Reviews
Maybe I don't need Front.
I put it on a 2022 XSR900.
Some say it is better not to put it on because it may slip and aggravate the situation, but I assume it will fall over at low speeds.
I thought that the Protector has little protrusion, and since it has a Radiator, I think it is not so meaningful even if it is attached, since it is originally wide.
I hope you don't experience any effects.
Deep socket 10mm is Quantity:2pc. Set is required, so please be prepared.
View detail
stick out firmly.
I put it on a 2022 XSR900.
Some say it is better not to put it on because it may slip and aggravate the situation, but I assume it will fall over at low speeds.
The back seems to stick out and make sense. I hope you don't experience the effect.
Deep socket 10mm is Quantity:2pc. Set is required, so please be prepared.
View detail
For Dress-up
I removed the Tandem Footpeg to make a Single Seat, so I installed this one. I have read some other reviews that the holes are gapped, but this was not the case with mine. View detail
Slider
I installed it myself and it was very easy. I can ride my motorcycle with peace of mind. View detail
sc40 Bar End Replacement
I had been thinking of a thin Bar End because a large Bar End would make it difficult to get in and out of the Apartment's bicycle parking lot, but I was unsure because I couldn't kill the vibration.
Stainless Steel Bar End Short in BABYFACE
It is not so large, and being Stainless Steel, it is heavy and strong, and vibration was reduced.
It feels easier when the slight vibration coming to the hand is reduced.
View detail
Various position adjustments are possible.
Installed on a YZF-R6. Racefootpeg is listed as not compatible with ABS, but I was able to install it by bending the brake pipe. （I was able to install it by bending the brake pipe.)
Brake switch must be hydraulic.
Position is currently used at the bottom and front of the first for my body type.
One part of the Cowl needed to be cut because the tip of the Shift Pedal was in contact because of the Under Cowl of Magical racing.
I often use the rear brake, so I was able to adjust the position to one that is easy to operate, and I am satisfied.
View detail
Nice and discreet.
The installation method was easy to understand and quick and easy to install.
If the Bolt on the Engine Mount can be removed. But, it's a story of "if".
If you are a woman, or if you are not strong, or if you don't have the proper tools, have the store put them on for you.
I am very satisfied with this product because it is not a big slider, it is small in shape, and it does not require any processing for cowl.
So far I haven't had any help. (Not falling down) I don't know how effective it is.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000 GT
I think it's a good costumer
I think this product is cheaper and more cost-effective than other companies' products. View detail
I think it is cosmetically good.
I think it is a good product in terms of cosmetics, but I would like to see some improvement in design. View detail
Change in appearance.
It is a self-satisfied part with no functional significance. View detail
BABYFACE:Babyface Racing hook
I have installed this product due to the elimination of the Tandem step. It is not intended for use, but for one point customization. View detail
The color is different from the picture.
I liked the design, but was a little disappointed that the gold was a strong orange gold! View detail
![[RaceConcept]RaceConceptHandlebar Kit Up typeSIDEOffset](https://img.webike-cdn.net/catalogue/images/77031/web_Handle-Up_Type_Side_Offset023_TS.jpg)
Product with good texture
Babyface
RaceConcept. RaceConceptHandlebar Kit Up typeSIDEOffset
UP45-10
Handlebar240mm
Item Number ： R05-HS47100M
car Species:YZF-R25 (8BK)
The texture is very good and beautifully finished. Unfortunately, the brembo radipon could not be installed this time because it interferes with the Cowl.
View detail
Wow that's cool
I installed it because I was lonely around the Front.
Circuit also runs, so Protector in the event of a fall.
I hope it will be ??
View detail
Rear Sets are a necessity
I have always had Rear Sets on every Motorcycle I have ever ridden. I still have Babyface on my H2 and have been using it for 8 years and it is non-trouble.
However, the GizaGiza attached to the footrest is so sharp that it scrapes the bottom of the boots more than necessary and scratches expensive leather pants, so I have replaced the footrest with one from another manufacturer.
This time, SV's are smoothed by File only at the edges. Even so, the foot will not slip.
I had an MT09 made by Over on my SecondMotorcycle ride before the S V, but the GizaGiza was really sharp and I had to shave it down quite a bit with a File. Compared to that, Babyface is only in the way at the end, so I bought it this time thinking that I could just shave that part off.
As for the position, it is easy to ride without any complaints. It is also pulled inward, making it easy to get a good knee grip.
The Handlebar is lowered from the NORMAL position, so the Position is reminiscent of the old Racer replica.
You can be sure to choose Babyface, which is selling well both in Japan and overseas.
View detail
![[IDEAL] Rearset Kit](https://img.webike-cdn.net/catalogue/10918/002-a006sv_TS.jpg)
Spartan aluminum cut-out fixed footpeg
Aluminum Cut-out Fixed Rear Sets. position is a little bit backward compared to Normal. I am dissatisfied that there is no Pedal ReturnSPG on the Rear brake side, but I bought Master Cylinder ReturnSPG for Master Cylinder separately and installed it. I'm also a little dissatisfied with the fact that the shift side can't be reversed shifted without purchasing repair parts, but I guess that's about it. View detail
It's going to look good.
Transparent Tube.
I wanted to extend the hose of the Reserver and decided to make it transparent anyway! I bought it with the idea of making it transparent.
It uses Project mu's Green Fluid, which looks Skeleton-like.
It is also useful for air venting because it allows the user to see air bubbles that have accumulated in the hose during air venting.
View detail
I'm not sure how effective it is, but just in case.
The quality of the slider itself seems to be a little small. Well, I bought this Slider just in case. I don't know how well it works yet, and I don't want to know. I don't even want to know.... View detail
Installed on CBR1000RR SP SC77
CBR1000RR SP It was installed on a 2018 MODEL.
Quick shifter is also working perfectly.
They function well as Rear Sets.
The footpeg is number one for its non-slip nature. It is well machined and does not slip at all. You can step on it with confidence.
Some reviewers are concerned about the rigidity of the product due to the large number of parts, but I don't know, and I don't feel any concern at all.
I really like the Gold color, which is flashy but matches the body of the car.
The position of the footpeg is not too tight as long as it is in the mildest position.
It is likely to meet a wide range of needs, as it can also achieve aggressive positioning.
View detail
The body of the car has been tightened.
I didn't like the look of the OEM large footpeg.
Black.
It is identical to the Black of the vehicle and has been tightened.
I'm satisfied
View detail