Reviews
baby baby
I chose it after much consideration with other front axle protectors, and I am very satisfied.
First of all, the price is very reasonable. Also, the product quality is excellent. If you buy
Recommended. I believe that the baby face will protect the 23-year-old Katana well. rear axle
It would be nice if a protector came out, but I couldn't find it no matter how much I searched ----------------------------------------- ----------------- I was worried about other front axle protectors and chose. First of all, the price is very reasonable. In addition, the merchandise is also excellent. If you buy it Recommended. I believe that I will keep Katana well with my baby's face. Rear axle I wish I could come out as a protek tap, but no matter how much I found it. Powered by Google Translator
View detail
I even bought Hexagonal.
Installation is easy, but in the case of RR-R
Tighten the Frame Slider mounting bolt to 64Nm.
If not, it will affect the running of the car. Therefore, we purchased a Long Hexagon socket separately and tightened it with a torque wrench.
View detail
Used for JC92Front
I installed this on a Grom JC92Front. The Right Side Axle Nut of the JC92 is a UNut, so it is very tight. I couldn't turn it with a normal ratchet handlebar, so I extended the Spinner Handlebar + handle with a Pipe.
The Right SideAxle Nut has a 19mm socket, but I was a little worried.
View detail
Made by trusted Babyface
Product Name
BABYFACE Babyface Engine slider
Item Number
006-SY028E
Vehicles
MT-09 (Year:2021 Model:8BL-RN69J)
Number of man-hours
About 1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers
Why did you choose this product?
We chose this product because we wanted to anticipate the motorcycle's fall in advance and limit the damage to the smallest possible amount. Also, I thought that Babyface would have a repaired product, so I decided to purchase it. I can fall over with no problem. (I never want to do that, but...). It is a good luck charm.
Was the one you received as per Image?
It was just like the Image. It was not as noticeable as I expected.
Was the installation difficult?
It was hard to tell which part Screw is for. Please refer to the Instruction Manual and work with the screw size and length. If you lick it, it will be Large strange engine rotation.
How was your experience with it?
I hope I won't have to grab it again, and I trust you will protect Engine.
[Included Parts:were they on?
None in particular, Instruction Manual is included.
[Was there anything that disappointed you?
I hope the price is high and the performance is good when you use it. I just wish it was a little cheaper.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It was not long enough and could not be installed.
Installation is easy and anyone should be able to install it easily.
The one I purchased this time could not be installed due to insufficient length.
View detail
BabyfaceFrame Slider
This was purchased because it would not catch and slide if it did.
Well, I haven't experienced the effect and don't want to, so the effect section of the evaluation is a rating to look at.
I knew the Gold amount was too high and SliderBracket (bar) The SliderBody is attached to the body and a screw is cut on it, so the SliderBody is turned around and attached to the body, and then the screw is used to stop the body from turning around. But when I tightened the screw at any position without tightening the SliderBody to the end, it was loose.
View detail
Spartan increase/increase!
[How is it used?
Appearance change and Damage reduction.
Was the one you received as per Image?
more than expected
Was the installation difficult?
It is easy if you have the right tools in place to do the work.
How was your experience with it?
Satisfactory and good
[Included Parts:were they on?
no problem
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
be well-matched
I purchased this product when I took delivery of my gsx-s1000gt. The installation was done by the dealer, so I don't know how difficult it was, but I felt that I could probably do it by myself without any difficulty. However, the manager of the store said that there are many people who make mistakes in screw tightening, so please leave it to us.
The installation of this product is, in a word, a good fit for this motorcycle. It seems to protect the cowling from standing chipping. However, I would like to ride it carefully so as not to drown standing up.
The angle may be a little bad, but here is a photo of the installed condition.
View detail
Babyface Frame Slider
The standard Frame Slider is installed.
It is not as uncomfortable as I expected.
BMW is ridiculously overpriced for Cowl, so it's safer to put it on.
View detail
Babyface Engine slider
I bought the BodyStyle Under Cowl because the KawasakiOEMSlider that I had been wearing for some time would not stick to it after I installed it.
I had installed the same manufacturer's Slider on my previous S1000RR. Fortunately, I have not had to use the Slider yet, but I think the shape is good and not too assertive.
View detail
Slider
The Engine could be installed as is without lowering.
Torque management is a safe bet.
Slider. slipped and missed Damage….
I hope it will not be useful!
View detail
Even an amateur could install it easily.
[How is it used?
To prevent damage to Cowl in the event of a fall?
Was the one you received as per Image?
Mount section was solid.
Was the installation difficult?
The product installation itself is easy, with the only difficulty being the removal and installation of the Cowl.
How was your experience with it?
It's for just in case, so it's not active yet.
[Included Parts:were they on?
It was all there, and Sticker was included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
It was a Large-size tool that Hexagon did not have in its arsenal.
The Instruction Manual only showed pictures of the assembly of the Parts, so I referred to the installation position by looking at the pictures of the installation examples on the Home page.
View detail
good!
It was easy to install. View detail
I put it on as a cane before I fall.
I had used it on another car before and it protected me well when I crashed on the Circuit, so I put it on this car as well (the slit in the middle cracked because it protected the car body so well...) View detail
Fits: DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI StreetFighterV2
Simple and inexpensive.
I thought I had researched and ordered it, but the PanigaleV4S was not among the compatible models. Sweat
Item number:006-AD007
The length of the Long Bolt was sufficient, so we cut the transparent tube of the Long Bolt by 1 cm to match the length.
It can only be installed if you have a 10mm deep socket.
I am surprised that neither the product introduction nor the Review mentions SheepSocket.
I went to Astro to buy one.
Single Item:about ?,300, Quantity:It is about 2500 for a set.
View detail
As Axle Slider
As Axle Slider,
I purchased it in the hope that I could use it as a Stand Hook.
It is strictly as Stand Hook.
Maybe JTrip's Hook receiver would work.
It is not easy to find a receptacle of this size, and Rear
There is no point in using it around.
It looks good, it will be One point.
View detail
if you don't mind protruding
It is much cheaper than foreign products, and I am grateful that they make these vehicles even though they are not available in large numbers.
You will need Torque, so you may have to spend extra on that, but while you're at it, why not use the Quantity:I prepared it with Set, myself.
The length of Bolt is a little bit complicated, so it is better to check it with Scale.
View detail
Simple is good.
I used to use Axle Cup, but I decided to use Slider because it is a "Chain". It is smaller than I expected, but it looks OEM.
I think it is also the strongest in terms of cosmetics.
View detail
Slider
Installation was very easy. View detail
I'm not particularly indebted to you.
I put it on because it's kind of a standard product, but it could have gone either way.
It would be self-satisfying because normal people don't look at these places.
MotorcycleParts, as you might feel if you're also tinkering with cars.
There are a lot of smalls and not as Impact as a car.
For example, Squid Ring.
View detail