Reviews
For now Then it's antsy, but there's a lot to be concerned about
[Was there anything that disappointed you?
We knew from looking at the product images that the Helmet was going to be difficult to install
I have found the installation of the product to be very cautious and difficult, even when using it
More than that, when I actually installed the X-14
Helmet interfering with Billionfootpeg and Tandem Footpeg according to
I was very concerned about the scratches that could be made to the Helmet
It's a product that is installed in a way that makes it look like it could just slip out of your hand and fall off
The only thing that could damage the Helmet if you're not careful is the one thing that could damage it
I honestly don't think it's good for my mental health
I don't care if Helmet is scratched! If this is the case, it's not a problem
I don't think many people who buy a Motorcycle like the SC82 don't care about it Hmm..
To make it easier to install, there is a Helmet Anchor that is available on the market
As for the SC82, if you try to use the Helmet Anchor, there is no doubt that you will be able to use helmet hits the footpeg with a thud
I'm looking for ways to make effective use of this product
I don't really feel like using it as is
Do you have any wishes or improvements you would like to make for the Manufacturer?
I would like to see the shape of the HelmetBracket to make it easier to install
I want it to be possible to lock without having a keying device (Dial type, etc.)
I want you to consider the interference of the Helmet when it is actually installed
[Do you have any products to compare it to?
There is no other helmet holder for this type of car
There was no comparison, but after the installation of this product
We are considering a Dial-style Wire locketc
What made you decide to buy?
The helmet holder of the SC82 is located in the Tandem seat
If you install a single seat cowl, there will be no helmet holder It was
This was a problem for me when I was touring
This product was first sold as a Helmet Holder, so it was the first to be sold as a Helmet Holder
Purchased
How was your experience with it?
First impressions Very difficult to use It was
I'll make sure they don't steal it for now If you think it's just for the sake of it
My impression is that it's not a problem
The first thing I did was Neck to increase the number of Keys I had on hand
Since this is a Key less vehicle, it would be nice if you could make it a Dial type etc
It's a desire to be happy with less hassle
Also, the part of the Helmet that goes through the Bracket is very narrow
It is difficult to install the Helmet
You have to pull pretty hard on the Helmet side
I had a hard time reaching the lock part
Also, the rod that goes through the bracket will slide a little bit, and there will be a gap between them
I'm going to run a bracket through it
The moving side of the stick will open upward when viewed from the ground
It is difficult to hook and lock the HelmetBracket
I thought that if my hand slipped a bit, I might drop the Helmet
Was the installation difficult?
The installation itself was very easy
Remove the two bolts that are holding the Tandem Footpeg in place
The product is inserted between the body and the Tandem Footpeg and
Just tighten the two Bolts with the prescribed Torque
【Please tell me the installation point and hang】
To ensure that the Tandem Footpeg mounting angle is not Gap
First of all, Quantity:With the 2pc Bolts temporarily fixed
It's a good idea to tighten the Bolt while supporting the Tandem Footpeg at a normal angle
[Was the Instruction Manual easy to understand?
It wasn't a particularly helpful Instruction Manual, but it was
Since the installation method is more obvious than it looks in the first place, Parts
I didn't have to worry about it
If I had to choose, I'd say it's a vehicle-specific part
Multiple Patterns are listed in the Tightening Torque section
"A little longer" I felt that
[Included Parts:were they on?
The key cylinder body and the key for unlocking the door
It also includes an Instruction Manual, which is just a little bit of feeling, and a Sticker I did
[Others]
As for Matching to the body of the car, I think the design of the car is good because it doesn't look like it's floating and has a sense of unity I thought
If the key functional aspects of the product were excellent, I would have no complaints..
View detail
It goes on easily
The good thing is that it is easy to put on with Bolt On
The Bad Full face Shield as it attaches to the Right Side of the Motorcycle It's very difficult to remove the keyhole because the keyhole is hidden by the Helmet if you hang it in a direction where the keyhole doesn't hit the keyhole You should have a Helmet lock on the Left Side of your motorcycle As you can see from the pictures of the products, the Plate and the Plate that co-tightens the Bolt are It protrudes a little bit downward from Squidward and Nassert's exclusive Stay and Magical I don't think it's attached to the racing Stay, Nojima was also a dedicated Stay, but I'm not sure if I can change the shape I can't say for sure because I don't remember, maybe, but lol
View detail
I am satisfied with the accuracy and appearance of the product ..
This is probably due to the design of the Frame, but the quantity:Pair (for Left and Right) It is not a Penetrating type, so there is some concern about its strength in case of a fall
If it's just a standing mock-up, you'll probably only need to use SliderBody's Damage, but if you're driving If it falls over, there is a possibility that it will break from the Bolt's thinness
However, I chose this product because of its SMART look when installed
View detail
It's pretty light
This is a completely visually appealing product, much lighter and with more vibration than the OEMs, the GSX-R1000 I purchased this product to replace the Bar End of the Bar End in the United States, but I don't think I will be replacing it It is Also, the OEM Bolt is too long for you to install unless you have a short Bolt separately View detail
It looks normal
I installed it on the GSX-S1000 (no markings)
It's a Slider with just the right amount of protrusion and a good but not overly assertive feel to it, and it's a Slider that doesn't feel like it's too much of a good thing I think
I can only hope that I won't have to take care of you
View detail
No Cowl cracks
I stood on the Left Side with these Parts, but our Parts are Clutch lever, Side Stand, Footpeg, and Cowl with a degree of splattering I was able to drive myself home with only minor scratches
I'm glad I had it on because I probably would have called the Wrecker if I didn't have it on
I'm not sure if this is the only one that distorts the frame I would like to purchase Engine Guard and install it together with the Plug replacement
View detail
It looks nice.
DriveCruise's Can Engine Starter Motor tuning is severe I wanted to throw it out with
The Instruction Manual is too simple and confusing!
The position is not so different from Normal step, so it's easy to ride This is a dress-up product because it looks gorgeous
View detail
The product was exactly as I had Image
The device was installed on a 2017 MODEL S1000RR
I chose this product because of the Tandem Footpeg removal
The RearSection looks refreshed and I am satisfied with the appearance
View detail
It looks good
I removed the Tandem Footpeg because I don't plan to ride two people, and the screw holes are bothering me I bought this one because it was a good choice
Looks Refreshing and Parenthesis is nice
View detail
The EngineOil Filler Cap doesn't work!
The texture and sense of security are as expected of BabyFace For installation, it is better to remove part of the cowl It is not in the product description, but as shown in the product photo, the EngineOil Filler Cap You need to replace it with a shorter type because the EngineOil Filler Cap will not open if it is OEM Note that if the EngineOil Filler Cap is OEM, it won't open Please! I didn't realize it until after I installed everything View detail
It looks nice but the texture is bad
It is not VisualCustom but purchased for vibration reduction.
Since this product is lighter than OEM, the vibration gets Large, but it is not even anxious.
I have Short and Long, but Long does not seem obscurely so purchase Short.
I did not have anything to expect from the function side, so I feel like it is not possible and not possible.
The good point is that the color of Silver is just Beauty.
View detail
Quantity : Pair (for Left and Right) Wondering if.
This price was for selling One Side.
Motorcycle shop used for transportation, soon became scratches.
It's functional parts, so it can not be helped.
There is no Manual, ne. Well, there is no problem with this degree, but some people may be in trouble.
View detail
more than I thought
I am not used to OEM's Foldable footpeg so much, and I have replaced all the Motorcycle that I have connected so far with Rear Sets or fixed footpeg Pedal.
I do not know Foldable's Merit, but experience shows that with Fixed Type there are few Damage to the car body at the time of a fall, load transfer is also easy to do, so far we have replaced it with Fixed Type.
It is the main item of this issue, but it is thicker and shorter than I thought.
Knurl is my favorite GizaGiza condition, but I prefer it to be as thin as 10 mm longer.
View detail
A bit expensive
It was easy to install.
It is only a look of parts. It became a nice feeling.
I feel that it will come off regularly if I do not check tightening.
Single Item I want you to sell.
View detail
Design is ○
Design and Cost decide to purchase like.
Bolt head on the generator side was dissatisfied with protruding.
There is no play, so it stops firmly, so it is shallow counterbore?
View detail
Is not it good?
It's a Slider so it's not good nor bad.
It is certain that it is in the way.
Installation is simple.
Easy to remove.
The color is Black..
View detail
Peace of mind
Throttle Wire becomes useless than MASTER when rolling, so this shape is appreciated.
A little value is stretched but because elsewhere is not this shape it is a dedicated ground and there is no choice.
Mirror also arrives normally at STREET.
View detail
To use
Maybe only you, Helmet (ARAI RX7) It's too narrow to catch on to DRing so it's hard to do.
Helmet Lock It is useless if there is something like Assist, but it may weaken on crime prevention.
View detail
The correspondence of Manufacturer was good..
After purchase, I replaced it with Engine mount bolt and attached Aluminum Collar, but it was sometimes referred to as Engine Mount, and when I applied the same Torque, I oversized it. Looking closely at Aluminum Collar, Spec. Since it was an Aluminum Collar of a different width,. When I inquired to Manufacturer whether it changed, I was able to send regular parts free of charge because different parts were mixed. Extra fee It was saved because it did not take Gold, I think I did not notice it unless Oversize. I think that I could not protect the water pump if I used it as it was. It was a result. View detail
Easy and Parenthesis better Custom
I attached Gold to Deer Bell's RedFrame. I wonder if Gold is too flashy, I made Gold as a phrase I wondered if it was Black. Large It was correct (^O^) View detail