery.
Initially, it was used.
The footing has improved to the point that I feel less anxious when I back up while straddling the bike.
As for Demerit, the distance to Handlebar has also changed, and the load input from Seat has become weaker, making it harder to get Balance.
I was concerned about Demerit and returned to Normal seat.
If you are particularly concerned about footpeg with your feet, it is more stable if you sit more toward the rear of the Seat and put both toes on.
When I sit in front of the Seat, the footpeg is in the way, so I feel extra footing.
If you are about 165 cm, try this.
I felt that a Handlebar Up Spacer or something similar would be more effective than a low seat, as it would make the posture easier and allow the rider to sit more rearward with less anxiety.
I don't think it is necessary unless the footing is very Limit.
View detail
Diversion of 1000 to 650
As it turns out, it was not perfectly diverting.
To be precise, the Brake Side went on easily, but the Clutch Side did not.
You will need to create your own Bracket.
I chose it for its looks, but regretted it a little. OEMOption.
It also comes with a thick instruction manual, but it is almost useless. Therefore, there are some unusable parts left over.
View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
To OEM installation instead of Option.
We replaced the OEM cap to improve its appearance. Although the shape is the same as the OEM cap, the chrome shine gives the GSX1300R HAYABUSA a slightly more luxurious look. To install, simply replace the OEM O-ring with this cap and turn it. View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
Oil leak?
I have been using this product for about 200 km after installation and when I came back home, I found that the oil was leaking.
Do I need Gasket? I'll give it a few more days to see how it goes.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
SEA BASSMirror cover
Mirror cover of SEA BASSOEM, Material:It is Carbon Style. For the price, this is a satisfactory product. View detail
Heat from under the seat seems to have eased a bit.
When I was driving with GSX1300R HAYABUSAEJ11AOEMSeat, I don't know if it was the under-seat battery, but I was concerned that my buttocks were getting strangely hot, so I noticed the OEM option sheet from RedStitch and replaced it. The seat is a little firmer than the OEM, but I didn't mind that. The heat from under the seat is still felt, but it seems to be a little less than the OEMSeat. I am glad I made the switch. View detail
Tank will look calm.
Tank will be calm as shown in the photo.
The texture is usually good.
Since the mounting base is not included, positioning is quite difficult.
View detail
Fairly hard
I compared OEMSeat and StylishSeat for about 500 km each, and OEMSeat gave me much less buttock pain.
I personally can't recommend it to people who value Cushionability.
View detail
Windproof effect 0, only appearance
I'm sad to have nothing, but I'm not so sure if it's too big or too small… so when I'm not sure, I go with OEM.
I ran a little but did not feel any wind protection.
I bought it just for the looks of it, so it was factored in.
Base is included, so there is no need to worry about rainwater intrusion.
It is necessary to put Sponge on the Base as a preliminary step, so please do it in advance.
The procedure is
Remove Base
BoltQuantity of Headlight clamping:Remove 2pcs and put on Bracket (Bolt replacement)
Base new one.
Windshield on
It is
I'll give Design 2 stars because of the subtlety of the front view.
The design is subtle, but the quality and texture are good, so I'll give it 3 stars overall.
View detail
It looks cool, but what about windproofing?
It's just a look! The windproof effect is not so good.
It does not repel insects.
View detail