Reviews
Fits: YAMAHA TZR50, YAMAHA RZ50, YAMAHA TZM50, HONDA NS-1, SUZUKI street magic, YAMAHA TZR50, HONDA XR100 Motard, HONDA NSR50, HONDA Dream 50, HONDA XR50 Motard, HONDA NS-1, SUZUKI street magic, YAMAHA TZR50, HONDA XR100 Motard, HONDA NSR50, HONDA Dream 50, HONDA XR50 Motard
It is good kana rather than there is nothing, although it does not die easily to a master cylinder even if it fails to get off the ground!?
It is good kana rather than there is nothing, although it does not die easily to a master cylinder even if it fails to get off the ground!? View detail
It purchased for the purpose of the dress-up up. Since attachment only removes one bolt which has stopped the brake lever, it is very easy. As for the attached comment, the circumference of a handle becomes a beauty!! Since it is fairly high when
It purchased for the purpose of the dress-up up.
Since attachment only removes one bolt which has stopped the brake lever, it is very easy.
As for the attached comment, the circumference of a handle becomes a beauty!! Since it is fairly high when the back falls and a master cylinder breaks, it is safe if this is attached ^^
View detail
Fits: KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Z250, KAWASAKI Z400
Mounted on Z400Front brakes master
[How is it used?
Model used:Z400
Driving in Touring Main.
About 2 weeks after installation.
Was the one you received as per Image?
The red coloring of the Anodized is also good, and I felt it would be good to increase the number of red Anodized areas on the body.
Was the installation difficult?
To install, remove the Fluid Tank Cap Mounting Bolt and install this product without removing the Fluid Tank Cap, using the long stainless steel bolt provided.
The work itself is simple, but since the bolt on the Fluid Tank Cap has a +Screw, it must be removed using a good precision driver.
Note that +Screw should be loosened with a pushing force of 6 and a turning force of 4, rather than with full force in turning, to avoid licking the screw head.
How was your experience with it?
Although it has only been installed for a short time, the coloration of the Anodized is satisfactory and has improved the appearance.
Since this product is a Guard, there seems to be no doubt that it will protect the MASTER well in terms of shape, although it is for insurance purposes in the event of a fall.
Although it can improve the appearance, Z400 can recommenendation to those who compete in Gymkhana competitions with Normal master.
High SIDE may not work, but SlipDown would provide protection.
The holding of Anodized will be verified in the future.
The edge processing was a little lax in some areas, and it was a little unfortunate that the anodized material was a little peeled off in these areas.
[Included Parts:were they on?
Stainless bolt
[Was there anything that disappointed you?
Edge treatment
Point and hang of installation
Loosening of Fluid Tank Cap+Screw
Pushing force 6, Turning force 4
Installation of the included Stainless bolt
To avoid seizure and other troubles whenever possible, it is recommended to use Anti-seeds, CopperThread, Molybdenum grease, and Molybdenum anti-seizure agent for tightening.
Note that a Hexagonal Wrench should be used for installation.
View detail
Fits: SUZUKI KANATA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
The price is high, but I am satisfied with the product.
The screw is also included for installation, and it is easy to just put it over the OEM Master Cylinder.
Also, the Gold color is stronger and more luxurious!
View detail
Fits: HONDA PCX, HONDA Dio110, HONDA ZOOMER-X, HONDA MONKEY125, HONDA CT125, HONDA MONKEY125
To dress-up the Handlebar area
Purchased for protection Plus looks.
The Handlebar area is always in view.
Custom is highly satisfying.
View detail
Fits: YAMAHA TZR50, YAMAHA TZM50, SUZUKI STREET MAGIC, YAMAHA TZR50, YAMAHA RZ50, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NS-1, HONDA DREAM50
Minimize damage
It helps prevent Fluid leaks in the event of a fall. View detail
Fits: HONDA PCX, HONDA Dio110, HONDA ZOOMER-X, HONDA MONKEY125, HONDA CT125, HONDA MONKEY125
Dress-up effect rather than practicality
It is better to have Parts in case of emergency.
Usually as a dress-up! Looks better now!
It's a totally different atmosphere without it!
View detail
Fits: HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA TE150, HUSQVARNA TE250, HUSQVARNA TE300, HUSQVARNA TX125, KTM 125XC-W, KTM 150XC-W, KTM 200XC-W, KTM 250EXC-F, KTM 250XC-W, KTM 250XCF-W, KTM 300EXC, KTM 300XC-W, KTM 350EXC-F, KTM 350XCF-W, KTM 350XCF-W, KTM 450EXC-F
Fallen cannibals
Since I have been running more and more in Narita, Hino, and Whitei, I installed this as a precaution to prevent the Clutch master from being damaged and becoming undriveable. The actual product is very heavy and rigid, and I was worried that Handling would become heavy. I was worried that it might make the handling heavier, but I didn't feel any effect. So far, Clutch master is safe. If there is a possibility of hitting the rocky ground or the trunk of the tree, I think that it is the Parts that there is no loss if I install it. View detail
Just in case.
It protects the Master Cylinder and the Throttle in the event of a fall.
It was easy to install and seems to be strong enough.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4R
Master cylinder guard
It is a product to protect Master Cylinder at the time of a fall, but Dress-up effect is also high, and it is a good product. Because it is a part that enters eyes while driving, there is a dress-up effect more than I thought. View detail
Fits: YAMAHA TZR50, YAMAHA TZM50, SUZUKI STREET MAGIC, YAMAHA TZR50, YAMAHA RZ50, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NS-1, HONDA DREAM50
Master Cylinder cannot be cut.
If you fall over and scrape it off, the Fluid will bleed. I think it's good because it prevents that. View detail
Fits: Others , YAMAHA NMAX125, KAWASAKI KSR110, KAWASAKI Z125PRO, KAWASAKI Ninja250R, KAWASAKI KSR PRO, KAWASAKI D Tracker 125, HONDA PCX160, HONDA PCX HYBRID, HONDA PCX, HONDA PCX150, HONDA MSX125, HONDA GROM, HONDA MSX125SF, HONDA ADV150, HONDA XR100Motard, HONDA Ape100 Type-D, HONDA CB125R, HONDA MSX GROM, HONDA CROSSCUB110
Ideal for those who want One point
It is only one item to be installed on Master Cylinder, but it attracts attention.
I decided to use Gold to match the color of the front fork.
It's a world of self-satisfaction, but I would recommend it to myself.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Master cylinder guard
I bought this to protect my cylinder in case of a fall and for dress-up.
Cut-out parts that are in view when driving will increase in tension.
View detail
Fits: HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA TE150, HUSQVARNA TE250, HUSQVARNA TE300, HUSQVARNA TX125, KTM 125XC-W, KTM 150XC-W, KTM 200XC-W, KTM 250EXC-F, KTM 250XC-W, KTM 250XCF-W, KTM 300EXC, KTM 300XC-W, KTM 350EXC-F, KTM 350XCF-W, KTM 350XCF-W, KTM 450EXC-F
Clutch master to prevent damage
I've been worried about riding in the woods, on a course, in Stir, etc., where a failure could break the clutch master and make the bike unrideable, since I stopped using the ClosedHand guard. I've been using it for a while now, and I've never had a problem with it. View detail
Fits: HONDA PCX, HONDA Dio110, HONDA ZOOMER-X, HONDA MONKEY125, HONDA CT125, HONDA MONKEY125
To Accent around the Handlebar
I like the Logo of Mukawa on the front because it is casual.
I wanted to put a Red Accent on the Handlebar, so it's self explanatory.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4R
Black on Black
If you bend the Handlebar all the way, it will hit the Cowl, but it's within the range. View detail
Fits: Others , YAMAHA NMAX125, KAWASAKI KSR110, KAWASAKI Z125PRO, KAWASAKI Ninja250R, KAWASAKI KSR PRO, KAWASAKI D Tracker 125, HONDA PCX160, HONDA PCX HYBRID, HONDA PCX, HONDA PCX150, HONDA MSX125, HONDA GROM, HONDA MSX125SF, HONDA ADV150, HONDA XR100Motard, HONDA Ape100 Type-D, HONDA CB125R, HONDA MSX GROM, HONDA CROSSCUB110
I changed the Front Master-CylinderCap.
[How is it used?
I installed it on top of the current master cylinder cap.
Was the one you received as per Image?
Yes, you're right, but I was hoping for something that would replace the Cap itself, and that's exactly what I got.
Was the installation difficult?
Installation was easy, just replace the screw of the current Master cylinder cap and tighten the body.
How was your experience with it?
One point custom was made by shining in Gold color!
[Included Parts:were they on?
There were two long screws to replace the body.
[Was there anything that disappointed you?
No, but it would have been nice to replace the Master cylinder cap itself.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR600RR, KAWASAKI Ninja250SL, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI Z125 PRO, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI KSR110, KAWASAKI 250TR, YAMAHA XT250X, YAMAHA WR250X, YAMAHA WR250R, HONDA XR50 MOTARD, HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250BAJA, HONDA XR250, HONDA XR230
It works!
It is used with GymkhanaSpec.Z250SL.
Using the Hexagonal Wrench and the included Screw
It just fits over the OEM master cylinder cap.
Ready to install.
During my first fall at Gymkhana.
Thanks to this, Master Cylinder is safely protected and
I was able to resume my run.
The price is not too high.
I killed the Master Cylinder.
Based on the fact that you won't be able to stop.
I think it's a great cozy!
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4R
Dress-up, in case you...
I bought it in case something happened to me and hoping for a dress-up effect.
As for the mounting method, the fixing screws Quantity:It was simple only to change 2pc, but the OEM screw was removed by +Driver, and the screw that SNIPER attached together was a hexagonal type.
As for the contents of the product, there were only the product and two Stickers, and there was no particular instruction manual.
I am satisfied with the accuracy and other features without any problems.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPER Master cylinder guard installation
It's the perfect quick and easy dress-up.
If you match the color with other parts, it is even better.
View detail