Reviews
Fits: HONDA CB50JX-1, HONDA CRF100F, HONDA CRM50, HONDA CRM80, HONDA CY50, HONDA GROM, HONDA JAZZ, HONDA MB50, HONDA MBX50, HONDA MSX125, HONDA NS-1, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA Solo, HONDA XE50, HONDA XE75, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CHALY 50
I guess I could have raised it another T.
I bought it to raise the front sprocket by 1T because my old moped had power and would dip down. I was able to install it without any problems. After driving it, I thought it would be a good idea to raise the front sprocket by another 1T. View detail
Fits: KYMCO CT125, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA CROSSCUB110, HONDA CROSSCUB110
Well Made
This sprocket is well made and clearly labeled. I believe it is even more precisely made than OEM. The fit was snug but not too tight. View detail
Fits: HONDA CB50JX-1, HONDA CRF100F, HONDA CRM50, HONDA CRM80, HONDA CY50, HONDA GROM, HONDA JAZZ, HONDA MB50, HONDA MBX50, HONDA MSX125, HONDA NS-1, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA Solo, HONDA XE50, HONDA XE75, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CHALY 50
Bolt is required separately for some car models
Since it is a Small Sprocket, a corresponding Bolt may be required depending on the car model.
If you can, you can use the Quantity:I would like you to keep it Set.
View detail
Fits: KYMCO CT125, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA CROSSCUB110, HONDA CROSSCUB110
Recommended for Touring
Changed from 14T in NORMAL to 15T.
The jerkiness of first and second gear is reduced, making it easier to use.
I've heard some people say it's difficult to use because of the lack of Torque when climbing hills.
Downshift and you are good to go.
I think Merit is more likely, so I would recommend it especially for Touring use.
View detail
Fits: HONDA CB50JX-1, HONDA CRF100F, HONDA CRM50, HONDA CRM80, HONDA CY50, HONDA GROM, HONDA JAZZ, HONDA MB50, HONDA MBX50, HONDA MSX125, HONDA NS-1, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA Solo, HONDA XE50, HONDA XE75, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CHALY 50
simply
CUB bought used.
Why did I make a new drivetrain?
No problem.
Safe and stable.
View detail
Fits: HONDA CB50JX-1, HONDA CRF100F, HONDA CRM50, HONDA CRM80, HONDA CY50, HONDA GROM, HONDA JAZZ, HONDA MB50, HONDA MBX50, HONDA MSX125, HONDA NS-1, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA Solo, HONDA XE50, HONDA XE75, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CHALY 50
New for now.
I bought a used SUPER CUB with about 1000 km.
To renew the entire undercarriage.
The same number of Sprocket was purchased.
New and safe.
Stable at Mukawa.
View detail
Fits: HONDA CB50JX-1, HONDA CRF100F, HONDA CRM50, HONDA CRM80, HONDA CY50, HONDA GROM, HONDA JAZZ, HONDA MB50, HONDA MBX50, HONDA MSX125, HONDA NS-1, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA Solo, HONDA XE50, HONDA XE75, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CHALY 50
Stable and secure
Chain was replaced and Sprocket was also replaced at the same time.
Keep the Size out of the way.
The peace of mind of a new product and the trust of the Manufacturer.
View detail
Fits: KYMCO CT125, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA CROSSCUB110, HONDA CROSSCUB110
I changed it to 15T.
I chose this one because it seems to be more accurate, although it is a little more expensive than other products often selected on YouTube.
I am satisfied with the 14→15T because there is a large difference in sound and vibration from 60km/h. I am also satisfied with the 14→15T.
On uphill slopes, I sometimes feel that the Torque is less than NORMAL, but I have no complaints as long as I can Downshift.
Don't forget to replace your Guide plate when you exchange!
View detail
Fits: HONDA NS-1, HONDA MBX50, HONDA MSX125, HONDA MB50, HONDA GROM, HONDA JAZZ, HONDA CRF100F, HONDA MONKEY R, HONDA MONKEY, HONDA CD50, HONDA BENLY90S, HONDA BENLY90, HONDA BENLY50S, HONDA CY50, HONDA CRM80, HONDA CRM50, HONDA DREAM50, HONDA DAX70, HONDA DAX50, HONDA GIORCUB
I made a mistake.
I bought two by mistake.
I'll keep it as it is because it's cheap with Point use and it's a pain to return it.
Good product. The accuracy is high and Cost performance is also high.
View detail
Fits: HONDA NS-1, HONDA MBX50, HONDA MSX125, HONDA MB50, HONDA GROM, HONDA JAZZ, HONDA CRF100F, HONDA MONKEY R, HONDA MONKEY, HONDA CD50, HONDA BENLY90S, HONDA BENLY90, HONDA BENLY50S, HONDA CY50, HONDA CRM80, HONDA CRM50, HONDA DREAM50, HONDA DAX70, HONDA DAX50, HONDA GIORCUB
Installed on SUPER CUB 50FIAA01
I changed from OEM 13T to 12T. I think I set it to accelerate more, but there is no large change, and there is a feeling that I can pull a little in 1st and 2nd gear. I think the product itself is a good one with high accuracy and no BALI. View detail
Fits: HONDA CB50JX-1, HONDA CRF100F, HONDA CRM50, HONDA CRM80, HONDA CY50, HONDA GROM, HONDA JAZZ, HONDA MB50, HONDA MBX50, HONDA MSX125, HONDA NS-1, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA Solo, HONDA XE50, HONDA XE75, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CHALY 50
The same number of guns as OEM.
Installed on a SUPER CUB 50FI, just remove the Bolt and replace it. It took me 15 minutes to install.
The teeth were getting a little worn, so I replaced them.
Next time I'm thinking of going down one gun to 12 and leaning towards acceleration.
View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
I bought it for the CUB
I bought a Cub Pro that will soon reach 40,000km and I also changed the Chain because it was lazy.
I've driven another 10,000 miles from there with no discomfort and no problems.
View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA XR70R, HONDA CB50JX-1
Comfortable on level ground
I installed WirusWin's Twin muffler on the Grom and changed the output characteristics to 16T changed to the new "C" As a result, 1st and 2nd gear are both great on the flat ground, and 3rd gear is a great way to get to 7,000 rpm It goes around But, on the other hand, it stalls in the late 3rd and all of 4th gear for more than 8 percent of the climbs This is a great part for touring with few climbs This is a great value for the price View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
Review of star 16t takegawa country reviews russia
I bought a 16t sprocket for a Honda-Monkey injector mini-motorcycle. Yes, the front sprocket fits this Honda-Monkey motorcycle. The fi AB27 injector only when attached to the shaft axis has a slight backlash. I would like the following products to be more accurate and of high quality. I bought a 16t sprocket for an injection mini-motorcycle Honda-semolina. Yes, the front sprocket fits this Honda-semifike motorcycle fi AB27 injector only when mounted on the shaft axis has a slight play backwards. translated by Google Translator View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
I love these Takegawa sprockets
The steel type racing sprockets from Takegawa are really awesome. I got a few, and I've been very satisfied with all of them. They are hardcore wear resistance, better than OEM. I always use steel front-sprockets, and when combining the factors weight/durability/price I've found these to be the best option. They also look very good. The latest sprocket I bought is a 16T. The weight included shim is 110g. Can't wait to get this on my bike. View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
BETTER THAN O.E.M. 15T DRIVE SPROCKET
Takegawa STEEL DRIVE SPROCKET RACING TYPE is lighter 102.3g than OEM sprocket 117.2g. Takegawa sprocket is brouder 5.85mm than OEM sprocket 5.75mm. And the Takegawa sprocket also has a smaller bevel at he spline so has more sprocket to countershaft contact area. The Takegawa Drive sprocket fixing plate is extremely inferior, the locking projections on the one suppiled in my kit were almost noexistent, use the OEM drive sprocket fixing plate. View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
This's perfect. I would highly recommend this item to my friends... This product is of the highest quality and fits and works great!!!
This's perfect. I would highly recommend this item to my friends... This product is of the highest quality and fits and works great!!! View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
Attached to CUB90DX
I bought it last time, but change the number and buy again.
Because I became close to Short, although I can use 3rd speed than 16T, 1st and 2nd gear are unsatisfactory.
As it is in the current state it is a good place to go on a city and get on the street, so I will exchange it when I change Bore up and Mission again.
As for the price Front sprocket is cheap and is good!
It looks GOOD!
View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
Attached to CUB90DX
Purchase to change GEAR ratio.
It is one more long than OEM.
EngineOEM, Exhaust System With outside MJN 28 on, Rear runs with 35 dogs and it took about 60 km to 2nd gear.
Just the 3rd speed is gloomy and it is tough on the city ride..
Although I am now returning to OEM Ding, it seems to be just right if I make 5 pedals Mission, Bore up.
View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
It is a very good Sprocket
I bought it because I want to try GEAR ratio in various ways
I thought it was good to make it at the same time
It is made very lightweight, I think that strength and durability are perfect
There are plenty of inexpensive Sprocket, but I think that it is safe made by Takegawa because it is not so expensive
View detail