Reviews
Parenthesis OK
I installed it on my YZF-R46. Installation was easy and took about 5 minutes. I am satisfied with the quality. It looks like a race ish. View detail
Perfect presence b
[How is it used?
Whenever you grip the Handlebar, you will see it.
Was the one you received as per Image?
Gold color is very good. The texture is wonderful. As expected from Babyfe.
Was the installation difficult?
Anyone with tools can put it on.
How was your experience with it?
It does not have a Weight in it, so it is not a good vibration protection. It is completely visible and has a semi-absent presence.
[Included Parts:were they on?
Bolt、Sticker
[Was there anything that disappointed you?
Nothing in particular. Not cheap, but satisfactory.
Other items that would be helpful
Point and hang of installation
Bolt should be tightened while holding down the grip end, since the bolt will spin out when tightened.
[ITEMS TO BUY TOGETHER
You can replace the Grip anyway.
View detail
Very Beauty
Babyface's distinctive dark gold color makes it a very beautiful Bar End.
For KAWASAKI concave Type, so it will not be along the Exactly and Grip edge, but it is acceptable.
I wanted to make the handlebar width as short as possible, so I chose to make it very short, but the gold stands out very well and makes a good accent.
View detail
Wow that's cool
The OEM Bar End was scraped off due to a fall, so I bought this for replacement.
I hesitated between the Heavy weight type Bar End which suppresses the vibration of the Handlebar, and Babyface's standard Bar End because it does not bother me in circuit riding.
Installation is simple, just pull out the OEM and replace it.
The inner diameter of the Bar EndBody is designed to expand as the bolt is tightened.
In addition, the OEM was bent inside when it fell over, and it was difficult to pull it out.
I was able to remove it by hitting it vertically with a plastic hammer.
This product has no BALI and the texture is very high quality and good. In addition, the official one is checked when the Bar End is required by the CircuitRegulation, but the gold color stands out and you can tell at a glance that it has a Bar End, which is a relief.
In addition, the seat of the Bolt is designed to be deep enough to prevent damage to the Bolt's head if it is scraped off during a fall.
The shallow Bar End is difficult to remove because the entire head of the bolt is shaved off, but I thought it was well thought out.
View detail
Large I'm satisfied.
When I replaced the Handlebar with a black one, I installed it as well.
It is very easy to install and it is more fearless than the previous long Silver one.
View detail
The shine and heft of Stainless Steel
The weight of the Stainless Steel is not as heavy as the Aluminum, and I think it reduces the vibration of the Grom a bit. View detail
Lever GuardMirror
I've wanted to try this product since I saw it.
In fact, I was skeptical until I saw the actual product, but when I saw the thing, I was convinced I could do it.
So I made Lever GuardMirror by combining Bar end mirror which I had at hand.
The good thing is that the width is narrower than with the Bar end mirror and the mirror is no longer in the way.
As usual, the vibration makes it invisible, but I think it looks and feels better than the Bar end mirror did.
The production Image is the Bar end mirror of RC213VRS.
So far, it hasn't come loose due to vibration, etc.
View detail
![[RaceConcept]RaceConceptHandlebar Kit Flat TypeShort offset](https://global.webike-cdn.net/photo/impression/20/201fafccf5d4975404b505785ab96e64L.jpg)
Fits: Others
To feel more Motorcycle in motion!
After 4 months of replacing the Handlebar with the Babyface Handlebar, I compared it to the OEM Handlebar. The comparison was made by running the OEM Handlebar. Driving on the same route with the Babyface Handlebar. 。 We did this in
The difference between the 6R's OEMHandlebar and the one I felt in the above method is
Turn more than OEMHandlebar when getting off the motorcycle, maneuvering, or turning at right angles through intersections.
I can feel the movement of the front fork's extension and contraction, and the direction of the front tire.
It is
? I think it's because the amount of Handlebar Offset has been reduced. The lower the Offset, the faster the Motorcycle responds to the Rider's actions. On the other hand, the OEM Handlebar seems to delay one TEMPO13 between the input to the Handlebar and the motorcycle's response.
The reason for this is the increased stiffness of the Handlebar. The Babyface Handlebar is more rigid, which means it can withstand more vibrations, shocks, and back and forth volume.:Pair (for Left and Right) It does not absorb the up and down forces. The OEM handlebar does not allow the rider to feel the front fork extension and retraction, which is also a benefit of the increased stiffness. I think this is a benefit of the increased stiffness as well.
To sum up my thoughts on the comparison. The Handlebar makes it easier for the motorcycle to turn when turning and allows you to feel the movement of the motorcycle more. It is
It is important to note that when installing the Handlebar on an OEM motorcycle that does not have a lot of clearance between the Handlebar and the body of the motorcycle, it is important to choose the angle carefully. Especially on a motorcycle like the 6R that has a large amount of offset, the same angle will definitely hit the chassis.
View detail
Cut-out Luxury
It is made of Stainless Steel Type and has a cut-out checker ring finish for a premium feel.
The Short is about 60g lighter than the OEM, so motorcycles with lots of vibration may be affected.
Even better if you can choose the color of the Stainless.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR250, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA NC700S, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR250R, HONDA CBR250RR
I wanted this Lever Guard.
The height of the brake lever and the clutch lever are different, so I wanted to have an adjustable brake lever that doesn't look like there are steps at a glance.
important item
[Was there anything that disappointed you? The Bar End option is only available to the same Manufacturer.
Do you have any wishes or improvements you would like to make for the Manufacturer? Development of Bar End that can be used for OEM Bar End
[Do you have any products to compare it to? No
Frequently Asked Items
What made you decide to buy? Angle adjustment mechanism
How was your experience with it? Satisfied
Was the installation difficult? No
【Please tell me the installation point and hang】 You need to have the guts to remove the screw lock on the OEMBar End
[Was the Instruction Manual easy to understand? Yes
[Included Parts:were they on? Yes
View detail
Good design!
I bought it because I liked the design. By the way, I introduced this one while replacing the Handlebar of MT-09SP. The price is too high. I think it could be a little cheaper, but ….
DesignI like the functionality of this product. I recommend it if you don't mind the price.
View detail
This is good!
If you're a KATANA rider, you've probably been wondering about the Separate Handle Kit I'm sorry
I'll leave a Review for my latecomer brothers.
In addition, I haven't been able to ride it yet, so there is no feeling of use.
The exchange itself was completed without that much trouble.
The replacement procedure is abbreviated because you only have to turn the visible screw and remove it.
Be careful not to scratch the body of the vehicle.
It took me half a day to do it because I'm not used to it, but if you're used to it, you should be able to do it in about 2 hours. Isn't it?
Tools we needed.
・Hexagonal Wrench (5mm/6mm)
8-10mm glasses wrench
・Torque wrench (I don't need someone who says they'll tighten it up solidly by hand.)
・Phillips Screwdriver
・Slotted screwdriver (for prying out the hexagonal hole cover)
Screw lock agent
・Parts cleaner (For LeftGrip pullout)
・Cutter Knife (More on this later.)
OEM Parts are fully available.
However, be careful with the Grip end.
The end of the end is the one that tightens the Screw to crush and spread the Rubber.
The inner diameter of the Grip of this kit is narrowed from about 5cm inside. I'm not going in.
So I shaved off the outer edge of the fixed rubber with the above mentioned Cutter Knife and used it.
As a rule of thumb, make sure the diameter is the same as the diameter of the washer in contact with the rubber and you will be able to get in.
Also, read the Construction Manual carefully and read the Quantity:Pair (for Left and Right) Make sure you don't confuse the Handlebar with
This is the only thing to note.
Now for the fit, I think it's very good.
It's rigid and chunky.
Of course, OEMs can also use the Mirror, but the Handlebar is lowered, so it is possible to use the Mirror on a lower level. I think it would be better for the Balance if you replace the Mirror at the same time.
Position is of course a little forward leaning, so it's hard for people with back pain.
Furthermore, everyone is curious about the range of motion of the Handlebar;
It's fully lockable with no interference, babyface, awesome!
The end is shaved, but the others can be installed without modification.
As a general comment.
For this price and this look, it's a heck of a lot better.
Parenthesis becomes better when the Handlebar is lowered, after all.
I think this low is moderately low for a pontoon.
I recommend this product for Katana riders who want to add a separate handle.
View detail
Things are definitely of good quality
No problem with the product
We-Big's answer said it would fit, but I needed a Spacer, so I inquired It wasn't a good response by the way
View detail
Good stuff
Initially, I bought it just for Parenthesis to make MotoGPImage (Bitter smile) I was able to understand that this is a large functional part that prevents the malfunction of Brake (Sweat) 。
I'm going to put it on any motorcycle from now on
View detail
Great
When I started riding a motorcycle, I picked Bar End for some reason
It was bland and bland in a way that I hoped it would be if it was attached, and the only color I had to choose from was my preference
I finally have a favorite
I will buy again next time
I have a preference, but the quality is solid Hmmm
View detail
Trust Brand
Buy the Long Type in Aluminum
Since it feels lighter than the OEM, I was concerned about the vibration, but I didn't feel it too much when I was riding it It seems to be the same as OEM I especially like the beby face and have customized others
View detail
On public roads - - -
Babyface's Lever Guard!
I do not need this on public road (Lol)
I think that it matches well with RSV 4 with a focus on Visual!
Bar End has 3 Set of Baby Face so I am attaching STM in Italian this time.
Later, you might guard the expensive bremboLever?
It is a very similar price.
Lever Guard's Bolt class is 64 Material : Changed to Titanium.
View detail
Material is Stainless Steel Koko is a toko
Yeah, when I got it in my hands ....
If it is heavy it will be vibration reduction of Handlebar,. I wonder if I get a little tired when I get on a long distance ...?
So, if the item arrives I can do such a thing. It was a solid which I thought was pretty cool.
Unlike Aluminum, Material Stainless Steel which ordinary people can hand out also looks attention from now on?
View detail
The best
Part of the BabyfaceGold to Gun meta of S1000RR! It is one of the best items full of luxurious feeling by color difference.
The installation was T55 I wonder if Torque is necessary so it can be changed as soon as it is aligned.
Since it is Short Type, vibration can not be reduced so much, but I am satisfied that it is known from the beginning.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA NC750, HONDA NC700X, HONDA NC700S, HONDA GB350S, HONDA CBR1000RR-R SP, HONDA CBR1000RR-R, HONDA CBR1000RR, HONDA CBR929RR, HONDA CBR954RR, HONDA CB650R, HONDA CB650F, HONDA CBR650R, HONDA CBR650F, HONDA CBR600RR, HONDA CBR500R, HONDA CBR400R, HONDA CBR250RR
Pretty cool and finished.
It was attached to YZF - R25, but removing OEMWeight was really messy Large.
Motorcycle will collapse unless there are at least two people because it uses a lot of power.
I gave a Gold color to Blue's Motorcycle, but I was able to do Dress-up which is not so annoying.
I am very satisfied..
Brand letters are also very nice.
I have not installed date and Speed, so I do not know the feeling of use
View detail