Reviews
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
Genuine GBRacing Pulse Cover for Kawasaki Ninja ZX10R 2016
There are some pretty important parts behind the standard pulse cover so this is a must to finish off the protection job. Although it is a small piece, it does an important job. Even though I have the generator cover and the clutch cover, I had to get this one too to make the bike look complete. I cross referenced the part numbers with GBRacing website to make sure I had the right one for the Kawasaki Ninja ZX10R. The cost that Webike sell for is really good and around the same as I could source locally. I could not tell you for sure what exactly the composite of these covers is but they have fibre and plastic from what I have read. GBRacing have made a composite of the materials to be durable, long lasting and take a good beating if they need to and yet, still protect the bike. They also look really cool. When I got the packages, the pulse cover looks amazing. The finish is a smooth satin black with some great detail in the logo and lettering looks really cool. Install took around an hour for all 3 covers so not a hard job and anyone can do it. Just remove the bolts stated in the instructions and replace with the ones proveided in the packet. Super simple. End result is awesome. Very pleased with how it all looks and now I do not have to worry about damaging anything. Thank you Webike, great help. View detail
Fast and furious tokio. Fast and furious tokyo.
"Original product, reasonable price, fast delivery. Thank you. Greetings from Japan.
Original good, good price and fast delivery. Thanks. Regards to japan. -------------------------------------------------- -------- Original product, reasonable price, fast delivery. Thanks. Greetings to Japan. "Powered by Google Translator"
View detail
Fits: HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA CROSSCUB110
Beautiful Clearance with MORIWAKIShortMONSTER S2
[How is it used?
Street riding.
Was the one you received as per Image?
The quality is good enough because it is made by Takegawa.
Was the installation difficult?
If you can lie on the ground and work on it, you can do it in 15 minutes.
How was your experience with it?
The exquisite clarity with MORIWAKI muffler is irresistible.
Other items that would be helpful
Installation Point or hang
Always work with the main stand up, and Torque control is important.
Availability and clarity of Instruction Manual
The explanation is sufficient since we only need to pull out four Bolts and reattach them.
Opinions and requests to Manufacturer
High quality, high price.
View detail
Easily Black Spec.
[How is it used?
Street riding.
Was the one you received as per Image?
It is not so bad, but not so bad.
Was the installation difficult?
Just remove one Screw and insert it.
How was your experience with it?
Blinker's Plating was a bad girl and I was concerned about it, but here it all went away.
[Was there anything that disappointed you?
Roughness of the manufacturing process. BALI removal and file hanging are essential before installation because of the great BALI.
Other items that would be helpful
Availability and clarity of Instruction Manual
No Instruction Manual.
Opinions and requests to Manufacturer
I would like to see you at least take BALI.
View detail
Excellent piece
Very good piece, original Honda, and new. It has an excellent finish, and also comes with a genuine gasket. Reliable. It fits exactly on my motorcycle. I recommend her. View detail
Excellent part
Great piece, original Honda, and new. It has an excellent finish. Very Reliable, and robust. It fits, perfectly, in the my motorcycle. I recommend her. View detail
very good
I have received it well. It looks good and you feel mentally stable after using it. After installing it, it looked easy, but since it was floor work, my back hurt and it was quite difficult. This is a level you can do on your own if you take the necessary tools and read the manual calmly. Very satisfied. -------------------------------------------------- -------- I have received it well. It looks good and you feel mentally stable after using it. After installing it, it looked easy, but since it was floor work, my back hurt and it was quite difficult. This is a level you can do on your own if you take the necessary tools and read the manual calmly. Very satisfied. Powered by Google Translator View detail
NS400 Carb rebuild
Well made part fits well with no issues, replacing the original plastic part. Finish on part is good, got the replacment rubber sealing caps to complete as the original rubber had gone hard after 40 years. View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR
Lowdown link
Excellent quality they fit perfect with no alterations needed. Look great on the motorcycle. Would recommend them to anyone who wishes to lower their bike. View detail
Solid power up and Minimoto-like style
[How is it used?
My CRF125F has been heavily used in Motocross and HardEnduro since I bought it, but I have improved the suspension and controls so that I can run at a good pace. I'd like to make it a little more powerful." I have come to think that this is a good idea.
However, Engine Displacement VolumeUp and ECUTune, which are available in overseas products, are not so cute and expensive for Minimoto, so we chose to replace the Exhaust System as a tuning that also includes appearance.
It is the Exhaust System for CRF125F sold from various manufacturers, but first of all, I chose Delta because of its cute Minimoto-like appearance and the fact that it is published in the Graph etc. that it is effective, and also because of the articles on the Web about the replacement and installation. I chose Delta which had a sense of security because it was published on the web.
We were impressed by this DirtFreak product, which is indeed the conscience of Japan's off-road industry.
Was the one you received as per Image?
The quality of the exhaust pipes is excellent, the bending of the exhaust pipes is beautiful, and the silencer assembly accuracy is excellent.
It was obvious that it was lighter than the OEM exhaust system in my hand, and I had high expectations for the two-layer thicker exhaust pipe.
The design of the Silencer exit is like the TRAIL from a long time ago, and it has a Minimoto-like cuteness rather than the parenthesis of the newest model, Motocrosser.
Was the installation difficult?
The instruction manual is included, so I was able to install it without any problems. In addition, the distributor's own media published more detailed installation articles on the Web, so even a clumsy person like me was able to install the system without any worries.
It is essential to install them in such a way that they do not become Overtorque in any part. (for stupidity) 。
How was your experience with it?
During a test run after installation, the change in sound quality is first noticed.
I can hear the sound of the Delta Exhaust System when I open the Axel, and I feel nostalgic because I used to have the Delta Exhaust System on my other street-going car in the past. I feel nostalgic about it.
Impressions after driving There's a definite sense of power up." The low rpm toddling feeling of the CRF125F, which is also easy for beginners, is maintained, and when the Axel is opened and the engine is revved up, the engine has good extension and the speed rises quickly and smoothly.
I felt that I could climb more easily than before because the acceleration was better even when I was in full 2nd gear, which is often used for hill climbing on the HardEnduro.
Also, the exhaust pipe has been thickened to make it easier to remove the exhaust. I also feel that the embargo when the Axel is turned off has become calmer, perhaps due to the effect of the larger exhaust pipe. I think this is a benefit for beginners who tend to feel awkward when operating the Axel at low speeds.
I honestly didn't see the effect of the weight reduction. lol The body is light to begin with, so it's easy to wake it up if it falls. ....
[Included Parts:were they on?
Exhaust Gasket
・Heat Guard
The two items are not included in the package, so it is recommended to purchase them separately at the same time to make the work Smooth.
Also, when removing the OEM exhaust system, the bolt may be very hard due to heat, etc., so a penetrating glide agent such as Raspene may be a good idea.
In summary, we were very satisfied with the design, solid performance, and quality of the product, which is typical for Minimoto.
There may be some that perform better, but I don't think anything too expensive would suit Minimoto.
Pit bike in the past (CRF50F) Custom was once popular in the past, but as a result of the ever-increasing performance and prices in that way, Boom has suddenly converged, so ..... I hope that will not be the case with MinimotoBoom this time!
View detail
To prevent Axle Nut from loosening on older cars.
I used this as a split pin to prevent the Axle Nut from loosening, which is common on older cars. I always do this because it is easier to purchase than to look up the OEM Product No. and order one at a time.
For Motorcycle, the 3 sizes included in this kit should be sufficient for Large.
View detail
comfortable to wear
Size of foot:26.5cm. bought the same size. I like the color and texture.
I noticed that my 30 year old Mountain parka was Sierra Designs, and since such a company also produces Motorcycle Shoes, I bought it, thinking it would probably be durable. I expect them to last a long time.
View detail
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
Fits: Others
Power supply for PanasonicGORILLA
I don't mean to brag, but Motorcycle is Polishing Specialty The length of the Chain cannot be adjusted in
The installation work was done by a Motorcycle shop that we are familiar with.
The installation fee Gold is included in the X-ADV used car delivery and maintenance fee Gold, so the details are unknown.
The USB port is designed to be waterproof, but the plug port is facing down to prevent rain.
I have only used it once, but I have a feeling that Large will be very active in the future.
The cell phone Navigation is inconvenient for some reasons, such as signal loss in mountainous areas. We do not use it because of the high communication charges.
I use a PanasonicGORILLA which I also use with my own car. (VWGolf's Navigation has little information and does not show Costco. (VWGolf's Navigation is not very informative and does not show Costco, and the other information is also very poor.)
View detail
Recommendation for those who are anxious to draw a Maintenance Stand alone!
Although an instruction manual is included, it does not explain the details of how to assemble the unit, which was confusing at first. I would have liked to have a guide to the screw holes to be used for the approximate number of inch tiers.
There was a product video on how to use and assemble the product, so I checked it out and assembled it. The video was very helpful.
The NINJA1000's front tire (120/70Zr17) was firmly secured and stood on its own. It also felt stable when lowering the bike.
I used to do maintenance only with the Rear STAND, but when I lifted up the bike by myself, I didn't hang it properly and it fell over. I wish I had bought it before I stumbled...I would like to recommend this product especially to those who work alone to avoid damaging a large motorcycle.
View detail
No fogging, Glasses are OK.
I bought it because I was interested in Ariete, which is famous for its Lens not fogging up.
It actually works without fogging up. I had bought cheap Goggles to try out and was impressed because they fogged up easily.
It was meant to be EUROFit, but I have been able to use it without any particular concerns.
It was supposed to be compatible with Glasses, but it is working fine. However, it may be difficult to use depending on the glasses used by each person, but that cannot be helped.
The width of the insert is about 15cm and the length is about 4.5cm. If the Temple is extremely soft or hard, it may cause pain in the temples, but that is up to the individual.
There is no nose guard and no Large Air Intake etc., but I personally think this is fine because it makes for a simple design.
View detail
Fits: DUCATI HYPERMOTARD 939 SP, DUCATI XDIAVEL S, DUCATI MULTISTRADA 1200 DVT S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT ENDURO, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V2 S, DUCATI STREETFIGHTER V2, DUCATI PANIGALE 899, DUCATI PANIGALE 959, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE V2
I love it, but...
I like the texture and design.
Even when tightened to the end, the inner groove on the clutch cover side? The edge of the O-ring seems to collide with the edge of the cap side. The edge of the cap side seems to collide with the inner groove of the clutch cover side even though it is tightened all the way. I am worried about the OIL blotch. I am worried about OIL seepage when I use it from now on.
If it's not there, it's not a problem.
View detail
Waterproof parts should be provided by Spare.
I would like to thank you for selling this kind of small parts.
Waterproof performance degrades over time as a matter of course; if it's in Catalogue, you should buy it.
The evaluation includes imagination and expectation because the replacement work has not been done.
Of course, there is no Instruction Manual.
View detail
Second purchase of this.
This is actually the second time I have purchased this.
The first one peeled off after about 3 years.
I wanted something else from Japan but couldn't find anything that fit my 2014 GSX1300R HAYABUSA, so I bought the same one.
No complaints other than adhesive life.
View detail