Reviews
The pack of 6 replacement socket set screws sure come in handy
About quality and texture - The socket set screw from SP Takegawa is made from stainless steel and is sized at M3 x 4mm while the quality from the overall fit and finish is perfect. About the feeling of use - The socket set screw is used on the drain bolt with magnet and does a wonderful job of securing the stick temperature sensor but being so tiny are easily lost so the pack of 6 replacement socket set screws sure come in handy. Products to buy together - The socket set screw are a key part to work together with the drain bolt with magnet as is the sealing washer which are a product worth buy also. Difficulty of installation - The installation of the socket set screw is a simple task that took 0.1 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the socket set screw into drain bolt with magnet. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the socket set screw is no different. Having the pack contain a quantity of 6 socket set screws helps achieves this. About shipping and packaging - With there being no cost difference between sea freight and EMS for the socket set screw, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
Does a wonderful job securing the largest sized breather hose
About quality and texture - The 15.5mm hose clamp from SP Takegawa is made from spring steel to maintain it's shape and finshed with a trivalent chromate treatment for prolonged corrosion protection, the quality from the overall fit and finish is perfect. About the feeling of use - The 15.5mm hose clamp does a wonderful job securing the largest sized breather hose to the barbed hose fitting and breather cap within the catch can system and is a much neater option then using a zip tie, with the end result being a professional looking installation. Products to buy together - A key product to buy together with the 15.5mm hose clamp is the 12mm breather hose for connecting the catch can to the engine via the breather cap for ventilation and drainage purposes. Difficulty of installation - The installation of the 15.5mm hose clamp is a simple task that took 0.1 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to position the hose clamp to secure the breather hose to the barbed hose fitting. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the 15.5 mm hose clamp is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the 15.5mm hose clamp, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
A much neater option then using a zip tie
About quality and texture - The 13mm hose clamp from SP Takegawa is made from spring steel to maintain it's shape and finshed with a trivalent chromate treatment for prolonged corrosion protection, the quality from the overall fit and finish is perfect. About the feeling of use - The 13mm hose clamp does a wonderful job securing the breather hose to the barbed hose fitting within the catch can system and is a much neater option then using a zip tie, with the end result being a professional looking installation. Products to buy together - A key product to buy together with the 13mm hose clamp is the hose connector that allows for a change in breather hose size from 12mm to 5mm as generally for the motorcycles I work on do not have the small barbed hose fitting on the motorcycle side. Difficulty of installation - The installation of the 13mm hose clamp is a simple task that took 0.1 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to position the hose clamp to secure the breather hose to the barbed hose fitting. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the 13mm hose clamp is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the 13mm hose clamp, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
Does a wonderful job securing the breather hose to the barbed hose fitting
About quality and texture - The 9.5mm hose clamp from SP Takegawa is made from spring steel to maintain it's shape and finshed with a trivalent chromate treatment for prolonged corrosion protection, the quality from the overall fit and finish is perfect. About the feeling of use - The 9.5mm hose clamp does a wonderful job securing the breather hose to the barbed hose fitting within the catch can system and is a much neater option then using a zip tie, with the end result being a professional looking installation. Products to buy together - A key product to buy together with the 9.5mm hose clamp is the hose connector that allows for an increase breather hose size from 5mm to 12mm as generally for the motorcycles I work on do not have the small barbed hose fitting on the motorcycle side. Difficulty of installation - The installation of the 9.5mm hose clamp is a simple task that took 0.1 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to position the hose clamp to secure the breather hose to the barbed hose fitting. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the 9.5 mm hose clamp is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the 9.5mm hose clamp, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
181cc Gasket Kit
Quality looks as good as always from SP Takegawa, a good replacement to the old 181cc 2v gaskets that are needed to be replaced View detail
Takegawa Lock Nut wrench for CT70
Package arrived quickly and safely from Webike! This tool is a must for anyone replacing the clutch on old Honda CT70s with semi automatic transmissions. This will fit 1/2 drive socket wrenches or cordless impact wrenches. Tool is very useful for my as i needed to replace my worn OEM Honda clutch with a Takegawa Clutch kit also from Webike. Thank you Webike! View detail
Replacement O-ring for the 4-Valve Head Cam Cover on the Grom
About quality and texture: I am happy with the quality of the cylinder head side cover O-ring from SP Takegawa. Made from a soft flexible rubber to help create a good seal, this is a single O-Ring for the cam cover. About the feeling of use: The O-ring is shaped perfectly and fits easily into the cam cover and once torqued down have zero oil leaks. Products to buy together: A tappet adjustment wrench would also be desirable to purchase along side the cylinder head side cover O-ring as this cover is removed regularly to confirm TDC for valve clearance checks and adjustments on the 4-valve head. Difficulty of installation: The process to install takes about 5 minutes, undo the allen key fasteners for the cam cover and use an O-ring pick tool to remove the old O-rings so to not damage the cover. Lubricate the new O-ring with engine oil, fit to the cover and torque down the allen key fasteners to 8 Nm. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality O-ring that is specifically designed and shaped for the SP Takegawa 4-valve head that is not available for any other source. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you wish to refresh all the inspection cover O-Rings on your SP Takegawa 4-valve head then you can purchase the set of 3 O-Rings instead of purchasing them all individually. View detail
สินค้าตรงรุ่น สั่งแล้วไม่ผิดหวัง View detail
No problem securing the flywheel
About quality and texture, I can confirm that the quality is great and that the material used is steel with a mixture of finishes, black coating, plating and rubber. About the feeling of use, No problem securing the flywheel on the Grom for removal of the nut which I have used several times now and I see there being no issues using it on other sized circular parts on the bike that need restraining. Products to buy together, Another tool to help prevent the crankshaft from spinning is the the gear holder from Kitaco that would be ideal to also add to your cart to use in conjunction with the pulley holder. Difficulty of installation, I can say the fitment of the pulley holder for my installation was very easy due to the ease of access and simple nature of the tools operation. Cost performance and comparison with other products, The pricing of the product is good. You receive a product from a quality material and a matching finish. There are cheaper and more expensive options from other brands available but the Takegawa one does it with zero issues. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY125, HONDA MSX125, HONDA MSX125SF, HONDA GROM
Preformed so easily fits the 4 valve tappet cover
About quality and texture, I can confirm that the quality is great and that the material used is NBR (nitrile butadiene rubber) which is a synthetic rubber resistant to fuel and oil. About the feeling of use, This o-ring is preformed so easily fits the 4 valve inspection cover which is handly as it could be difficult to fit due to the covers unusual shape. Products to buy together, To lessen the likelihood of damaging the covers sealing surface if using incorrect tooling if would be ideal to add a set of o-ring picks to your cart. Difficulty of installation, I can say the fitment of this inspection cover o-ring was very easy due to the simple nature of the install and easy access to the cover and its four bolts. Having the o-ring shaped specially for this cover is a massive help too. Cost performance and comparison with other products, The pricing of the product is great. You receive a o-ring made from a quality material that is durable for it's environment and similar to other special o-rings like this. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY125, HONDA MSX125, HONDA MSX125SF, HONDA GROM
Replacement O-ring for the 4-Valve Head Tappet Cover on the Grom
About quality and texture: I am happy with the quality of the inspection cover O-ring from SP Takegawa. Made from a soft flexible rubber to help create a good seal, this is a single O-Ring for the tappet cover. About the feeling of use: The O-ring is shaped perfectly and fits easily into the tappet cover and once torqued down have zero oil leaks. Products to buy together: A tappet adjustment wrench would also be desirable to purchase along side the inspection cover O-ring as these covers are removed regularly for valve clearance checks and adjustments on the 4-valve head. Difficulty of installation: The process to install takes about 5 minutes, undo the allen key fasteners for the tappet cover and use an O-ring pick tool to remove the old O-rings so to not damage the cover. Lubricate the new O-ring with engine oil, fit to the cover and torque down the allen key fasteners to 6 Nm. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality O-ring that is specifically designed and shaped for the SP Takegawa 4-valve head that is not available for any other source. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you wish to refresh all the inspection cover O-Rings on your SP Takegawa 4-valve head then you can purchase the set of 3 O-Rings instead of purchasing them all individually. View detail
I chose it because it is a Black color.
Used for Crab caliper fixed Bolt.
BlackBolt looks tighter on BlackBody.
View detail
Hose Clamps that Continue to Hold their Clamping Strength for the SP Takegawa Kits
About quality and texture: I am happy with the quality of the hose clamps from SP Takegawa. Made from a steel construction with an external diameter of 15 mm and an internal diameter of 13 mm. About the feeling of use: These hose clamps from SP Takegawa are very strong and continue to hold their clamping strength after being removed and installed many times. Products to buy together: Some 8mm clear breather hose from SP Takegawa would also be desirable to purchase alongside the hose clamps for you to be able to connect up to your catch tank. Difficulty of installation: The process to install takes just a few minutes for each hose clamp, I find the strength of the hose clamps too high to be able to fit by hand so use pliers to complete this. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a high quality material hose clamp at a fair price as compared to the lower quality material some brands use for their hose clamps that lose their strength over time. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: SP Takegawa offer their hose clamps in four different sizes but if different sizes are required then NTB hose clamps maybe what you need. View detail
Yeah, PetitCustom ♪
Isn't it pretty nice? View detail
Cylinder Head and Base Gasket Set for your SP Takegawa Big Bore Equipped Grom
About quality and texture: I am happy with the quality of gasket set from SP Takegawa, the base gasket is a paper material while the head gasket is metal. About the feeling of use: When it comes time to reassembling the engine after some major works a new set of gaskets is neccessary for the cylinder to ensure the performance is not effected by any leaks and these have done the job with with no issues. Products to buy together: Since the piston was removed for the major works then some piston pin c-clips would also be desirable to purchase along side this gasket set. Difficulty of installation: The process to install takes about an hour, you want to put the engine at TDC followed by removing the head and cylinder which will allow you to replace both gaskets. Clean the mating surfaces before installing the gaskets, reassemble and torque the head bolts in a criss cross pattern. A little difficult to do. Cost performance and comparison with other products: A High costing for gaskets but not ones that are changed regularly so the price can be considered reasonable and very similar to what you would pay for the same gaskets from Honda for the OEM bore size. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: This gasket seat is specific for the 181cc cylinder, a different gasket set is available for the 143cc cylinder. View detail
Handy Ring Terminal Lead to Ground Universal Accessories to the Grom
About quality and texture: I am happy with the quality of ring terminal lead from SP Takegawa made from a ring terminal, male bullet connector and small section of wire About the feeling of use: Makes connecting a ground to universal accessories like my temperature guage that is not Grom specific a breeze and there is no premanently cut wires if the accessory is removed in the future. Products to buy together: An electro tap would also be desirable to purchase along side the ring terminal lead so that a power can be provided to the accessory via the motorcycles wiring harness. Difficulty of installation: The process to install takes about 5 minutes, the accessory will need a female bullet connector fitted and simply connect the bullet connectors and bolt the ring terminal down onto a section of the Grom's frame that is free from paint for a good connection. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting two leads complete with connectors to save you the time preparing these yourself as compared to purchasing all the items individually which will be cheaper if you need numerous leads. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: This is a relatively short lead and if you are needing different lengths search grounding cable for many more options. View detail
Fits: Others , その他
Can be used without problems
There were comments that the Light was dark and difficult to see, but it worked fine for outdoor work during the daytime. View detail
13mm Hose Clamp from SP Takegawa
* About quality and texture, A steel spring clamp with a goldish in colour corrosion resistant coating, not silver in colour like the Webike picture. * About the feeling of use, These hose clamps secure the hose very firmly onto the mating receptical and I do like the clean finish as opposed to the screw type hose clamps that can look untidy once secured. * Products to buy together, Some new breather hose was purchased along side these additional hose clamps, I have moved away from the clear breather hose to the black. * Difficulty of installation, The fitting of these hose clamps is simple when using a suitable set of plyers, I used a set of mini multi grips with tape over the ends to prevent scratching up the coating as much as possible..The process was completed in 2 minutes with no difficultly. * Cost performance and comparison with other products, At just over $1 AUD each I find the pricing reasonable but the ones available from NTB can be had for half this price and I will gives those a try if I need more in the future. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, I can see that maybe using these goldish coloured hose clamps may not be very aesthetically pleasing when paired with the new black breather hose so if that is the case for yourself, Daytona offer these hose clamps in black. Use the product reviews to assist in making a decision on your purchase. View detail
O-Ring 12mm
About quality and texture - Excellent quality, no issue with the O-ring. About the feeling of use - Great fit and functioning as intended. Products to buy together - Purchased together with ball bearing, product # 00-01-1011. Difficulty of installation - Easier then easy, just added a little engine oil to the O-ring and it slips straight on. Cost performance and comparison with other products - Expensive for sure a little O-ring, I am sure Webike would have an alternative from another brand but I am yet to reasearch this. About shipping and packaging - Cheap shipping cost, on time delivery and safety packaged. Any concerns, cautions, or advice when purchasing - If you decide to search for a cheaper alternative you are looking for a 12mm O-ring. View detail
Repair O-Ring for Oil Filter Cover
About quality and texture - Excellent quality, no issue with the O-ring. About the feeling of use - Zero oil leaks from the oil filter cover, so it is doing its job. Products to buy together - Add one of these repair O-rings to the cart when ordering a few oil filters. Difficulty of installation - Easier then easy, just added a little engine oil to the O-ring and it pops straight on. Cost performance and comparison with other products - Reasonably prices from SP Takegawa, I am sure Webike would have an alternative from another brand but I am yet to reasearch this. About shipping and packaging - Combined shipping cost was great and shipping time was spot on. All items arrived safety due to the great packaging, even when the box was slightly damged during its journey. Any concerns, cautions, or advice when purchasing - If you decide to search for a cheaper alternative you are looking for a 40mm O-ring. View detail