Reviews
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
Aluminum Billet master end
I have a collection of G−CRAFT around the Rear master. View detail
G-Craft Reserve Tank-Less Kit Type 3
About quality and texture Good design and quality About the feeling of use The components were chosen to fit the ape 100 really well Products to buy together 45518-GM9-711 45520-GM9-711 Difficulty of installation easy Cost performance and comparison with other products be better than the standard About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing When thinking about the rear brake oil reservoir holder in the process of converting to an ape100 disk, this product can be used better and the design is cool View detail
Gold color Pivot pin
[How is it used?
Installed and traveled about 200 km.
Was the one you received as per Image?
Street Image
Was the installation difficult?
Simply loosen and replace the Pivot pin and Nut.
However, GALE SPEED's Wire Clutch Holder has a very thin washer between the holder and lever, and I almost lost it when the washer collapsed. The Pivot Pin of the early equipment seemed to be coated with Locktite and was a little hard to loosen. Early Pivot pins had bearings on the lever side and did not seem to be coated with Grease. When installing the ultra-thin washer, I applied a small amount of grease to the lever side and stuck it on while inserting the pivot pin.
How was your experience with it?
The feel is the same, but the Brembo master side has also been changed to Gold-colored Pivot, so the Quantity:Pair (for Left and Right) I am very happy with the matching look.
[Included Parts:were they on?
Pin only.
[Was there anything that disappointed you?
None
A word of caution...do not lose your ultra-thin Washer.
View detail
Tension will go up!
It's a prominent place to be while driving or getting off the motorcycle, so it's a great tension builder!
The Yoshimura logo is also embroidered for a luxurious feel.
I recommend it, it's easy and cool!
View detail
Fits: HONDA CBR900RR FIRE BLADE, HONDA CBR900RR FIRE BLADE
OEM Material:Replacement from Plastic.
OEM Material:I was not satisfied with the PlasticTank, so I replaced it with this one, and although the STM tank was also a candidate, the position of the fluid confirmation window was opposite, so although it was not for DUCATI, I checked the manufacturer's website to see if it was compatible. The color is black, so it is not so noticeable, but I am satisfied with the subtle improvement in quality. View detail
I like it.
I bought it to match the YOSHIMURA Exhaust System for a dress-up, and since the base color of Shinobu Sen's '18 is BlackRed, I was torn between Black or Red, but decided on Red.
Red is conspicuous.
The embroidery of YOSHIMURA's loco is very well done. I like it because it has a luxurious feel.
It has not been used yet, but I think it will fade due to age-related deterioration caused by the sun, wind, and rain, but I think it is a good product.
View detail
Straight Nipple for Master Cylinder
[How is it used?
It was originally intended to be used for the Front or Rear Brake master, but it could also be used for the Sam Brake master.
Was the one you received as per Image?
As per Image
Was the installation difficult?
With Snap Ring Pliers, removal and attachment is easy.
How was your experience with it?
The Brake hoseLine is now on target.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
GALE SPEED Straight Nipple for Master Cylinder
The Nipple that comes with GALE SPEED's Rear brake master and Thumb brakes is L-shaped, so it was able to alleviate the forced bending of the brake hose. View detail
Inexpensive YOSHIMURATune
Installed on a GSX-R1000R 2019
This is YOSHIMURA's reservoir Tank Cover.
It is mainly for visual customization, but it also has a functional meaning of covering the tank so that Fluid does not fly out when it oozes from the tank.
If it is simply a reservoir Tank Cover, it can be sold for as little as 100 yen.
You can also just buy a Wrist band at the extreme 100s.
On the other hand, this one costs about 1,000 yen, which is rather expensive for a reservoir tank cover.
The cost of the Yoshimura logo is very inexpensive.
Also, things are solid.
Pile fabrics, even those sold at similar prices, quickly stretch to the point of uselessness.
In this respect, this is not a pile fabric, but a sleeve rib-like fabric with a firm tightness, so it is very durable.
I have been wearing it for more than two years now, and it still retains a solid Fit feeling, although there is some fading.
As for the Size, the reservoir tank of Large size (The one used mainly for Brake) Just fit to the
CinderellaFit on a Tank of R1000OEM Nisshin Radipon.
Until we arrived at this product, the reservoir tank cover was a consumable item that had to be replaced every time it was worn out, but after using this product, it is no longer a consumable item.
In that sense, it is a good product with high cost performance.
View detail
Titanium lover
The texture and appearance are nice.
I love Titanium. So, exchange.
View detail
Works well with Color Fluid
Used on s1000rr competition vehicle.
Brake master is GALE SPEED's Elabo RateMASTER, and the Reserver tank is also from the same brand.
There is no problem with the hose diameter. I purchased a 10cm hose and adjusted it by cutting the excess portion after checking the actual distance between the MASTER and the reserver tank.
The 30cm is probably for those who are replacing both the Front and Rear Hoses, so if you are replacing only the Front brakes masterHose, the 10cm is sufficient.
As for my impression of the appearance, it gives a custom feel. As for me, my main aim was to check the fine air in the hose, but it works well with the Green Fluid. I like Parenthesis a little bit." This is the case
There is nothing in particular to note, but the hose itself is harder than you might imagine, so bending it while warming it with a dryer or something will work well.
View detail
Fits: SUZUKI sepia, SUZUKI sepia, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI Lets, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100, SUZUKI ZZ
Good spare switch
About quality and texture
Good workmanship, looks very similar to the original switch, fully corresponds to the original shape and dimensions for installation on a standard seat, works great and has a characteristic click
The dimensions of the contacts for connection also correspond to the original
About the feeling of use
It is installed in a standard place under the brake machine, can be screwed both with the original one and with the screw that comes with the kit, it works correctly, the brake light turns on in a timely manner, an excellent replacement for the original part that failed
Products to buy together
You should not buy anything separately, the kit includes a mounting screw and the brake light switch itself
Difficulty of installation
Easy installation on the seat with a mounting screw on a Phillips screwdriver
Cost performance and comparison with other products
Low price, excellent compatibility and similarity with the original, should be regarded as a good substitute
About shipping and packaging
Packed in a soft bag, the switch is very soft and not damaged in transit
Any concerns, cautions, or advice when purchasing
Always look at the compatibility of this item with your scooter for 100% compatibility
-------------------------------------------------- -------- About Quality and Texture Good quality manufacturing, outwardly very similar to the original switch, fully composes the original shape and size for installation to a standard seat, works great and has a characteristic click Contact sizes for connection also correspond to the original About the Feeling of Use It is installed in a standard place for a brake machine, can be screwed with both original and screw, which is included, works correctly, the stop signal turns on in a timely manner, an excellent replacement of the original part of the failed Products to Buy Together Separately, you should not buy anything, there is a fastener in the kit and the stop-signal switch itself Difficulty of Installation Simple installation on the seat with a fastener on a cross screwdriver COST Performance and Comparison with Other Products Low price, excellent compatibility and similarity to the original, should be considered as a good substitut e ABOUT SHIPPing and PACKAGING Packed in a soft package, the switch is very soft and is not damaged during transportation Any Concerns, Countions, Or Advice When Purchacing Always look at the compatibility of this product with your scooter for 100% compatibility Powered by Google Translator
View detail
Master cylinder cap screw
The master cylinder cap was silver and the same color as the Screw, so it was changed to a Black colored Screw.
Surprisingly, Screws in the same shape and Black color are not sold in stores.
It's a small detail, but I think it has improved Parenthesis by adding a sense of crispness.
It is a recommendation because it is very inexpensive and only requires the replacement of Screws.
View detail
fashion-conscious
Ideal for One point fashion, Exhaust System and Fender Eliminator are used to match. View detail
Fashion [Color] SmokeTank
It was installed at the same time when the Gale MASTER was replaced.
[Color] The Handlebar area looks nice and tight because it is Smoke.
I like that the fixed part can be rotated to produce the Hose at any angle I want.
View detail
Shape is OEM itself
Used for plate Screw with OEMFront master cylinder cap.
I thought about replacing it with a stainless bolt, but I was worried about the electrical corrosion of the aluminum cylinder, so I decided to go with a Titaniumium bolt.
I think it is better than aluminum because it is stronger and lighter and less likely to gnaw on the screws like Stainless Steel.
4pcsQuantity:Since it is a Set, it is safe to say that there are two bottles in Spare.
View detail
regular product
A classic product, for better or worse.
It seems more durable than regular Hose.
View detail
It is very parenthesis to keep it as a decoration.
It looks very good integrated with the Rear master.
I mean, why is it sold separately?:It's like, "Leave it to Set.
I removed it because I now have Thumb brakes installed... is that what you mean?
View detail
Parenthesis OK
Parenthesis is good, it's just...
Removed for installation of Sam Brake master
View detail
This is my third purchase!
This is the third time I have purchased this product, and I buy it every time I change my motorbike.
This one completes the Tank (Hose) within easy reach...combined with Active's KaEraserd, it's pretty darn smart…!
Naturally, the Fluid capacity will decrease due to the loss of Tank, and since the air passage is gone, the Fluid movement may not follow the Pad's decrease. When I notice this, I remove the lid and adjust the air pressure. (It is slightly pressurized when the lid is pushed in, so maybe it is a matter of feeling?)
View detail