Reviews
Fits: KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI NINJA1000
Your wish has come true.
I am a touring rider and OEM is fine for me, but I have a small body (short legs) and I don't feel comfortable with the OEM posture, so I wanted to change to Rear Sets to raise the footpeg height. I wanted to change to Rear Sets to increase the height of the footpeg.
I bought the Striker in a shiny black color, which I thought matched perfectly with Shinobi Sen's BlackRed.
After purchasing and installing the product, I was afraid of the change from the current posture at first, so I decided to use a back0mmUP10mm for the quantity.:Set, but later replaced it with UP 20mm.
I have only done some light driving, but when I raised the tank by 20mm, I felt a firm hold on the tank and my line of sight seemed to stabilize somewhat, giving me a sense of security. Also, I felt the difference between the OEM and the new brake. The touch of the brake does not have the strong spring pull sensation of the OEM, and the brake feels lighter from the moment you step on the brake until it takes effect.
The footpeg is fixed, so the footpeg may hit the hem when lowering the leg, but you will get used to it.
View detail
color coordination
I bought Red because Shinobi Sen is BlackRed in order to exchange Pedal end with Dress-up for installation of Rear Sets on Shinobi Sen.
Keep as a FOR REPLACEMENT when the RUBBER on the replaced end is worn out.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
Ideal for lightweight
Installed on 8BK-RG74J.
No loss of horsepower with regulated engines = can be converted by replacing the Exhaust System. but there was not much change at the JMCA, where the regulations are tighter.
In the 250cc class, the Large body only varies by 1 to 2 horsepower no matter which Exhaust System is selected, so this Exhaust System is recommended for weight reduction purposes.
As for the sound, the 8BK is almost 90db OEM, so you hardly notice any change in volume, but some parts have a thicker sound depending on the RPM.
In terms of sound quality, I think you would feel more change with Planus or WR's Slip-on Silencer.
The quality, however, the accuracy of the front pipe was quite poor, and it did not fit neither the Engine nor the Center pipe, so it had to be installed while bending it with Lever.
Although less expensive than other Full Exhaust Systems, it would have been nice to have a more accurate product.
When installing the Silencer, it is recommended to temporarily fix the Exhaust Band and Bracket and then install the Bracket on the body of the vehicle, as it is quite difficult to install the Exhaust Band if you follow the Instruction Manual.
Also, although not mentioned in the Instruction Manual, it was necessary to change the Wiring position of the O2 Sensor.
The OEM position is fixed in front of the Clutch cover, but once removed and placed through the rear.
Although it has a few drawbacks, it does not look like other people's and can be lightened to a large width, so I think it is recommended for people who are visually oriented.
View detail
Fits: KAWASAKI Z900, KAWASAKI Ninja1000SX, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Core guard with a good, understated claim!
Easy to install! Very good product in color and design! View detail
Recommendation for beginners!
This is the first time I have installed it myself. It took me about 2 to 2.5 hours. All the manufacturers did not have much in stock, and I wanted to install it right away, so I chose this product, which was in stock. I am satisfied with the appearance of the product, as I installed it just for its looks. The best thing about this Striker is that it can be installed in the same position as the OEM footpeg with 0mm height and 0mm back. I can adjust and shift it as much as I need. The probability of regretting the position after buying the Striker is reduced significantly! I think this will greatly reduce the probability of regretting how tight the position is after you buy the product. Also, I wish the Instruction Manual was more detailed. It is just a Parts List. It is more reasonable than anything else, and is a good recommendation for beginners! View detail
Very good
The texture and finish are both good and I am satisfied with the Large change.
Shift feel, which was a concern before the replacement, is just as good as OEM.
I wish the Position could be moved back a little more, but it is within the range of no problem.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZRX1200DAEG, KAWASAKI ZX-12R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1200, KAWASAKI ZZR1400, KAWASAKI NINJA1000SX, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Wow that's cool
It's cool
Note that ERing pliers make OEM removal easier.
Also, be careful not to apply the screw lock agent described in the Instruction Manual, otherwise it will loosen and there is a risk of it falling off.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Well thought out design
The position of the pedal is set at a reasonable amount of up for CB with low seat height, and it is recommended for multi usage. The Tandem Footpeg is detachable and Silencer Bracket is included, so it can be used as a single rider spec. The price is reasonable.
It is a little unsatisfactory that there is no heel guard and the parts for the Tandem Footpeg create a step and hit the Boots. (Guard made by myself) Shift Hedal may interfere with Link Rod. We are trying to find a way to remove the rattling of the pedal that causes this problem.
View detail
Looks GOOD??
It looks GOOD, though.
The sound is a little sad because it is a Japanese Vehicle Inspection Correspondence Exhaust System.
The bass is more pleasant than NORMAL because it has more bass.
Installation is also easy with the Instruction Manual.
It is unfortunate that the heel hits the exhaust pipe when driving.
View detail
Sticker tuning
It is good because it is attached to Striker parts. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
StrikerRear Fender
It was exactly what I expected! View detail
It is easy to install.
Installation was easy. I am very satisfied with the installation, but the parenthesis has improved a lot. It would be better if it were a little cheaper. View detail
Striker chain guard A+
Excellent quality, form and function. Slightly larger than stock, much better. Quick installation and looks 10x better. View detail
Repeat ?
Change from Gold to Red.
Rubbers have been replaced due to deterioration!
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110
Defensive Custom.
[How is it used?
The situation was triggered by a fall at the driving range and a bent Pedal. So, I bought it as a countermeasure against future falls. So that I can return to practice right away.
Was the one you received as per Image?
I asked a neighbor at the driving range how to countermeasure the problem and found the corresponding product at WeBig.
Was the installation difficult?
The bent pedal was fixed with a vise and hammer, and the end part was cut. Photo 4
There is a dish Bolt included, but I had to buy a separate Bolt because the Pedal side has to be dish-machined.
One thing I was careful about when I was processing the piece:I did not drill the holes on the edge of the pedal side, but rather shifted the holes. This was because I thought that drilling holes close to the edge would easily shred the edge of the Gold attribute when it tipped over and bent again.
How was your experience with it?
The end is a little closer, but I can use it without any particular discomfort. Above all, it gives me a sense of security that it is easy to take measures after a fall, since I should only need to replace the M6 Bolt.
View detail
Fitted to protect a stock exhaust.
I took a risk & chose the Standard length intermodal model (120mm) to protect my stock exhaust. It seems to offer enough clearance in the event of a tip over. I just hope I never find out for certain. In my opinion this is the best looking out of the silencer sliders available for the z900rs, hence partly why I chose it. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
Fits 8BK
From shipments after November 2023, 8BK I bought it because it became compatible with the type of vehicle. (7.89kg) Lighter weight (2.9kg) Gasket is KITACOGasketY-06 (XY-06) Used. The first installation had an exhaust leak, so we used liquid Gasket. The O2 Sensor was also troublesome. When installing the O2 Sensor, I did not follow the manual, but installed it after installing the O2 Sensor and assembling everything together and installing the Spring as well. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Ninja400
Nice bass
I own a Ninja 400 and the sound emitted from the OEM Exhaust System was so quiet that I felt something was missing. Therefore, I started to look for an exhaust system that has a heavy bass sound. After comparing the two systems on the video site, I was torn between BEET and Trickster's Slip-on Silencer. On the other hand, the Trickster, while well designed, did not seem to have as much bass as I expected. In the end, we chose Striker's Exhaust System because of its balance of design and bass.
The installation itself was easier than expected. However, the installation process of the Band was a little confusing, and I got oil on the Exhaust System part during the work. This is something you need to pay attention to.
When I actually used the system, the sound quality was exactly what I expected! It has a heavy bass and looks completely different from the OEMExhaust System.
View detail
More comfort with TouringSpec!
We recently installed their Special Footpeg Kit Type-2 on a Ninja 1000.
The products are here↓.
https://www.webike.net/sd/24203721/
At that time, I replaced the standard round footpeg with this flat footpeg and attached it.
I often go on long tours, so I thought it would be easy to keep my feet on it for long periods of time.
The sole of the foot is still stable because of the wide ground contact surface, and it feels as if it is firmly placed on the foot.
I am glad I replaced it.
Note that it is sold footpeg1pc.Rose, so Quantity:1 Set for 1 Vehicle includes Quantity:2pc. Set is that it is necessary!
I inadvertently ordered 1 pc. and had to place an additional order (due to shipping costs...), even though it is mentioned in the notes.
View detail
It was a perfect fit!
I installed it on my Universal Silencer and the size is perfect and I am Large satisfied. View detail