Reviews
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
StrikerRear Fender
It was exactly what I expected! View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
(before a negative form) (not) at all
The parenthesis is good and gives the tire house a new presence.
I am very satisfied with the quality of the product, which is much longer than the NORMAL, and is well made, as it is Handmade.
The 190 width can be installed without any interference.
View detail
Let's start with the mold.
Let's start with the mold.
Fenderless has a
This is it.
Less mud splashing to the rear. ??
View detail
StrikerInner fender
It was difficult to install because of the lack of a center stand. The exterior is also perfectly fixed. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100
I like Carbon!
Carbon is very good!
I have Active's BigRadiator on, and I found that the OEM Fender requires a cut, but this Fender does not require a cut.
It looks a little crooked when viewed from the front. Fine adjustment is needed.
View detail
Fits: YAMAHA XSR900 , YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09
If Twill Carbon can also be selected in this Style, it would be a perfect score.
The only regrettable point is that Striker is only available in plain weave, while many manufacturers offer a choice of twill or plain weave for exterior carbon parts.
I am satisfied with the design, the texture and the detail of the construction.
The Webig product page says it is 5 cm long, but it is actually about 19 cm long.
(Check with Striker's Home page before ordering)
This length is also good to make it Cover to the keyhole part of the Seat lock.
I also wanted to replace the OEM PeLePera Chain Cover.
View detail
Fits: KAWASAKI Z H2, KAWASAKI Z H2
Surprisingly easy
The product was quite solid.
I'm satisfied
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750
The small size fender decided on Mr. Striker's product as possible wanting. A pure fork can also be equipped. Wearing also only removes an original manufacturer's product. Although sporty carbon was also good, the black gel was painted in the
The small size fender decided on Mr. Striker's product as possible wanting.
A pure fork can also be equipped.
Wearing also only removes an original manufacturer's product.
Although sporty carbon was also good, the black gel was painted in the pure color.
A tire looks large!
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100
Simple and good
Simple is fine.
If possible, it would be better to use a clear finish for gloss and durability.
View detail
GOOD looking
Rear tire and rear suspension had to be removed for installation.
It can be installed without any modification.
The price is high, but I think it is a satisfactory product.
View detail
Overall, it's subtle.
The screw to fix the License Plate Light to the Bracket is not included.
The support was very good and fast.
I think the Design and texture of the product is good.
Unfortunately.
The gap to pass the wiring is large, and if you don't take measures, mud will come in considerably.
The Blinker Bracket interferes and makes it difficult to install the Number.
Since it is more expensive than other products, I wanted to make sure that the gaps were especially addressed.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100
[Color] Clear finish is terrible and has quality problems.
Overall [Color] The Clear layer is full of Wound and I thought I received a used product…
Various Materials:I bought a Carbon product and was surprised to see it in this condition for the first time, Large strange.
Since it seems to be a Wound that cannot be improved by a little polishing, it is possible to finish it steadily with Compound or [Color] I'll have to send it in for Clear paint.
I think it's obvious if you inspect the product when it's shipped…
LargeThis was a disappointing product.
View detail
The ABSMODEL on the ZZr1400 will come on just fine!
It's a ZZr1400ABS (2007 model) and it fits fine!
Clearance is perfect...I think it is very cool...I was looking for Long Type including Chain Cover, so I am very satisfied.
However, the motorcycle shop had a lot of trouble when installing it. It looks like they had to do a little bit of modification to widen the size of the hole.
The rear wheel also needs to be removed, so unless you are confident in your skills, I recommend leaving it to the PRO Shop ^ ^.
View detail
Fits: KAWASAKI Z H2, KAWASAKI Z H2
Japanese Vehicle Inspection Correspondence, so I don't have to do anything but …
good point
1.Japanese Vehicle Inspection Correspondence
2.You'll lose your long tail.
A bad point
1.License Plate Light is a Universal Product and requires OEM WiringCut&Wiring process.
2.The Bolt that attaches the number interferes with the Base and is not tightened up properly.
3.Number is difficult to install in the first place.
4.Level for vendors with instructions (People who can do this without looking at it from the start. No particular wiring-related explanation.)
5. (It's a Japanese Vehicle Inspection Correspondence, so I don't blame you.) The angle of the Number is on par with OEM.
View detail
Cool
It is easy to install, it only takes about an hour to install. Color, cool, and the angle is wrong. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
Overall, I'm satisfied with Large
The OEM Rear Fender is short and has a large gear suspension around the Because of the hollow space, it was easy to get the rear suspension and swing arm dirty even when it was not raining After struggling with CLEVERWOLF products to the end, I decided on the Striker! I found out at the time of temporary installation that there was no problem at all with Bolt On, no distortion or leveling problems I found a gap of about 1cm between the Swing Arm and the Swing Arm Cover, the gaps are completely filled in and I think this will reduce the dirt around the rear dramatically! View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100
Simple and durable design
Front fork, wheel, and brake are renewed
I also replaced the Fender that I was thinking of changing someday
I've been thinking for a while that if I was going to change it, it would be Striker
I compared it with other companies, but I chose Striker's
The design is simple and I like it
Clear seems to be working [Color] SmokeClear was painted
If you look closely, I like the Carbon look and feel
As for the installation, it's a pontoon, but as someone else mentioned
The Bolt that came with it was not long enough to be used
I use their Rear Fender and Reservoir tank cover
Whereas these two have the Striker letters concave
I was a little disappointed that the Front Fender was a sticker
View detail
Very good except prices
【What made you decide the purchase?】 I was thinking that it was for 14 R, but I saw the person attached to ZZr 1400 and thought that it was cool and decided
【How was it actually used?】 I thought about it because it was for 14R, but I am satisfied with a very solid build that is perfect without any interference.
【Was it difficult to install? (Hard parts case)】 It is a little troublesome to remove the arbitrary Rear wheel, but it can not be helped because the place to be attached is such a place, but it was able to be installed smoothly afterwards.
【Please tell me the point of installation and hang (in the case of Hard parts)】 If you do not want to wear any scratches, I think Bracket and other things that are likely to interfere are removed beforehand, then it is perfect if you do curing.
[Is there anything I was disappointed about?] It is not required.
【Hope for Manufacturer ? Please let me know if there are any improvement points] Required 55 Tire But Large I want you to be strong. I wish the price is a little cheaper ? ? ? I think.
【Have you compared items?】 I almost saw where I gave the same Parts.
View detail
Correct answer in Long!
【What made you decide the purchase?】 It is slightly longer than other companies' products
【How was it actually used?】 There is little mudfly under Seat
【Was it difficult to install? (Hard parts case)】 I asked for installation at the signboard of a certain Red Osan. It attached without processing and distortion!
【Please tell me the point of installation and hang (in the case of Hard parts)】 Do not do it yourself! (Lol)
[Is there anything I was disappointed about?] Not at all
【Hope for Manufacturer - Please tell me if there are any improvement points】 I feel like I can be as long as 5 cm longer
【Have you compared items?】 Magical racing others
View detail
Fits: YAMAHA XSR900 , YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09
Only the price is dissatisfied
MT09 I installed it in 2017 year. Fender Eliminator is essential so it was quite expensive but I am satisfied.
I think the precision of making is also high. There is a certain effect of mud splashes, but it is not as dramatic.
Because my wife does not notice at all, it is a world of self-satisfaction that can not be understood by those who are not interested.
View detail