Reviews
Priced right and no damage to the adjuster.
Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View detail
Used to remove O2 Sensor from CT125CT110 HUNTER CUB
Used this one that fits Size for cleaning Sensor.
The ZETA Under Frame Kit is installed, but as it is, it interferes, so it needs to be shifted a little. (Just remove the footpeg side and you're good to go.)
Like the 110CUB, if there is a Connector on the Sensor head, a Deep socket or similar can be substituted, but without one on the CT125, there is no way to remove it, so I think it would be good to have.
View detail
I don't need it.
I could do without it.
I don't care if there is.
I can make adjustments without worrying about injury.
View detail
Adjustable sized pulley holder
Almost all the maintenance tools I have to work on my motorcycles are from Kitaco but I went with the one from Special Parts Takegawa for the pulley holder purely because it was cheaper, that might have been a mistake as the red rubber covering has cracked and is damaged already. The pulley holder works well but has now lost some protection from possibly damaging the motorcycle parts. When in use the pulley holder works well and suits many different sized parts, I have used it to remove my oil spinner and flywheel. The clutch will be have some maintenance next so I will be trying out on that too. So in summary a good priced pulley holder but the quality of the rubber covering could be better and would be nice if a replacement covering was available to purchase. View detail
Necessary for Chain's Piece stuffing.
This tool is required to pack a piece of Non-Seal Chain.
When you change the number of chain pieces in Sprocket, you will need to change the number of chain pieces as well.
View detail
Takegawa Pulley Holder
The maintenance tools I have for my 2018 Honda Monkey 125cc are a mixture of Kitaco and Special Parts Takegawa. I purchased the pulley holder from Special Parts Takegawa as Webike had a good special on at the time. When the tool arrived I inspected it and found everything to be satisfactory. I have since used the pulley holder once to remove the rotor under the left hand engine case to gain access to upgrade some engine internals. On completion of this job I found the pulley holder to do its job successfully but the red rubber coating on the strap has already been damaged and is now exposing the metal under the rubber strap. I will make a repair before it is used again and hopefully not damage any of the engine parts when used. View detail
Maintenance essentials!
Scooter drivetrain maintenance essentials
We can't start without it.
KN Planning:KN Kikak
Universal Holder SUZUKI Series
https://www.webike.net/sd/22644793/
I bought it to use at the same time
Easy to use and durable!
View detail
I used it to remove Flywheel.
I used it to exchange Flywheel of LETS 4.
Because it is universal, it seems that it can be used for other car models, but the frequency of use is not so high, so it is a product that can not be said so, it is appreciated if you can suppress Cost a little more.
View detail
Special tool
I was riding the car at the time of shipment for about half a year, but I wanted to adjust slightly and purchased it. It is hard to adjust the position slightly, but there is no problem.
I think that there are not many occasions to use, but these tools themselves have never been better than nothing.
View detail
It was saved. ♪
Spindle of GEARShift spindleArm broke and purchased to disassemble Gear case.
Because it could not be disassembled without this tool, it was very useful ♪
View detail
At Restore
Purchase for removal of Flywheel and Coil from Engine that rainwater entered.
This is recommended to fix Engine
I managed to let my friends support me. I managed to get rid of it somehow ... It was very hard with RustRust ...
Since my NS - 1 is First Model Type, ignition timing will be touched, so I will use it for a while so I think that this price is Reasonable.
View detail
Fits: Others , HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MSX125, HONDA MSX125SF, HONDA GROM, HONDA DAX125, HONDA CT125
To remove Flywheel does not start without this
It is a special tool with few turns but it is absolutely necessary to remove Flywheel!
With this you can easily remove it ♪
Even if you do not have a nickname, you may be able to remove it, but if you break the gap well, it will cost you a higher price
View detail
Let's have, if it fixes by itself. [ indispensable ] [ Items ? ] A problem in particular is not in operativity.
Let's have, if it fixes by itself. [ indispensable ] [ Items ?
]
A problem in particular is not in
operativity.
View detail
It purchased for WR exchange of cygnus X-SR. It is a tool indispensable to maintenance of a scooter. User-friendliness is good. The fasten lump for fixing a pulley does not need power so much, either. The working metal stick which has and
It purchased for WR exchange of cygnus X-SR.
It is a tool indispensable to maintenance of a scooter.
User-friendliness is good.
The fasten lump for fixing a pulley does not need power so much, either.
The working metal stick which has and is in a hand prevents idling of a pulley by assistance of the power of a lump [ fasten ], and making it interfere in the case of a car body.
Although one side falls out and this metal stick has the press of prevention, another side is unprocessed and can also be drawn out.
When storing small, it is helpful, but it may be easy to lose.
View detail
Since it can be used not only fixation of a pulley but when removing the clutch RIFUFUTA bolt of four minis as a flywheel holder, it is convenient and finds it useful. Since it can decompose, a tool box does not become obstructive, either.
Since it can be used not only fixation of a pulley but when removing the clutch RIFUFUTA bolt of four minis as a flywheel holder, it is convenient and finds it useful.
Since it can decompose, a tool box does not become obstructive, either.
View detail
It is one of the tools required for point maintenance. A flywheel is removed using this. If there is this, a flywheel can be removed in several minutes of MONO. If you fix by yourself, it will be * one pleasing.
It is one of the tools required for point maintenance.
A flywheel is removed using this.
If there is this, a flywheel can be removed in several minutes of MONO.
If you fix by yourself, it will be * one pleasing.
View detail