Reviews
Ideal for Tank Protection and Makeover!
[How is it used?
I was getting tired of the look of the Normal tank, so I put it on for Makeover.
Was the one you received as per Image?
It is Exactly as good quality and Fit as the Image.
Was the installation difficult?
It is easy to install because it is just covered as it is.
How was your experience with it?
Design, of course, but it also helps prevent minor scratches.
[Included Parts:were they on?
Belt for installation is included.
[Was there anything that disappointed you?
Nothing in particular. If I had to say so, it would be better to cut off the long Belt to reduce the risk of melting due to the heat of the engine.
▼There is one for 14LiterTank, one for 17LiterTank, and one for the last 16LiterTank, so you have to be sure not to make a mistake.
View detail
R1100SBagster tank cover
I have been using BugStar's Tank Cover and Tank Bag since I was riding my K1200S 13 years ago. I was satisfied with the installation, the quality, and the feel of the product, and I am satisfied with this one as well, just as I expected. However, beginners may be confused at first because there is no instruction manual on how to install it. I have installed them on all my motorcycles, especially when I wear leather pants, because the knee grip is excellent and they also protect the tank paint surface from the rubbing of leather pants. It is a must-have for me. The price was cheaper than other sites, so I am satisfied with the Large size. View detail
Used on successive generations of Motorcycles
Easy to attach and detach the Back and Map Case to the Tank View detail
Used every time for long touring.
I use it every time I go on long touring.
Just put it over the Normal tank.
I put it here because it is troublesome to take it out when I put it in Back such as a smart phone, a cigarette, and a map.
Also, it acts as a Cover to protect the Tank from Small stones and such.
good point
Easy to install because it is designed for specific car models.
The material is solid, so it can be used for long touring.
It's the equivalent of a day pack, so it's a great way to reduce rider fatigue.
A bad point
The price is higher than FOR JAPAN MODELManufacturer.
Good things are expensive, this may be natural.
The quality and practicality are high, and it looks Stylish. I think the cost is better than buying a cheap one and replacing it.
View detail
Bagster seat
OEM seat was a bit uncomfortable on long rides so I chose the Bagster seat. Much more comfortable and great quality. Fitted perfectly, very happy with it and would recommend! View detail
I think it's good
First of all, the position of Tag is not possible.
Every time I think if it was on the back I wouldn't have to bother removing it.
Product Tag&Instructions&made in France is sewn into the Fuel cap opening in the most prominent position.
I cut it out with Cutter Knife with a pounding heart.
I didn't want to leave out "made in France", but [SV] I cried and cut it off because it was covered with embroidery of
Motivation
Three months after the car was delivered, there was a scratch on an unexpected place. ('; Ω; `)
I don't remember rubbing it that hard…
After all, there seems to be the cause of Wound, such as the Fastener of the winter Outer, and Tank Pad was thought, but there is resistance in the adhesion of Double-sided Tape, and it is Tank Cover which is adopted this time also.
It's expensive, but you won't kill your paint except with Yellow sand.
Also, it covers the whole thing, so I'm not afraid of a two-grip on a cold morning.
SV650X installation
1.Remove the two pairs of Seat& Side Cowl (Frame cover).
2.Pass the Front belt under the Frame and fix it temporarily. From the length and direction, it is determined that the gap is not in the middle, but under the Frame.
3.The RearBelt is wrapped around the Tank. Judging from the length and direction, it is not Frame installation.
4.Align with Fuel cap opening
5.Wrap the Side belt around the Frame. Because of the length and direction, the side belt should be wrapped around the frame. Not the front and back of the part, but the lower side.
6.Tighten up the four Belt.
7.Put back the two pairs of side Cowl (Frame cover) and Seat to complete.
View detail
I think it's good
First of all, the Tag is sewn in the most prominent place on the fuel cap section.
I'm not sure why it's here. [Product Tag + Instructions + made in France].
I wish it was on the back so I wouldn't have to take it off every time.
Material is a PC? so you don't need to be careful about handling it.
It's washable and almost colorfast.
[Reason for purchase
Three months after delivery, I found a white scratch on one part of the tank…
I do not remember rubbing violently, but after all, Fastener of the winter Outer, etc., it seems that there is a thing to be rubbed, and
I thought about Tank Pad, but I resisted Double-sided Tape which has low endurance, so I adopted Tank Cover again.
It's expensive, but … well, it seems unlikely that Wound will ever be in Tank except for Yellow sand.
Also, it's not cold even if you touch the sub-zero tank. Hence, I don't mind doing a two-grip!
Installation on the SV650X
1.Seat& Remove the two pairs of small Cowl (Frame cover) on the side.
2.Turn the Front belt down, not in the middle of the Frame. Do not tighten.
3.The RearBelt is fixed to the Tank, not to the Frame. Do not tighten.
4.Align and temporarily tighten the fuel cap opening.
5.The side belt goes through the bottom of the X-shaped frame, not the front and back.
6.Tighten up the four Belts while making minor adjustments.
7.I put back the first two pairs of Cowl (Frame cover) and Seat I removed and finished.
View detail
Bagster tank cover Z900rs
I purchased this tank cover because after one week of having my new Z900rs I got a scratch on the tank. Not happy. I frantically looked around for a solution so this couldn’t happen again. Bagster, brown and red cover for my candy tone brown/candy tone orange tank. BRILLIANT. The best accessory I have bought for this bike. The bag fits perfectly, nice and snug and the color is almost the same as the tank. No more worries when parking in tight motorcycle parking bays. I highly recommend this tank cover. If your going for a ride with the lads take it off and show off the original paintwork. If commuting keep it covered for protection. The price is very reasonable compared to having a re-spray. View detail
Touring to circuit driving is OK
Especially Black goes with any coloring because it is Universal I go out always carrying Rain Suit with exclusive Back attached If I lie down a little while driving at high speed, I can put my weight on the Back There is a bulge in the area of the knee grip, which makes the handle less painful You can feel more of a hold on your knees when you are hanging on Now I do not feel comfortable without this Tank Cover The special Back is fastened at four points At the time of refueling, you only have to pull out the key, remove two places, and jump up the Back to Screen side So it's easy to get used to it I'm a ZX-14 user, so the only regret is that it is designed as ZZr It would be great if it were NINJA! View detail
BAGSTER Ready Seat
BAGSTER Ready Seat The seat of my original bike will feel uncomfortable after 30 minutes of cycling. So I decided to choose a seat, a very comfortable seat. I started searching on the Internet and finally chose this brand of seat. It's a very good product. It's very comfortable to ride. There's a small support in the back and it's not too tired to ride. It's really good. If you need to change your seats, you can consider buying this product. View detail
Cool!
I chose glossy Black
I can not wear it because the core Motorcycle is not yet, but I am also very good and cool enough to make texture
Material is PVC's synthetic leather tick, it is neither thin nor sewing firmly Nice
Tank Cover itself is made very strongly
If it says so strongly, what happens when the synthetic leather material rubs and the feeling of grip
There is a feeling of overwhelming but there may be sometimes sticking Tank Pad
I thought that it was a high shopping before buying, but I think that the merit of this making is worth more than the price
It is good to have all the OEM Color
If you disagree strongly, NylonTape for fixing Tank can be cheap against Body's appearance
Because NylonTape itself is sewn together with Tank Cover, it seems a little difficult to exchange it for a good string with yourself
Because it's Exclusive Design, it's a good idea to make improvements that will make the sides less conspicuous
View detail
I changed the installation method
In buying this Back I watched a lot on the video site, but decided to purchase for Stylish and expandability.
In addition, I was accustomed to SeatBack of other Manufacturer, I felt uneasy with the attached Rubber and Hook, bought a coin with 25 mm wide universal Belt and mail order at Home center and made Belt of Seat side by myself.
Even if it says his own work, cut the Belt to moderate length, broke the cut surface with a lighter, prevent fraying, just passed Belt from the Seat behind the vehicle and then put the coat on the Belt.
Pass that Belt through D Ring on both sides of the back and fix it with a cox.
Even with the treatment of the surplus Belt, I think that I was happy to buy it because it can withstand high-speed driving.
Documents are unsuitable due to the shape of the form, so if you can convince it you can satisfy the storage capacity.
View detail
favorite
I do not want to attach a BOX with Bracket and I am looking for SeatBack and I found this, buy Red according to the color of Motorcycle, I feel a little somewhat difficult to install ♪
This is enough if it is the luggage of overnight 2 days, I do not yet know the durability but I want it even if it gets useless.
View detail
Scratch prevention - Dress-up - To Knee grip
Originally thought about putting Tank Pad, I got it here because it is second hand and cheap at hand..
Logo will be ZZr, but I do not care much about myself.
The original color was Gray monochrome, but it was dyed with Q except Black ZZr Logo part.
It will prevent scratches on Tank and Knee grip will not slip
It is easy to do and Large fun is good.
It has become like a special Tank Pad and it is attractive
Tank Pad made by BugStar is expensive, so now
It is not attached..
SIDE's hexagon Quantity for installation and removal : Because it is only 2 pc and the front part, it will not be troublesome even when car wash etc..
View detail
Although a body color is black, it is a Tank cover of why or navy blue.It purchased in order to use the Tank back (BAGSTAR MINEA) purchased at the time of GSX-R600.I think whether it is good also to crack prevention of the Tank and the temperature
Although a body color is black, it is a Tank cover of why or navy blue.It purchased in order to use the Tank back (BAGSTAR MINEA) purchased at the time of
GSX-R600.I think whether it is good also to crack prevention of the
Tank and the temperature rise of the Tank under blazing heat.
View detail