Reviews
Priced right and no damage to the adjuster.
Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View detail
Nothing too good, nothing too bad.
This tool is necessary for pre-road adjustment of shock absorber.
Universal tool.
The quality, the feel, the price, everything is normal.
View detail
Takegawa Lock Nut wrench for CT70
Package arrived quickly and safely from Webike! This tool is a must for anyone replacing the clutch on old Honda CT70s with semi automatic transmissions. This will fit 1/2 drive socket wrenches or cordless impact wrenches. Tool is very useful for my as i needed to replace my worn OEM Honda clutch with a Takegawa Clutch kit also from Webike. Thank you Webike! View detail
Another long Pin would be perfect.
Normally, I would expect to see a Pin that pushes out the Chain Pin and a longer Pin that pulls out the Chain Pin.
This one comes with only one type of Pin.
Therefore, it is necessary to push out two Pins, remove the Plate, pull it out and push the ThailandPin to the end.
That is a bit of a hassle, but for the price, this is what you get.
However, the fact that the tool is Compact is a Large change Good.
View detail
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
I don't want it in jc92Clutch.
I don't use it to replace the Clutch on my jc92.
Clutch lock nut is 19mm.
View detail
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
Not used for jc92Clutch work
Center nut of jc92 Clutch turns in a box of 19 View detail
No problem securing the flywheel
About quality and texture, I can confirm that the quality is great and that the material used is steel with a mixture of finishes, black coating, plating and rubber. About the feeling of use, No problem securing the flywheel on the Grom for removal of the nut which I have used several times now and I see there being no issues using it on other sized circular parts on the bike that need restraining. Products to buy together, Another tool to help prevent the crankshaft from spinning is the the gear holder from Kitaco that would be ideal to also add to your cart to use in conjunction with the pulley holder. Difficulty of installation, I can say the fitment of the pulley holder for my installation was very easy due to the ease of access and simple nature of the tools operation. Cost performance and comparison with other products, The pricing of the product is good. You receive a product from a quality material and a matching finish. There are cheaper and more expensive options from other brands available but the Takegawa one does it with zero issues. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Used to remove O2 Sensor from CT125CT110 HUNTER CUB
Used this one that fits Size for cleaning Sensor.
The ZETA Under Frame Kit is installed, but as it is, it interferes, so it needs to be shifted a little. (Just remove the footpeg side and you're good to go.)
Like the 110CUB, if there is a Connector on the Sensor head, a Deep socket or similar can be substituted, but without one on the CT125, there is no way to remove it, so I think it would be good to have.
View detail
I don't need it.
I could do without it.
I don't care if there is.
I can make adjustments without worrying about injury.
View detail
Pin is short and unusable.
The pin is short and the holder is at an angle, making it difficult to apply force and work.
When incorporating Mr. Takekawa's parts, the Manufacturer listed them as tools, but…
View detail
Pulley Holder
About quality and texture - Excellent quality, the holder has a solid feel and looks like it will last my lifetime. About the feeling of use - Works really well, did a great job stopping the motorcycle part from rotating and has plently of protection from the red rubber covering. Products to buy together - If you are looking to purchase a pulley holder for your Monkey 125 you are more then likely going to be also buying a flywheel pulley too, I went with the one from Kitaco product # 674-0500130. Difficulty of installation - Easy to use with the T bar handle, it gets the tool nice and tight on the motorcycle part. Cost performance and comparison with other products - Priced well when on special, there are multiple brands that sell this tool on Webike but nothing cheaper then the one from Takegawa. About shipping and packaging - Was part of a larger order delivered by sea freight. Was cheap, arrived on time and everything was packaged safely. Any concerns, cautions, or advice when purchasing - The pulley holder is adjustable from a diameter of 60 to 120 so just make sure it suits the part you are intending to use it on. View detail
Adjustable sized pulley holder
Almost all the maintenance tools I have to work on my motorcycles are from Kitaco but I went with the one from Special Parts Takegawa for the pulley holder purely because it was cheaper, that might have been a mistake as the red rubber covering has cracked and is damaged already. The pulley holder works well but has now lost some protection from possibly damaging the motorcycle parts. When in use the pulley holder works well and suits many different sized parts, I have used it to remove my oil spinner and flywheel. The clutch will be have some maintenance next so I will be trying out on that too. So in summary a good priced pulley holder but the quality of the rubber covering could be better and would be nice if a replacement covering was available to purchase. View detail
It's just one of those things.
It's not impossible to use, but it was easy to come off because the hook was too weak.
I think it would have been easier to use if there were no bumps in the patches.
View detail
I'm not on much.
I use it to remove the Flywheel on my LEAD 100.
There is a similar product, Band, Belt, or Type, but I would like to use the Pin type which is highly universal.
I chose the
The pin diameter of this product is 5mm and 9mm, and 5mm is just right for fixing the Flywheel of LEAD.
Also, the 9mm one is used to fix the drive train.
I really appreciate the universality of it.
I don't have a lot of time to use it in my daily maintenance, but the Gold price is reasonable, too.
It is very useful to have.
I mean, I can't do LEAD maintenance without it ….
View detail
Necessary for Chain's Piece stuffing.
This tool is required to pack a piece of Non-Seal Chain.
When you change the number of chain pieces in Sprocket, you will need to change the number of chain pieces as well.
View detail
Takegawa Pulley Holder
I am happy with this tool from Special Parts Takegawa. Instead of taking the motorcycle to the repair shop I decided to buy the special tools required and do the job myself which has saved me money so I can buy more motorcycle parts from Webike. The pulley holder did the job as advertised and held the flywheel while loosening the nut and the torqueing the nut. The pulley holder comes nicely packaged and delivered from Webike. Using the pulley holder is very easy and for me this tool will have multiple uses over the time I will be maintaining my motorcycle. Looking forward to my next purchase from Webike View detail
Takegawa Pulley Holder
The maintenance tools I have for my 2018 Honda Monkey 125cc are a mixture of Kitaco and Special Parts Takegawa. I purchased the pulley holder from Special Parts Takegawa as Webike had a good special on at the time. When the tool arrived I inspected it and found everything to be satisfactory. I have since used the pulley holder once to remove the rotor under the left hand engine case to gain access to upgrade some engine internals. On completion of this job I found the pulley holder to do its job successfully but the red rubber coating on the strap has already been damaged and is now exposing the metal under the rubber strap. I will make a repair before it is used again and hopefully not damage any of the engine parts when used. View detail
It is inexpensive, accurate, and safe to work with.
I bought this one after buying other expensive ones to no avail. I am satisfied with it. View detail
Maintenance essentials!
Scooter drivetrain maintenance essentials
We can't start without it.
KN Planning:KN Kikak
Universal Holder SUZUKI Series
https://www.webike.net/sd/22644793/
I bought it to use at the same time
Easy to use and durable!
View detail
watchman
There are two types of Recoil packets, 1D and 1.5D, but basically, if you buy 1D, it's not a problem There is none. Because even in JIS. The Bolt's cost is only 1D, as long as the female threads are iron-based. Recoil packet is Stainless, so the 1D It's enough for the cost of the charge. However, you should use 1.5D only when you use aluminum bolts. To begin with, you should not combine Aluminum and Stainless bolts because they have electric corrosion. But it is! If you don't know what electric corrosion is, Google it. View detail