Reviews
BABYFACERacing hook installation
Installed for use as a loading hook.
Installation can be done by simply removing the Tandem FootpegBracket.
Left Side is to use KIJIMA's Helmet holder.
The Helmet Holder Bracket is inserted under the provided Aluminum Collar, and then the Racing Hook is installed under the Aluminum Collar.
Even so, the HolderBracket and the Racing hookBody still interfere slightly, so the HolderBracket was shaved a little and installed.
In addition, the Left SideMounting Bolt was changed from the supplied 30mm to a 35mm due to the Helmet holder being sandwiched between the two.
View detail
Balance is good!
I found this product because I wanted to refresh the Tandem Footpeg when it was removed. I have no experience with circuits at the moment, so it is just for looks, but it can be used with KIJIMA's helmet holder as well, so I like the way it fits together very nicely. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Divert to other cars
Sprocket cover on Z1000
Actually, the 900RS version is on its way.
I don't see it in the lineup for Z1000 because of its unpopularity.
The Z900 is based on the Z1000 Engine.
The Z900RS, which is based on the Z900, would have the same dimensions.
In other words, the Crankcase should be the same for Z1000, Z900 and Z900RS!
And when I tried to match it, I found that it was EXACTLY!
You did it!
Tightening was Torque managed using Torque wrench to no avail.
As for functionality, the Sprocket cover has a Shift holder, which might improve the Shift feeling.
And when I put it on, Wiring, which was hidden by OEMCover, was fully exposed, so I hid Wiring with Tube.
It's hard to see on the STAND side and nobody sees it, but it's self-satisfying.
This part of the hobby thing is the Large thing, isn't it?
It's a functional Part, but when you clean the Chain.
I like the fact that the FrontSprocket part, which was covered and couldn't be flushed with cleaning agent, can now be flushed directly.
Z1000 BaseEngine is ZX9R
In other words, the Sprocket cover for 9R should be able to be installed.
It's nice to be able to divert from a popular car model.
View detail
Tandem Footpeg was in the way.
[How is it used?
The Tandem Footpeg was removed because it often interfered with the heel of the shoe and felt in the way.
Installed because it would not be possible to secure the cargo rack or Tie DownHook if it was left removed.
Was the one you received as per Image?
The texture is good. The area is BabyfaceQuality.
Was the installation difficult?
It is very easy to remove the footpeg and squeeze it with the supplied Bolt.
The Helmet holder can be installed with it attached or removed, of course.
The Bolt that came with it was not particularly accurate or anything.
How was your experience with it?
Anodized fallout is possible due to some slippage, but it is not a problem for functionality.
View detail
For decoration
I put it on as a decoration, even though I don't load it with luggage. View detail
perfectly
I bought this to fix to my vehicle when I go to Circuit, it is higher than the Footpeg Bracket so it stays in place. View detail
I tried to put it on, but...
If the tank can be removed, it can be installed. However, the tank cover makes it almost invisible (lol). View detail
Good for dress-up
Installation is done by screwing Screws to Quantity:I bought it as a dress-up. View detail
Lovely to load!
I had removed the Tandem Footpeg from my Circuit ninja to make it lighter. However, I was told that the Frame might rust from the inside if left in place, so I had to purchase one. The color and shape are very suitable for me as I am wearing Babyface Rear Sets as well. View detail
Installed on New Model GSX1300R HAYABUSA
Honestly, it's the look! But now I can clean it from the crevices.
It is a pity that Anodized has a very strong Orange color and WoodStock has a different color, but as a whole, it is a cohesive unit.
The work is done by simply removing the screws from the LeftUnder Cover and Side cowlCenter and lifting the nails.
View detail
Parenthesis goodness and functionality!
I removed the Tandem Footpeg and installed it.
Easy to fix on a loaded car and looks great Parenthesis!
View detail
Used with Exhaust SystemMounting Bolt
Used as Bolt for Exhaust System installation.
The design is good and the Manufacturer logo is satisfactory as Accent.
I thought it was kind of nice to be able to choose the length and diameter of the bolt.
View detail
Better cutting accuracy and improved appearance
[How is it used?
KAWASAKI Kawasaki:Exchange from sub footpeg with purchase of Single seat cover
Was the one you received as per Image?
I bought it with trust because I had set Rear Sets to Baby Face beforehand.
I'm very happy with the product I received, it's well made and large.
Was the installation difficult?
It's a simple job to remove and replace the screw.
How was your experience with it?
No special feature because it does not improve the performance of Motorcycle.
Is it just a little lighter?
[Included Parts:were they on?
Special Screw and Sticker are included.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Quantity of One Side:Because it is a set, if you want to attach it to Both Sides, you need to buy two.
View detail
Introduced by Dress-upMain
Since there is no Tandem schedule, it is introduced mainly for Dress-up purpose.
I like the texture of the Gold, and the footpeg is also Babyface, so I like the sense of unity.
The rear area is now SMART and has a so-called Race ish feel.
From a practical point of view, it is for fixing when transporting, but since it doesn't transporter, I don't get any benefit from it...
Because the Tandem Footpeg interferes at the time of the pre-road adjustment of Rear suspension, the pre-road adjustment might have become easy. But I don't adjust it so often.
Nevertheless, the color is good, it seems to be strong, and it is not cheap, and I am highly satisfied with this product.
View detail
Satisfied?
Quantity:2pc. I bought the first set! 。 I wanted to buy the other side because I was happy to install the 1pc. product.
I am very satisfied with the quality and appearance.
View detail
Good, huh?
In this case, Quantity:2pc. This is my second Set purchase.
The first time, I was satisfied with the appearance of the product and after installation, I was satisfied with the product, so I bought it a second time! 。
Large Satisfied
View detail
As dress-up parts
There is no plan to Tandem, and I bought it including Dress-up because Loading Hook can be corresponded in another place.
I was in such a hurry to buy it that I forgot about the product details and the fact that only one side was enclosed in one of the reviews;;
Now, as for the product, I thought it was the quality and precision that I would expect from Large Hand Manufacturer.
The contents are simple, including the product, Sticker, Instruction Manual, and two mounting bolts.
Installation was easy, just replace the two bolts as you see them. 。 I have put the OEM one and the Bolt of this product on the image for comparison for your reference.
As for the effect, it may become a little light, but I do not understand it to myself of the amateur, but the appearance became clear obviously. Especially when I look down from the top of the car to the side stand side, I feel it.
The only thing is that the color of the frame of the car body is different from the color of the matte black, so if you replace the footpegs together, you may get a sense of unity. ..... I'm not sure if this is a good idea or not.
View detail
Frame cap installation
Easy to dress-up by attaching to the frame.
I chose Silver because it is Ebony color, but Black or Gold might be good.
View detail
Helmet Holder changes
It's a cbr1000rr sp so it doesn't have the Tandem Footpeg screw mount and I had to machine it. The only hassle is that it's easy to do with a specialized tool. I like it because it is casual and pahomance. View detail
Transporter essentials!
I was wondering where I could hang the Tie DownHook on my motorcycle when I loaded it onto the Transporter, and it holds it in place and gives me peace of mind.
Since the Anchor Point is also at the top of the vehicle, it can be pulled firmly from top to bottom, making it more stable.
I think it's a good design and matches with the body of the car, giving it a one point custom look.
View detail