Reviews
Combination wrench for professionals
Ask any tool swamp dweller what”combination wrench they”d like to see, and the Stahlwille 14Series comes to mind. The Stahlwille 14Series is the one that comes to mind when you ask the residents of Tool Swamp what they think of”Combination wrench.
In terms of appearance, it is a higher-priced product with a pear finish, as opposed to Snap on and Nepros, which are higher-priced products with a mirror finish.
(As expected, it is cheaper than Snap on and Nepros.)
You will not see this in Home center or other places.
It is not as well-known as Snap on or Nepros, and its pear-shaped surface is not as glamorous.
However, it is a product that shines with its individuality backed up by its functionality, such as the feel of elasticity caused by the difference in materials, the difference in Spanner shape caused by the difference in design concept, and the Offset Glasses, which is rare for Combination wrench.
This is a good thing, because it gives a sense of being a professional.
(In fact, I hear it's accepted by Gen.)
Personally, in considering a replacement from KTC's StandardLine, I came to this product because I dislike the mirror finish.
I actually bought it and used it, and my impression is that it is
The bending feeling is definitely unique and uncomfortable until you get used to it.
Spanner is thicker, so you'll want a separate Thin Open Wrench.
Glasses are slightly different from ordinary combination wrench due to the combination of offset, neck angle, and thickness.
So, to be honest, it took some getting used to & it seemed to be a matter of taste.
I will use it as is for a while and if I like it, good, if not, I will sell it and replace it.
(High-end tools should be able to do this)
View detail
Polishing
I bought it before as a trial and it was so good to use that I bought more.
Compact and easy to use with short branches.
It is useful to carry it with the loading tools so that you can polish the Plug when the need arises.
View detail
Like Caliper's Breather Valve.
I do have a glasses wrench, though.
The CombinationWrench is easy to use for Caliper air bleeding, etc. due to its handling and angle.
In addition, because the size is so small, there are many times when the 8mm bolt is needed in a secluded place, so I think it is more convenient to have a separate 8mm bolt.
View detail
easy to grasp
The width of the handle is rounded so that it does not hurt your hand when you exert yourself.
The pearl texture is my favorite Weight is Large, but I like it better because it doesn't show scratches.
As long as you like the way it looks, I think it is the highest Level Spanner as its reputation suggests.
View detail
It's very useful sometimes.
Quantity in most sizes:Pair (for Left and Right) The difference between the two is 1mm, so it's harder to buy.
If you have it, sometimes situations arise where it is very easy to use.
In fact, it would be best if the combination of 12m and 14mm is used, but since 13mm is often used in foreign cars and mobile phone holders made overseas, I think this size combination is not so useless.
View detail
It increases work efficiency.
The Straight Type Both Sides with Ratchet Glasses are effective in tight places and support tightening and loosening in a short time efficiently even if the bolt is a little hard to turn.Chromium Plating is good quality. View detail
It's very useful to have it.
The Magnet is strong enough to pick up tools and parts that have been dropped in tight spaces. The handle is easy to hold, flexible and easy to use, and it's a great addition to your Garage. View detail
although it was pulled by STAHLWILLE (Stahlwille) Brando and purchased, also making is solid and adapting itself also to a hand exactly is felt -- -- they were goods which have satisfaction very in a user friendly manner.
although it was pulled by STAHLWILLE (Stahlwille) Brando and purchased, also making
is solid and adapting itself also to a hand exactly is felt --
-- they were goods which have satisfaction very in a user friendly manner.
View detail
Socket 50 Series of 12 point 1 / 2 angle Drive uses with 14-17-19.Although Ko-ken is used for all the Sockets that turn a hexagon head by 3 / 8 angle Drive except the Plug wrench and 1 / 2 angle Drive uses the Impact Sockets of Ko-ken also manua
Socket 50 Series of 12 point 1 / 2 angle Drive uses with 14-17-19.Although Ko-ken is used for all the Sockets that turn a hexagon head by 3 / 8 angle Drive except the
Plug wrench and 1 / 2 angle Drive uses the Impact Sockets of Ko-ken also manually in many cases,Exceptionally frequently-used 14-17-19 also has much turn here.Although it also unifies all
Sockets by the same Manufacturer that it is good (is to do so rather common?),What had become a special price by a three-piece Set by chance by the excuse -- which becomes easy to identify by daring to make it other Manufacturers in a Metric/Inch, or an angle Drive Size was got.Although comparing with the
Impact Sockets is violent, it is easy to unite with a bolt head by 12 points, and even if compared with the Hand Socket of the other company of the Class, I think that it is lightweight by closing in.A good feeling can also have the surface finish of the same satin as Wrenches.
View detail
You may be very easy to grasp the dent of the grip portion which is the feature of a Stahlwille. Since a high tool is high-precision, it can apply a Torque without hesitation. I think that a good tool should be used since I get the part tool which
You may be very easy to grasp the dent of the grip portion which is the feature of a Stahlwille.
Since a high tool is high-precision, it can apply a Torque without hesitation.
I think that a good tool should be used since I get the part tool which does not have technology in
amateur maintenance to help.
View detail
[Webike Monitor] A lightweight Stahlwille is introduced into 1/2 Socket. Weight does not become foolish, and lightweight [ of a Stahlwille ] is quietly kind if this Size is prolonged work. 24 mm is an object for the Swing-arm Piv
[Webike Monitor] A lightweight Stahlwille is introduced into
1/2 Socket.
Weight does not become foolish, and lightweight [ of a Stahlwille ] is quietly kind if this Size is prolonged work.
24 mm is an object for the Swing-arm Pivot nuts of a Motorcycle.
By the favor of
skid processing, it can turn quickly also by a hand oily at the time of a temporary stop.
Although an order for two or more Sizes was placed simultaneously, slight rust was attached only these 24 mm.
-- rusting -- since it was a Level which can be dropped immediately, there was no problem.
View detail
[Webike Monitor] Looking for the thing used for the Rear-axle Nut of '11 type ZX-10R with 1/2 Socket, it was made Colet. The depth of the Socket was the target overall height and Exactly of the Nut first. A tall Nut may be unable
[Webike Monitor] Looking for the thing used for the Rear-axle Nut of '11 type ZX-10R with
1/2 Socket, it was made Colet.
The depth of the Socket was the target overall height and Exactly of the Nut first.
A tall Nut may be unable to be held if too short.
I think that a big Size, therefore the feature of a Stahlwille currently made lightweight are useful.
Since there was only this product, having fulfilled the conditions which
one was searching for chose it with no problem.
View detail