Reviews
Highly satisfactory.
Yamaha's M16 had been out of stock for a long time, but I found a Koken M16→M6 conversion adapter on Yahoo Auctions, so I bought this M6 one that was available.
Since it is a Large Thin Motorcycle with a vibration, I was momentarily torn between Stainless Steel and Black, but I am glad I went with Black.
The other motorcycle is also a Babyface short bar end, and I love the design, texture, etc. of this one.
View detail
Satisfied
I was worried about Black, but I bought Gold.
I like the high quality construction with Knurl finish.
It is a little more expensive than other companies' Bar Ends, but I am satisfied that it was well worth it.
View detail
visual improvement over the oem bar ends.
These are straight forward to fit, although I noticed a little gap(a couple mm at most) between the bar-end & the oem grips. These feel a little lighter in the hand than the oem bar-ends (sorry I didn't weigh them to compare) but it dosent seem to cause any noticeable issues whatsoever. Overall, a great looking product, I'm happy with them. View detail
New ModelXSR900 Bar end mirror removal measures
Items for the problem of what to do with the Bar End after removing the OEM bar end mirror of the New Model XSR900.
It is specially designed for this purpose, so it can be installed without any worries. (The gap between the Grip and the Bar End will be filled.)
It is expensive, but the quality is very high because of the high price, so I give it 5 stars.
View detail
It's all about Stylish!
You can buy similar colored Bar End products from other companies at parts shops, but they look somewhat cheap. For example, what if you try to match them with baby face's Lever Guard? The other company's product would definitely look out of place.
I don't like too large size, so this is the only one I can choose.
View detail
For those who want to remove OEMBar end mirror
No wobble at all as it is a complete Screw fit! View detail
We chose Black to match the car body.
Babyface is the quintessential babyface.
The texture is too good.
Crimp is also working well.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA NC700S, HONDA CBR250R, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100EX, HONDA CB750, HONDA CB1000R, HONDA CB1100, HONDA CB400SB, HONDA CB125R, HONDA CB250R, HONDA CB400SF, HONDA VTR1000 SP1, HONDA VTR1000 SP2
I wanted the look of the Bar End and to install a BabyFace Lever Guard!
Let's start with the appearance.
I think the workmanship is beautiful, as it is BabyFace's product.
The problem is installation.
The CBR600RR installed this time had the OEM weight removed from the handlebar, and the Inner Weight Spec. was installed. This work is necessary for HONDA cars with OEM Weight. It was troublesome to do this work. However, if you are a person who does your own maintenance, it is possible to install the OEMWeight by yourself.
Once the OEM weight is removed, the rest is the same as installing an ordinary external weight.
I was concerned about how the vibration transmitted to my hand would be due to the change from OEM weight to BabyFace's weight, but I was relieved to find that it was the same as with the OEM weight when I ran the car.
View detail
Exclusive for XSR900 (2022~)
I am very thankful that I was able to solve the problem I had when I removed the bar end mirror (if you use the bar end from another car, there will be a large gap between the grip and the bar end, which is not cool). View detail
It's perfect!
The design is cool, too, with the inner Screw and Exactly of the Bar End of the XSR900!
Installation is easy
If you want …. If it were a little heavier, it would also serve as a weight, which would be great. (Lol)
View detail
Anyway, it's cool!
Anyway, the texture is good, cool and Large satisfied!
I highly recommend it!
View detail
Bar End is the only choice.
[How is it used?
Introduction of Babyface's Bar End to the Touring and Street Riding Main XJR1300C.
I have been using it for a long time, but now that I have replaced the handlebar, it is necessary to use the M8 BoltSpec.
I bought a new M8Spec. because I could no longer install it.
Incidentally, the Handlebar we are using is DAYTONA's RCM concept Handlebar.
This Handlebar has a Built-in Type Inner Weight, and the M8 Tap is cut off.
So this product can be popped right in.
Was the one you received as per Image?
This is about the fourth one of what I've seen, so I already know all the details.
Size, texture, and design are all top notch.
The most important thing is the good design. It's not weirdly decorated and it's not tacky.
Was the installation difficult?
It is easy to use, just tighten with hex. There is no need to hesitate.
Incidentally, M6Size Bolt cannot be used with M6Spec. and M6 Bolt cannot be used with M8Spec.
The size of the Large hole and the size of the with Stages hole are different to begin with.
How was your experience with it?
The thickness of 30Φ makes it comfortable to hold the Grip and feel a little on your finger.
It is an excellent Bar End because it can also be gripped on the moderately small finger side.
Frankly, no other Bar End is an option.
[Included Parts:were they on?
Comes with mounting Bolt and Spacer.
Spacer must be installed on the Throttle side.
Otherwise, if the Grip interferes with the Bar End, the Throttle may not return.
[Was there anything that disappointed you?
Nothing in particular! The only drawback is the long delivery time if not in stock!
View detail
safety devices
I appreciate that the mounting angle can be adjusted to set the position to my preference. View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP2, HONDA VTR1000 SP1, HONDA VTR250, HONDA VFR800, HONDA VFR750R, HONDA RVF400, HONDA NC750, HONDA NC700X, HONDA NC700S, HONDA GB350S, HONDA CBR1000RR-R SP, HONDA CBR1000RR-R, HONDA CBR1000RR, HONDA CBR929RR, HONDA CBR954RR, HONDA CB650R, HONDA CB650F
sneaking claim
CBR600RR (PC40) I put it on the
The product is Babyface, so it is a quality product.
I don't think there is any problem at all.
I bought the Red color this summer and it is not gaudy.
It's a solid claim, and I like it very much.
I am.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP2, HONDA VTR1000 SP1, HONDA VTR250, HONDA VFR800, HONDA VFR750R, HONDA RVF400, HONDA NC750, HONDA NC700X, HONDA NC700S, HONDA GB350S, HONDA CBR1000RR-R SP, HONDA CBR1000RR-R, HONDA CBR1000RR, HONDA CBR929RR, HONDA CBR954RR, HONDA CB650R, HONDA CB650F
Looks great!!!
CBR600RR (PC40) I bought it for my wife and children.
The quality aspect is as expected of Babyface.
The make etc. has no problems and looks good.
Next up is the Lever Guard from the same Babyface.
I would like to purchase.
View detail
Simple is Best
[How is it used?
Touring
Was the one you received as per Image?
Much lighter than expected
How was your experience with it?
I was using Heavy weight, but as far as vibration, no change! I wonder if the vibration was low to begin with, the Heavy weight wasn't necessary...
[Points to note]
I think the 21Hayabusa OEM end bar screws are M12, 750? P:1.25, but you need to purchase M12, 400? P:1.25 as they will not fit! (In the case of Long)
How did it compare to other products?
As a matter of taste ... and as a product, of course, no problem!
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It takes Power to remove the OEM Screws!
View detail
Exactly for the first time Custom
Very beautifully finished Bar End.
The weight and quality are all above the price.
View detail
race ish for vibration control!!!!!!!!!!!!!!!!!!!!!!!!!!!
Stainless SteelCut-out at Handlebar End is installed.
After consulting with Shop, we left the work to them.
According to Engineer. The glue on the OEM bar end of the kawasaki was so sticky that replacing it was always Large and odd." The stainless steel cut-outs have a solid weight and are perfectly functional as a vibration countermeasure.
It is also impressive as one point around the Handlebar.
And kawasaki... Adaptation M8-Concave (KAWASAKI) Please note that the
View detail
Excellent
Perfect product, cheaper than direct with the manufacturer especially with no import tax from Japan to the UK, the product is exactly as expected, very high quality and delivery in a matter of days! Dampened the vibrations a lot more than oem honda on my cb650r 2021 View detail
The inconspicuous Custom is like a Large person.
It is indeed babyface.
I like the texture.
The Crimp inside is also very helpful as it supports various Handlebars.
View detail