Reviews
Fits: YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09 TRACER
MT-09 Tri-Racer SUNSTAR Chain&Sprocket replacement
I was thinking of replacing it after 3000km of driving.
ChainSprocketQuantity of SUNSTAR:Set was cheaper so I decided to replace it.
weight
Driven Sprocket 20-30% lighter than NORMAL
Driven Sprocket NORMAL is steel SUNSTAR is aluminum and 30-40% lighter than NORMAL
Chain weight Not much different from NORMAL
travelling sound
After the replacement, the jingling sound became Small in Large width.
degree of difficulty in exchanging
If you want to replace only Chain, you can do it with Chain Tool& or Shime Tool.
Sprocket replacement will be much more difficult.
Removing and installing the rear wheelKill
Plus
To remove the Driven Sprocket
Long Spinner Handlebar and 30mm Socket or
Torque wrench is also required
Summary
Expectations for improved fuel economy through weight reduction
I think the rear suspension works a little better now.
I wonder how durable the Driven Sprocket is since it is Aluminum.
Maybe next time I'll replace the Driven Sprocket and Chain at the same time.
View detail
Fits: HONDA CB1300SF, HONDA CB1300ST, HONDA CB1300SB
It's uniform and it looks good!
I used to change the Chain on a regular basis, but changing the Sprocket was very troublesome and I always put it off.
This time, the price is cheap, and it is possible to harden the undercarriage with SUNSTAR, and I tried to buy it with the feeling of a human pillar, but very, it was good.
The Sprocket is my favorite SUNSTAR, so I had no problem with it, but I've only ever used the Chain DID, and I was a little nervous about the Chain, which is also a new SUNSTAR product.
The product I received is visibly of the same high quality as Sprocket, and the installation is no different than any other chain.
The exchange itself was done smoothly and now I'm driving around, but there is no strange noise or strange feeling... I could recognize the Level of SUNSTAR again.
If you run another 20,000 km or if it gets worn out, you might want to change it to a Gold Chain.
I'm looking forward to seeing how long it lasts from now on.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z1000MK.2, KAWASAKI Z1-R
No hassle.
First of all, it is good to be able to purchase it without getting lost in this and that. Especially this time, I was saved because it was a product called for Conversion from 630. I think I would have made a mistake if I had thought of it myself. The chain is cut to the correct length so it is easy to install. View detail
SUNSTAR
It's a Psycho at an affordable price and I'm looking forward to installing it on my other motorcycles. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F
I bought this product as a pillar of humanity and it was very good!
[How is it used?
For GSX-S1000F
Used in town riding Main
Was the one you received as per Image?
Yes.
The Gold Plating was very good as per Image.
Was the installation difficult?
It's no different than any other Chain.
Front and rear Sprocket, Chain is Quantity:It's a set
Quantity if you are good at OEM Specifications:You don't have to worry about making a mistake with Set products.
How was your experience with it?
Tire rotation is noticeably lighter.
[Was there anything that disappointed you?
It is the same with other manufacturer's chain, but the new seal chain is painted with Chris and
You will have to fight against chain oil contamination for a while after the replacement.
Other items that would be helpful
When I say from the conclusion, I think that there is no problem even if I buy it except the person who uses it with Circuit.
To be honest, the cost is much better than other manufacturer's chain.
The size of the Crimp (the value to be checked after Crimping) and a simple replacement method are also included in the back of the package.
I drove about 1000km after the replacement, but the growth is not extremely fast.
I would buy from Repeat again in the future.
View detail
It's a bargain!
I was thinking of doing a chain exchange, and I wanted to get the Sprocket as well.:I bought the set
The Chain is also Cut, which is very kind.
good point
Cheaper than Chain, Sprocket, or buying them individually.
The chain is cut to fit the car model to reduce the workload.
It's SUNSTAR, so the quality is fine.
If you use a new one, it will run differently.
A bad point
There is none.
Chain is a very important part of the engine power transmission.
It's really easy to put everything together.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300ST
Very smooth turning SUNSTARChain&SprocketQuantity:Set
This time, since my mileage reached 50,000 km, I decided to buy SUNSTAR's Chain&SprocketQuantity:I bought the set
Installation went without a hitch and I did a test run and was very pleased with the light and quiet Fee Ring.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
SUNSTARChainQuantity:Set
[How is it used?
Touring
Was the one you received as per Image?
Satisfied
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
It's all there.
[Was there anything that disappointed you?
Satisfactory
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Satisfactory
[How is it used?
Touring
Was the one you received as per Image?
Satisfied
Was the installation difficult?
Easy
How was your experience with it?
Satisfied
[Included Parts:were they on?
It's all there.
[Was there anything that disappointed you?
Expected
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 TRACER, YAMAHA MT-09
ChainSprocketQuantity:Set Exchange
First ChainSprocket replacement for Quantity after purchasing MT-09:I bought it because I thought it was a reasonable set, and it was to be replaced at 32,000km, but at 11,000km I saw a helicopter on the Sprocket, so I had no choice but to replace it. Therefore, my evaluation became dissatisfied with the cost performance. The Sprocket that I replaced this time is Steel. I forgot to take a picture of the Sprocket before exchange. View detail
Fits: KAWASAKI NINJA250, KAWASAKI Z250
Replace it regularly!
Quantity:I was able to buy a set at a discount. By replacing it regularly, you can enjoy riding with peace of mind. View detail
Fits: HONDA SL230, HONDA XR230
Replacement for OEM.
Both the number of LINKs and the number of joints are as per OEM, and since it has been changed to Rivet Joint, it can be worked as per Service Manual. View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
It went from a rusty chain to a nice looking Gold.
The chain was rusting and the mileage was approaching 20,000 km, so I was thinking of replacing the chain and Sprocket.:I bought it because it was listed as a product in the set.
I asked the shop to replace and adjust it.
It has gone from rusty to not too bright Gold Chain and Sprocket and looks good.
The fact that it's only used in Touring and the same shape as the OEM's makes it difficult to drive.
I don't think there is any change, so the effect is ” I don't know ” I don't know.
Because I like the look of it, it was time to replace it.
If you have the budget to spare, you could try changing from OEM.
View detail
Fits: HONDA XR250 Motard
Sprocket and gold chain for each model
What made you decide to buy?
The Chain rusted significantly and I was thinking of buying only the Chain at first, but the Sprocket and ChainQuantity before and after:I bought it because I thought it would save me a lot of time because it was already cut in the set.
Was it difficult to install? What is the point or hang of the installation?
I was thinking DYI at first, but I asked for DYI for RearSprocket only and Shop for the rest.
The FrontSprocket, I found out later, was a type that could be easily removed by putting it in first gear and fixing it.
Crimp of Chain is not sure whether to buy the tool or pay for the labor. It was about the cheapest tool I've ever seen, so I asked for it.
How was your experience with it?
I am satisfied with the appearance of the Gold. I think the acceleration and entry of shifting are smoother.
Was the Instruction Manual easy to understand? Parts:Were you following?
No problem.
[Was there anything that disappointed you?
None
Do you have any wishes or improvements you would like to make for the Manufacturer?
Quantity dedicated to the model:The Set was easy to buy and affordable.
It would have been nice to have a choice of Sprocket's modified tooth count.
[Do you have any products to compare it to?
BL Black Scale Series Chain BL520X-XW with ChainSingle Body
View detail
Purchased during the Sale. Cheap!
I got a pretty good deal during the Sale.
I was surprised at how much lighter than I was expecting from the 630 Conversion.
The Rear Sprocket is also close to the OEM shape to keep a normal look.
This is the next ChainSprocket.
View detail
Fits: KAWASAKI ZEPHYR400X
Please note the difference between the photo and the real thing
In the picture, I think the Sprocket of Rear is Silver
I want to make the NORMAL-like appearance of the Large cutter, so I prefer the Black one if possible I bought it in silver to trust the quality of SUNSTAR, and it was a good choice for me It was In fact, the product I received, Rear sprocket, was Black
I was originally happy with the black ones, but the motorcycle parts are not good for appearance I think a lot of people are obsessed with it
I thought some people would be upset if the Black arrived expecting Silver
I think it's better to improve it to prevent Objection
The price will be more expensive to buy here and bring in labor, or buy it at the Shop for a fixed price and get a regular labor rate I think it's cheaper to compare the
I don't know the performance because I haven't used it, but it's a large hand-made manufacturer, so I trust it I think it can be done I'm giving it 3 stars for uncertainty
View detail
Fits: SUZUKI GSR250, SUZUKI GSX250R, SUZUKI GSR250F, SUZUKI GSR250S
I'm lighter
I replaced the front and rear Sprocket and Chain of the GSR250 with this product
I saw a rumor on the Net that the removal of the Driven Sprocket is pretty Large weird It's easy to use the 50cm SpinnerHandlebar while stepping on the rear brake I was able to remove it to
Sprocket on the Driven side was pretty heavy with the OEM being Steel I feel like the ride is lighter now that it is Aluminum
View detail
Fits: YAMAHA MT-07, YAMAHA XSR700, YAMAHA XSR700, YAMAHA MT-07
Quantity:Set for peace of mind
The front and rear Sprocket and Chain are the Quantity:It's a good thing that it's a set, so you don't have to worry about it as long as you don't make a mistake in choosing the right car
I like the look of Sprocket's Gold and Chain's Black gold!
View detail
Fits: KAWASAKI ZRX1200DAEG
Good!
I'm glad everything from shipping to everything was handled so quickly!
It was easy to choose the right car model!
I got a product I like very much!
We would love to have you back
View detail
Fits: KAWASAKI ZRX1200DAEG
Good!
I'm glad the product and everything from shipping to handling was so quick!
It was easy to choose the right model!
And I got it for less than anywhere else in the world for the price!
We would love to have you back
View detail