Reviews
I like Large
When it comes to Rear Sets, I have decided to use Babyface for my racing hooks. I have no doubt about the outstanding accuracy, appearance, and functionality. I have installed it on both of my cars. View detail
The finish is beautiful.
I bought this because I don't have a Tandem Footpeg and wanted a place to grab it when using the Roller stand.
The bolt head protrudes from the body and looks bad, so we replaced it with a Titanium bolt with a low head and changed the length of the helmet holder to fit the body.
The material is aluminum, but it is firm enough to be used as an anchor point for tie-downs, and depending on the exhaust bracket, it can also be used on the right side.
It is a good product because the finish is so beautiful that it can be used for dress-up.
View detail
Balance is good!
I found this product because I wanted to refresh the Tandem Footpeg when it was removed. I have no experience with circuits at the moment, so it is just for looks, but it can be used with KIJIMA's helmet holder as well, so I like the way it fits together very nicely. View detail
BABYFACERacing hook is the best!
It is one of the ITEMS you must use when you buy a Motorcycle!
Personally, it is as much an iron plate part as the Exhaust System replacement.
The body of the car looks tighter and the color can be matched with the Rear Sets of the same Manufacturer, so that the Rear Sets and Quantity can be matched every time.:It is attached with Set.
This time cbr600rr (2bl-pc40) I installed it with a-tech's Rear brake tank guard and both were great.
View detail
Changed from the same Parts (Black)
[How is it used?
Used for dress-up and in-vehicle use
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy installation BoltQuantity:2pcs only (for those who have removed Tandem Footpeg)
How was your experience with it?
It has more dress-up elements than practical use, but it is good for one point.
[Included Parts:were they on?
BoltQuantity:2pc
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation Point or hang For those who have removed the Tandem Footpeg/No Instruction Manual/Ease of understanding ◎/Cautions None/Items to be purchased together None/Opinions and requests to the Manufacturer I want Silver anodized color, please!
View detail
Opposite side of Silencer bracket
Since the Tandem Footpeg to which the Silencer was attached was replaced with a Bracket, it was decided to remove the opposite footpeg for balance.
Also, Rear Sets were recently changed to Babyface LargeHanGold, so the same color is used for this product.
Installation is not a lost cause.
Of course, Tie Down austerity seems to be bearable.
View detail
Lightweight and Dressup
I installed the footpeg for the purpose of dressup after the removal of the footpeg, but unfortunately, I could not see the engraving, which is the most important part.
Other than that, I have no complaints.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Divert to other cars
Sprocket cover on Z1000
Actually, the 900RS version is on its way.
I don't see it in the lineup for Z1000 because of its unpopularity.
The Z900 is based on the Z1000 Engine.
The Z900RS, which is based on the Z900, would have the same dimensions.
In other words, the Crankcase should be the same for Z1000, Z900 and Z900RS!
And when I tried to match it, I found that it was EXACTLY!
You did it!
Tightening was Torque managed using Torque wrench to no avail.
As for functionality, the Sprocket cover has a Shift holder, which might improve the Shift feeling.
And when I put it on, Wiring, which was hidden by OEMCover, was fully exposed, so I hid Wiring with Tube.
It's hard to see on the STAND side and nobody sees it, but it's self-satisfying.
This part of the hobby thing is the Large thing, isn't it?
It's a functional Part, but when you clean the Chain.
I like the fact that the FrontSprocket part, which was covered and couldn't be flushed with cleaning agent, can now be flushed directly.
Z1000 BaseEngine is ZX9R
In other words, the Sprocket cover for 9R should be able to be installed.
It's nice to be able to divert from a popular car model.
View detail
For Dress-up
I removed the Tandem Footpeg to make a Single Seat, so I installed this one. I have read some other reviews that the holes are gapped, but this was not the case with mine. View detail
Change in appearance.
It is a self-satisfied part with no functional significance. View detail
BABYFACE:Babyface Racing hook
I have installed this product due to the elimination of the Tandem step. It is not intended for use, but for one point customization. View detail
To hide the Tandem Footpeg when it is removed (installed on a '24 model).
When we purchased a '24 ZX-6R, we decided to install a single seat cover and remove the tandem footpeg to give it a race ish look and feel. The Left SideTandem FootpegBracket was installed to cover the bolt holes after the removal of the bracket.
Since we don't run circuits with the Transporter, we plan to use it as a Hook to secure the Belt when wearing the SeatBack, which looks and feels Large.
No conformity to the 24 MODEL is available, but we were able to install it without any problems.
It can also be used in combination with a helmet holder.
View detail
Functional without sacrificing appearance
Purchased for blindfold after removing Tandem Footpeg
It will also come in handy when loading the Transporter.
View detail
Poached!
Installed at the base of the Grab Bar on a Z900RS.
The Grab Bar itself is Black, so the Gold color is a nice touch with Pinpoint ?. (*?Please note that the) lucifer
Shorter and slimmer than OEMHook. It's nice.
By the way, I have Babyface's Stand HookV-type on my Z9, and here I have Black-colored SocketFlange on my Z9.
It is good to create a prominent Custom feel with LargeHanGold, but I am satisfied with the Custom that you have to look closely to see. (* 'Ω `*)
View detail
High quality product
About quality and texture Bra kvalitet About the feeling of use Products to buy together Difficulty of installationAbout quality and texture Lett og instalere About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Gode fraktpriser og godt pakket Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Convenient for fixing
Convenient to fix with Tie Down when loading Touring net or TRANbo. No overhang is a concern.
It is also possible to continue using Tandem Footpeg without any problems.
However, the screws used for fixing (OEM diversion) are full of locks and are difficult to remove. Screw locks are necessary because they tend to loosen when reinstalled.
View detail
Tandem Footpeg was in the way.
[How is it used?
The Tandem Footpeg was removed because it often interfered with the heel of the shoe and felt in the way.
Installed because it would not be possible to secure the cargo rack or Tie DownHook if it was left removed.
Was the one you received as per Image?
The texture is good. The area is BabyfaceQuality.
Was the installation difficult?
It is very easy to remove the footpeg and squeeze it with the supplied Bolt.
The Helmet holder can be installed with it attached or removed, of course.
The Bolt that came with it was not particularly accurate or anything.
How was your experience with it?
Anodized fallout is possible due to some slippage, but it is not a problem for functionality.
View detail
AnchorPoint
The Tandem Footpeg was removed and installed since it is often mounted in the vehicle.
I am using it with KIJIMA's helmet holder, but I think I can manage to hang the belt on it.
The instruction manual says to use it only as an aid to deform it if it is pulled or tugged hard, which is not a problem because it is aluminum.
Dress-up parts.
The strength will be verified by using it in the future.
View detail
When applying Transporter or Touring net
CircuitTrapping when Transporter is used for movement and
Touring net, for example.
I put this on when I remove my Tandem Footpeg.
Can be used together as shown in the photo
View detail
mc51 Racing hook
I bought it because I go to Circuit a lot and often have to Transporter, so I realized that I don't have many Points to put Tie DownHook on.
I recommend this product because the texture and rigidity are very good, beautifully anodized and easy to use.
I think it will be more useful for those who often go to Circuit than those who do city driving or Touring.
View detail