Reviews
R1100SBagster tank cover
I have been using BugStar's Tank Cover and Tank Bag since I was riding my K1200S 13 years ago. I was satisfied with the installation, the quality, and the feel of the product, and I am satisfied with this one as well, just as I expected. However, beginners may be confused at first because there is no instruction manual on how to install it. I have installed them on all my motorcycles, especially when I wear leather pants, because the knee grip is excellent and they also protect the tank paint surface from the rubbing of leather pants. It is a must-have for me. The price was cheaper than other sites, so I am satisfied with the Large size. View detail
Unique to Exclusive Design
[How is it used?
It is mostly worn and used.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
Stability is not a problem.
[Points to note]
If it is cold, it is hard to install. It is recommended to warm it up before installation.
How did it compare to other products?
I have always used the BugStar on all of my previous motorcycles with BugStar settings, and it has a stability that magnet or suction pad tank bags do not have. It takes more time and effort when refueling, but this is more than made up for by the fact that it is a great product.
Other items that would be helpful
It will take a long time to deliver, but look forward to it and wait. The workmanship is a little rough. I would like to see more Tank Bag lineups.
View detail
Fits: TRIUMPH DAYTONA 675 (DAYTONA675), TRIUMPH STREET TRIPLE 675 (STREET TRIPLE675)
Order in July and delivery in October is late, please specify in the product description.
It takes 3 months to deliver, so Cancelation View detail
Used on successive generations of Motorcycles
Easy to attach and detach the Back and Map Case to the Tank View detail
Used every time for long touring.
I use it every time I go on long touring.
Just put it over the Normal tank.
I put it here because it is troublesome to take it out when I put it in Back such as a smart phone, a cigarette, and a map.
Also, it acts as a Cover to protect the Tank from Small stones and such.
good point
Easy to install because it is designed for specific car models.
The material is solid, so it can be used for long touring.
It's the equivalent of a day pack, so it's a great way to reduce rider fatigue.
A bad point
The price is higher than FOR JAPAN MODELManufacturer.
Good things are expensive, this may be natural.
The quality and practicality are high, and it looks Stylish. I think the cost is better than buying a cheap one and replacing it.
View detail
I think it's good
First of all, the position of Tag is not possible.
Every time I think if it was on the back I wouldn't have to bother removing it.
Product Tag&Instructions&made in France is sewn into the Fuel cap opening in the most prominent position.
I cut it out with Cutter Knife with a pounding heart.
I didn't want to leave out "made in France", but [SV] I cried and cut it off because it was covered with embroidery of
Motivation
Three months after the car was delivered, there was a scratch on an unexpected place. ('; Ω; `)
I don't remember rubbing it that hard…
After all, there seems to be the cause of Wound, such as the Fastener of the winter Outer, and Tank Pad was thought, but there is resistance in the adhesion of Double-sided Tape, and it is Tank Cover which is adopted this time also.
It's expensive, but you won't kill your paint except with Yellow sand.
Also, it covers the whole thing, so I'm not afraid of a two-grip on a cold morning.
SV650X installation
1.Remove the two pairs of Seat& Side Cowl (Frame cover).
2.Pass the Front belt under the Frame and fix it temporarily. From the length and direction, it is determined that the gap is not in the middle, but under the Frame.
3.The RearBelt is wrapped around the Tank. Judging from the length and direction, it is not Frame installation.
4.Align with Fuel cap opening
5.Wrap the Side belt around the Frame. Because of the length and direction, the side belt should be wrapped around the frame. Not the front and back of the part, but the lower side.
6.Tighten up the four Belt.
7.Put back the two pairs of side Cowl (Frame cover) and Seat to complete.
View detail
I think it's good
First of all, the Tag is sewn in the most prominent place on the fuel cap section.
I'm not sure why it's here. [Product Tag + Instructions + made in France].
I wish it was on the back so I wouldn't have to take it off every time.
Material is a PC? so you don't need to be careful about handling it.
It's washable and almost colorfast.
[Reason for purchase
Three months after delivery, I found a white scratch on one part of the tank…
I do not remember rubbing violently, but after all, Fastener of the winter Outer, etc., it seems that there is a thing to be rubbed, and
I thought about Tank Pad, but I resisted Double-sided Tape which has low endurance, so I adopted Tank Cover again.
It's expensive, but … well, it seems unlikely that Wound will ever be in Tank except for Yellow sand.
Also, it's not cold even if you touch the sub-zero tank. Hence, I don't mind doing a two-grip!
Installation on the SV650X
1.Seat& Remove the two pairs of small Cowl (Frame cover) on the side.
2.Turn the Front belt down, not in the middle of the Frame. Do not tighten.
3.The RearBelt is fixed to the Tank, not to the Frame. Do not tighten.
4.Align and temporarily tighten the fuel cap opening.
5.The side belt goes through the bottom of the X-shaped frame, not the front and back.
6.Tighten up the four Belts while making minor adjustments.
7.I put back the first two pairs of Cowl (Frame cover) and Seat I removed and finished.
View detail
Corona disaster and 4 months to deliver!
[How is it used?
When I put this on, I almost always leave it on.
Was the one you received as per Image?
It was not the same as the stitching in the reference image.
Rear Tank Bag Installation Position and TankQuantity:Pair (for Left and Right) The bottom Design is different in
How was your experience with it?
With this cover, you don't have to worry about scratching your tank. I'm very careful when I put my keys, pants belt and helmet on the handlebar key, but with the Cover, I don't have to worry. It will be all right.
[Points to note]
As the title says, it took 4 months to deliver instead of the usual 1 month due to the Corona disaster.
When I put it on at the beginning, I thought it was a bad fitting Gap thing, but it was because it arrived in the middle of winter.
I warmed it up with a heater and held it down until it softened and cooled down, which I did twice, and it fit perfectly.
I also warmed up the small floats with Heat gun etc. and stretched them.
In my case, I wanted to make it RedBlackTwo-tone color, so I painted it with Dye Q.
View detail
The logo design is lame. I don't want it.
Material and sewing is solid. However, the look was different from the introductory photo. It wasn't in the introductory photo. "GSX It is embroidered with the words "Large", and the logo design is tacky. It is very disappointing. View detail
Touring to circuit driving is OK
Especially Black goes with any coloring because it is Universal I go out always carrying Rain Suit with exclusive Back attached If I lie down a little while driving at high speed, I can put my weight on the Back There is a bulge in the area of the knee grip, which makes the handle less painful You can feel more of a hold on your knees when you are hanging on Now I do not feel comfortable without this Tank Cover The special Back is fastened at four points At the time of refueling, you only have to pull out the key, remove two places, and jump up the Back to Screen side So it's easy to get used to it I'm a ZX-14 user, so the only regret is that it is designed as ZZr It would be great if it were NINJA! View detail
Large Satisfied with the change
I wear it all the time because of the color and texture
The Tank Cover is unusual, or you can often feel the eyes around you Moreover, because the tank is not scratched, I can feel secure while riding and storing
View detail
Not a good fit It doesn't look good either
Not a good fit Looks not so good either But it seems to work as a Tank Cover for BugStar I'm going to have to buy a Tank Bag View detail
Number one for performance, but installation is..
I used to use the Cover and Bag here on a Machine I owned in the past
Quantity:Available in a set, you can use the old Universal Product Tank Bag for anxiety will be eliminated at all
No matter how much you fly it, it will never come off and never fly away No matter how you fly it, it will never come off or fly away
There are many people who put a strange seal on the area between their legs to avoid damaging the tank, but
The entire tank is perfectly protected here, so you can use Fastener and Silvera If Habit or any other Gold genus hits GunGun
Moreover, a fall of a standing start wouldn't hurt the Tank, ma'am
However, the face of motorcycle design, Tank, is protected by this chastity belt So it looks.... yeah
If there's a drawback other than looks, it's wearability
If it is a four-shot air-cooled, which was the old-fashioned Tank, it is easy to remove and install, but today's Machine, which has many things, is Large strange already
Tank off, Duct off, Cowl off, Fuse around...
There is no instruction manual from the beginning, so be prepared to kill it the first time and try to be patient with the first shot Please
But when I think of it in practical terms, I can't think of anything else I can't imagine life without it That's a lie
Well, the drawback to the largest is that it's expensive anyway
But Merit's outperforms it, though, so I'm buying a Repeat
So it's an excellent choice for those of you who use the Machine with GunGun
View detail
Cool!
I chose glossy Black
I can not wear it because the core Motorcycle is not yet, but I am also very good and cool enough to make texture
Material is PVC's synthetic leather tick, it is neither thin nor sewing firmly Nice
Tank Cover itself is made very strongly
If it says so strongly, what happens when the synthetic leather material rubs and the feeling of grip
There is a feeling of overwhelming but there may be sometimes sticking Tank Pad
I thought that it was a high shopping before buying, but I think that the merit of this making is worth more than the price
It is good to have all the OEM Color
If you disagree strongly, NylonTape for fixing Tank can be cheap against Body's appearance
Because NylonTape itself is sewn together with Tank Cover, it seems a little difficult to exchange it for a good string with yourself
Because it's Exclusive Design, it's a good idea to make improvements that will make the sides less conspicuous
View detail
Tank Paint peels off Rust develops.
It is used for commuting everyday, and it has been installed for many years with Tank's scratch prevention.
It's thick and the surface slides considerably.
* Jeans x, leather Pants ○
View detail
It can be used depending on Ideas
It is a convenient item when you want to add a favorite Tank Bag to the Bagster tank cover. If you can select Magic tape, there is nothing to say - - -. View detail
Fits: KAWASAKI 1400GTR, KAWASAKI CONCOURSE14 (Concourse14)
It was worth waiting for
As I posted it waited 3 months after placing an order. Material is synthetic leather, but texture is good and Large is satisfied satisfied. Easy to install and hassle. I feel that the price is high due to Production to order, but it was nice excited because it looks like Tank's scratch prevention and gorgeous looks. View detail
Satisfied with making BugStar
I am satisfied with Fitting making by car model. Tank Bag in Aluminum Tank No problem. Old MODEL is also Lineup and it is saved.
At first it seems tough, but I can gradually get along with it.
View detail
Fits: DUCATI MONSTER S2R 1000 (MONSTER S2R 1000), DUCATI MONSTER S4 (MONSTER S4), DUCATI MONSTER S4R (MONSTER S4R), DUCATI MONSTER S4RS (MONSTER S4RS), DUCATI MONSTER600 (MONSTER600), DUCATI MONSTER900 (MONSTER900)
Good luck Dress-up
It is as per the description of the item.
Installation method etc etc. There is no Instruction Manual, but somehow it is possible to install.
Although it kept waiting quite well, it is a good product. It will be exclusive.
To luxury, I wish I could open and close the Tank even with Cover installed - - -
Since the favorite car frequently becomes Slant, the frequency of lifting Tank is very high compared to domestically produced cars.
It would be better to recognize it as covering each time you go out.
View detail
There is no problem except for the delivery date
It takes time to pay the delivery fee. It took almost 2 months. No mounting problem, no feeling of use. Making is truly BugStar. I want the resurrection of Small eyes Bag's Lineup. View detail