Reviews
Easy upgrade
This item is high quality and is very easy to fit. Its a must to get rid of the restrictive stock air filter with a small surface area and this is a easy cost effective solution. Very well made and low maintenance View detail
Superb
incredibly fast delivery,only 4 working days to Lithuania. WOW! after changing the filter, the motorcycle really runs faster. thanks again Webike! View detail
Fits: HONDA GORILLA, HONDA CHALY 50, HONDA DAX, HONDA BENLY50CD50, HONDA MONKEY
Great Product
This was an amazing product! It fit so well on my gorilla and gave me lots of power, alot more than i thought. It all fitted really well and there were no problems during instalation and quality was great it was not very difficult to install. The item was priced well. Shipping was very fast which was really nice View detail
Fits: HONDA GORILLA, HONDA MONKEY BAJA, HONDA MONKEY
Looked amazing
These fitted really easy and had no problems fitting them to the motorbike. i was really happy wth how they fitted and they made the bike look really good. The cooler worked really well on my engine and kept the engine oil coller meaning less wear on the engine which i was very happy with View detail
Fits: Others MIKUNI VM26, Others KEIHIN PE28, Others KEIHIN PE24, Others KEIHIN CR mini, Others KEIHIN PD22, Others KEIHIN PC20, Others KEIHIN PC18, Others KEIHIN PB16
Improved the throttle feel!
I used this to change out my factory honda throttle and it worked really wel and gave me a much better throttle feel and i really enjoyed how fast it made the bike feel! View detail
Great Upgrade
These fitted really easy and had no problems fitting them to the engine. i was really happy wth how they fitted and they made the bike look really good. The red really made the bike look great! View detail
Looks nice
I got this item to secure the hoses from the cooler to the engine and it was easy to install and looks really nice and keps the oil lines looking tidy. Great product View detail
Fits: HONDA MSX GROM, HONDA GROM, HONDA SUPER CUBC125, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA ADV160
Worth the expense for the stronger engine feel
About quality and texture - The hyper ignition coil from SP Takegawa is made from injection molded plastic with a red surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - Just another small part that helps improves engine performance over the original part. The hyper ignition coil is worth the expense for the stronger engine feeling through the entire RPM range. Products to buy together - A key product to purchase when upgrading the ignition system is a spark plug cap to complete the hyper ignition coil installations as this part does not come complete ready for use. Difficulty of installation - The installation of the hyper ignition coil is an simple task that took 0.5 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the hyper ignition coil directly to the frame. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the hyper ignition coil is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the hyper ignition coil, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
![[Repair Parts] Cam Sprocket 28T for Regular head](https://img.webike-cdn.net/catalogue/images/119029/00-00-2427_01_TS.jpg)
Regular headRepair Parts
Although the Mukawa Regular head has been discontinued for quite some time, it is helpful that Repair Parts are still available.
I think I can still extend the life of my Regular head. (Lol)
View detail
Style& sound is perfect!
I bought a CROSS CUB instead of a CT110 HUNTER CUB to install the CABTON Exhaust System!
It looks great, just as we wanted it to.
Sound is also light.
View detail
I am satisfied
I had a GORILLA until I bought the MONKEY125, and I wanted to get closer to the Classical Image, so I bought this product. I am happy with my purchase. View detail
Note:5 stars for Handlebar and Touring in the city
As stated in the title, the feeling of operation, push/pull, and position during city driving and touring are 5 stars. I have heard that other companies' handlebars are much narrower and the position is better, but the feeling of control is not so good, and it is not possible to load the front well, etc. However, there is no problem at all with this product for city riding and touring, I have also tried this product with the STD Handlebar made of aluminum to make it lighter and the Handlebar slightly narrower (which is quite large and reduces the stress on the shoulders and wrists considerably). It is easy to use even for Gymkhana. The angle of the handlebar is shown in the picture below, but when the handlebar is fully locked, the bottom of the RightSwitch is level with the slope of the body.
From here, I will show Minus a little personally.
It is great for city touring and slow turning Gymkhana, though,
In the case of Curve and Circuit, the aperture of the Handlebar praised above will be averse to the above, and front load will be somewhat more difficult.
The inner diameter of the handlebar end is 13mm, which is very narrow, so there is no choice of bar end or bar end mirror. 13.5mm is also no good, so it must be 13mm or smaller to fit. I have successfully installed the bar end mirror with the help of the DAYTONA Hi-Sider Universal Product.
View detail
Fits: HONDA GROM, HONDA MSX GROM, HONDA MONKEY125, HONDA MONKEY125
Excellent Quality
Excellent quality item. All machined to the very highest standards. Used google lens to translate instructions. Also used smallbore & more youtube video as guidance View detail
Fits: HONDA MSX125SF, HONDA MSX125, HONDA MSX GROM, HONDA GROM
On the Grom JC92.
I feel that the Pre-road only adjustment is not enough.
The price seems to have gone up quite a bit compared to a while ago.
With this quality, you can get about 12,000 out of it.
Oil damper moves too fast by far when assembled and moved.
Orrifice is too Large in both COMP and TEN.
There are higher-end models with full-length adjustment, but as shown in the photo, the NORMAL and
This is fine for JC-92 as it does not change.
I was going to build it in inverted and lighten it under Spring, but Pre-road.
I gave up before I started messing with it.:If you get a Set, it can be the other way around, but it's pretty good.
I guess I don't care about this level of low-cost products anymore because I will remove parts.
When I first built it with Spring free length, it sank 1/2 of the car body with only 1G.
Finally, the Pre-road comes to the photo.
Originally, sagging was a bit of a hassle since the strokes were extremely short.
Tomorrow I will also tinker with the ZX-14R.
View detail
Good flashing
Very nice flashing lights. View detail
Fits: YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA CYGNUS X, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
SP Takegawa Speedometer Cable Holder for Yamaha Cygnus 125 X , Superb quality and Beautiful finish
I am very pleased with this product, the material , the fitting and the finish of this product is superb. It fits perfect on my Yamaha Cygnus 125 X Scooter. Also the instruction manual is very good. its in Japanes but the pictures are very good and they show the original Cygnus X Scooter on the pictures. In my opinion the price is ok for this quality. The mounting is very easy and I made a Youtube Video how to mount this part on a Yamaha 125 Cygnus X Part 1 : https://youtu.be/B9YfPXGBHoQ Part 2: https://youtu.be/IP84jHEoetA View detail
Well
I thought the fit was good.
The installation was a bit of a hassle as the color tends to fall off when done by one person, but it was difficult enough to install in about 10 minutes.
I think that the product itself is not Beauty because of the lack of waste treatment when painting and welding.
The function itself seems to be fine, but it seems to be loose.
View detail
Fits: YAMAHA BirdCity125, KAWASAKI W650, KAWASAKI W400, HONDA Dio110, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, KAWASAKI W800, YAMAHA SR400, SUZUKI Gixxer, SUZUKI ADDRESS110, YAMAHA CYGNUS X, YAMAHA SEROW250, HONDA GB350S, SUZUKI swish
I do manage to get into the Seat of BirdCity125 though.
Seat at BirdCity125 is the Level that I manage to get into.
I had to pull it in quite a bit. There is no room on the back side either, and I had to repair it with a shoe pond because it was coming loose from the front side of the seat. I needed another one size larger.
View detail
The piston ring set contains what you need to freshen up this area
About quality and texture - The piston ring set from SP Takegawa is made from steel with a heat treated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - SP Takegawa make it too easy to maintain their engine kits. The piston ring set contains what you need to freshen up this area of the engine without having to repurchase the whole engine kit previously installed. Products to buy together - A key product to purchase when freshening up the top end of the engine is a new gasket set as it is far from advised to reassemble this area with used gaskets. Difficulty of installation - The installation of the piston ring set is an advanced task that took 2 hours to complete. Mechanical aptitude and the use of assorted hand tools is what is required to disassemble this part of the engine, correctly fit to the piston and then button the engine back up. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the piston ring set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the piston ring set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA Giorno, HONDA Today, HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA Dunk, HONDA Dio110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA LEAD125, HONDA ADV150, HONDA ADV160
Fits well with 2018 Crosscub.
I purchased this because the thread of the original drain bolt was blunt.
Although it is not visible, it looks cleaner and more durable than a genuine drain bolt.
The O-ring has now traveled 20,000 km and is still in good condition.
Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. -------------------------------------------------- -------- I purchased this because the thread of the original drain bolt was blunt. Although it is not visible, it looks cleaner and more durable than a genuine drain bolt. The O-ring has now traveled 20,000 km and is still in good condition. Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. Powered by Google Translator
View detail