Reviews
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY BAJA
Looked very good
These fitted really easy and had no problems fitting them to the engine. i was really happy wth how they fitted and they made the bike look really good. View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S
Red Spring gives a sporty look
SP Mukawa and KITACO are considered as 2Large candidates to replace the OEMShock that has been disconnected.
Since I commute 100% of the time, I chose it based on word of mouth and cosmetics regarding ride comfort rather than athletic performance.
The change in ride quality was the Point this time, so we are concerned about the fact that the overall length is the same.
Pre-road adjustment is possible and a Hook wrench is included.
However, if you want to make fine adjustments, you need to shift the air cleaner box every time, so for now, we adjusted the pre-road to be the same as the original Shock and Spring.
I haven't made any adjustments from there, but the ride is comfortable, partly because it is a replacement for the old Shock.
The desired ride has improved.
I am using a single rider, Helmet in is rain gear, no RearCase, and it is just fine for me so far.
On the other hand, when stepping on the gap at a moderate speed, even an amateur can feel the supple movement of the Shock as if the damper is also working.
Since it is difficult to grasp the performance just by installing it, a test ride and setting may be essentially necessary.
View detail
Fits: HONDA MSX125SF, HONDA MSX125, HONDA MSX GROM, HONDA GROM, HONDA GROM
On the Grom JC92.
I feel that the Pre-road only adjustment is not enough.
The price seems to have gone up quite a bit compared to a while ago.
With this quality, you can get about 12,000 out of it.
Oil damper moves too fast by far when assembled and moved.
Orrifice is too Large in both COMP and TEN.
There are higher-end models with full-length adjustment, but as shown in the photo, the NORMAL and
This is fine for JC-92 as it does not change.
I was going to build it in inverted and lighten it under Spring, but Pre-road.
I gave up before I started messing with it.:If you get a Set, it can be the other way around, but it's pretty good.
I guess I don't care about this level of low-cost products anymore because I will remove parts.
When I first built it with Spring free length, it sank 1/2 of the car body with only 1G.
Finally, the Pre-road comes to the photo.
Originally, sagging was a bit of a hassle since the strokes were extremely short.
Tomorrow I will also tinker with the ZX-14R.
View detail
Fits: HONDA MSX125SF, HONDA GROM, HONDA GROM, HONDA MSX GROM, HONDA MSX125
To improve ride comfort
[How is it used?
Maximum one-way distance is about 200 km for city driving and touring.
Was the one you received as per Image?
Spring's paint and construction was solid.
Was the installation difficult?
The Exhaust System was removed and a hard plastic box was placed under the Engine to float the Swing Arm and suspend the Grab Bar by the Chain Block.
If you can lift the car body, it may not be a problem, but basically, it may be better to ask Shop to do it for you.
How was your experience with it?
The ride quality is very good. I don't know about the Others yet as I am still breaking it in.
[Included Parts:were they on?
Pre-road and ride-height adjustment tools were included.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
The OEM shock of point and hang JC92 is 240mm, so we shortened it to 245mm, which is 5mm higher than the original height.
View detail
Fits: HONDA CT125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50 PRO, HONDA CT125
Shock absorber with limited CROSS CUB50cc compatibility
I was looking for Shock absorber due to OEM fluff, but only Mukawa and Endurance had it as 50cc compatible by Manufacturer.
The damping force can be adjusted to 5 levels, and although I ran the car in the softest state, it felt much stiffer and more firmly planted than the OEM.
Red Nut in the picture is SP Mukawa Rear shock mountNut8 hole Red 06-06-0020
View detail
Fits: HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CT125, HONDA CROSSCUB110, HONDA CT125
improve one's footing
Footing is slightly better.
This makes the Side Stand longer, or the Motorcycle less inclined and unstable, and the Center Stand harder to apply.
Ride quality is better than OEM.
Now we'll see how durable it is
View detail
The attached Bolt is subtle.
The accuracy and texture are perfect, but the Bolt that comes with it is subtle.
The hexagonal wrench is shallow and has only an M6 hexagonal part for the M8 bolt, so it was instantly licked.
I was able to get away with it because I had the tools to remove the licked Bolt, but I had to buy a replacement at Home center, which was expensive!
View detail
The security of having your feet on the ground
My wife, who is just under 160cm tall, started riding a CT110 HUNTER CUB, but she is a complete ballerina and has had some bumps and bruises. She was worried about it, so I replaced it with TWRLow seat.
The low seat did not have much effect, but this 40mm Down Suspension worked perfectly, and he was pleased that although his heels floated, the feeling of security was completely different.
As far as my test run is concerned, I think the convergence after the Gap has improved compared to NORMAL. It seemed to converge smoothly and without any lingering aftermath without bouncing around.
However, be careful not to bank too deep, as the Gap during the Corner ring may cause either the Center Stand or the Knee Slider to make contact.
View detail
Fits: HONDA 6V Gorilla, HONDA 6V Monkey, HONDA monkey, HONDA 12V GORILLA, HONDA 12V MONKEY, HONDA MONKEY BAJA
Nice and simply styled to match the overall original look of the bike
About quality and texture, I can confirm that the quality is great and that the material used is steel with a mixtures of chrome plating for the shock body and gloss red powder coating for the springs. About the feeling of use, I am excited to now have adjustment available via the 5-way preload collar for when adding additional weight and they are nice and simply styled to match the overall original look of the bike. Products to buy together, An inner fork upgrade kit from the likes of Tanaka Trading would also be ideal to add to your cart to make the bike more useable in all riding conditions. Difficulty of installation, I can say the fitment of the rear shock absorbers was very easy due to the simple nature of the task and ease of access to the mounting nuts. Cost performance and comparison with other products, The pricing of this product is great as you are receiving a nicely styled set of shocks with quality surface finishes. Other popular brands do start their line-up with lower pricing but the same features. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY BAJA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
MONKEY Aluminum Wheel
Chinese products require BALI before assembly of tiers, but Takegawa does not.
The finish is very good
View detail
A highly detailed addition
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all silver anodized finish. About the feeling of use, These pillions step covers are a highly detailed addition when you wish to remove the pillion step assemblies from the swingarm. Products to buy together, Other highly detailed parts from Takegawa to help improve the look of other original plain looking parts like the generator plug set would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the pillion steps covers for my installation was very easy due to the ease of access and simple nature of securing the covers to the swingarm inserts with the included fasteners. Cost performance and comparison with other products, The pricing of the product is great, you receive a part made from a high quality material with a matching finish. There is a cheaper option available from Kitaco but these have a much better looking design. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA Ape50, HONDA CD50, HONDA GORILLA, HONDA CL50, HONDA Ape50, HONDA 12VDAX50, HONDA Ape50, HONDA MONKEY (FI), HONDA MONKEY, HONDA XR100Motard, HONDA XR50Motard, HONDA GORILLA, HONDA Ape50(FI), HONDA Ape50(FI), HONDA Ape100
Black, after all!
I wanted to make the footpeg in Aluminum … but Silver is ….
This was the only Black available, though, which was the deciding factor in my purchase,
I installed it and am satisfied with Large!
Made by Takegawa! There is no doubt that it is both premier and custom, and of course, practical!
It is more stable and easier to operate than the OEM rubberfootpeg.
It is one of the bestItems I have ever bought♪
If it were a little cheaper, there would be nothing to say, but after seeing the product's construction, it was a good one at a reasonable price.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MSX GROM, HONDA MSX125SF, HONDA GROM
It's really pretty and luxurious.
I removed the handle, replaced it, and reassembled the handle. Since I couldn't do it myself, I went to a repair shop and asked for it. I tried to be as careful as possible to avoid damaging the bolt when tightening it after replacement, but small scratches were unavoidable. The body was made of aluminum, so the scars are not visible and it looks natural. Very pretty and satisfactory. In reality, it looks very luxurious --------------------------------------------- ------------- After separating the handle, it replaced it and assembled the handle again. I couldn't do it myself, so I went to the repair shop and asked. When I was replaced, I was as careful as possible to prevent the bolts from hurt, but the small wounds were inevitable. The body is chosen as aluminum, so the wound is hard to see and natural. Very pretty and satisfactory. Actually, it is very luxurious Powered by Google Translator View detail
Nice but catastrophic malfunction
I really enjoyed this swingarm for about 600 miles. Came out one day and there was this visible crack in the swing from a distance because you have to admire a moto with the new parts every time you exit the house and also to check the tire pressure, ect. I believe it was a one off from the MFG and did not dispute a claim based on being in the US and having to pay all the shipping fees back. Takegawa is great quality parts, I have many more of their parts on multiple bikes but I do believe there was a mistake on this production and or specific swingarm. Spacing was near perfect, torque was on point, something just went wrong. View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA DAX, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA GORILLA, HONDA GORILLA, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB110
I am excited to now have adjustment available via the adjustable preload nut
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a silver finish for the shock body and steel with a gloss red powder coating for the springs. About the feeling of use, I am excited to now have adjustment available via the adjustable preload nut for when adding additional weight and they are nicely styled to match the original look of the bike. Products to buy together, A fork spring upgrade would also be ideal to add to your cart to make the bike more useable in all riding conditions. Difficulty of installation, I can say the fitment of the rear shock absorbers was very easy due to the simple nature of the task and ease of access to the mounting nuts. Cost performance and comparison with other products, The pricing of this product is good as you are receiving a nicely styled set of shocks with high quality materials being used. Cheaper options are available from other brands but with lower quality materials. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Nicely styled and with some adjustment available
About quality and texture, I can confirm that the quality is great and that the material used is steel with a mixtures of chrome plating for the shock body and gloss black powder coating for the springs. About the feeling of use, I am excited to now have adjustment available via the 5-way preload collar for when adding additional weight and they are nice and simply styled to match the overall original look of the bike. Products to buy together, A fork spring upgrade would also be ideal to add to your cart to make the bike more useable in all riding conditions. Difficulty of installation, I can say the fitment of the rear shock absorbers was very easy due to the simple nature of the task and ease of access to the mounting nuts. Cost performance and comparison with other products, The pricing of this product is great as you are receiving a nicely styled set of shocks with quality surface finishes. Other popular brands also start their line-up with similar pricing and features. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
สินค้าใส่ได้อย่างพอดีสวยงาม View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
สวยงามโดดเด่น เงางามดูแลรักษาได้ง่าย View detail
Fits: HONDA BROS650, HONDA CB1100, HONDA CB1300SF, HONDA CB1300X4, HONDA CB400 FOUR, HONDA CB400F, HONDA CB400SF, HONDA CB400X, HONDA CB750, HONDA CBR1000F, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR250R, HONDA CBR250RR, HONDA CBR400R, HONDA CBR400RR, HONDA CBR600F, HONDA CBR900RR, HONDA DREAM50, HONDA GROM
SP TAKEGAWA Adjustable Footpeg (for HONDA Vehicle)
quality are good but the design not good. The leg peg has a pin which located on top. when u fix the leg peg onto the socket. the leg peg is at aw ward positon. Unless the leg peg is round then it will solve the issued. most of the position as specify on the instruction manual does not allow the leg peg to be level. always at a angle. View detail
Fits: HONDA MONKEY BAJA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
ดุมล้อกันกระชาก takegawa อันนี้รถแรงๆแนะนำว่าต้องใส่ครับ ช่วยลดการสึกหรอของสเตอหลังได้ดีครับ ขี่นุ่มนวลข้น View detail