Reviews
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
Since 15000 was exceeded, it exchanged with the chain. Although it also felt that it used still more, it serves also as the meaning of once periodical maintenance, and is exchange. The sound against which the gear and the chain rubbed became small
Since 15000 was exceeded, it exchanged with the chain.
Although it also felt that it used still more, it serves also as the meaning of once periodical maintenance, and is exchange.
The sound against which the gear and the chain rubbed became small, and after recombination was good!!
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
a cub -- it used for 90CM. In order to reduce from standard number of sheets (39T) to four breath, it was slightly anxious at first. However, the First gear which was not able to be used at all comes to be extended dramatically, and came to be con
a cub -- it used for 90CM.
In order to reduce from standard number of sheets (39T) to four breath, it was slightly anxious at first.
However, the First gear which was not able to be used at all comes to be extended dramatically, and came to be connected very much with a smooth to the Third gear.
It is whether although the maximum high speed is an 80-km stop, its weight has a cause there --
Although it thinks that the elongation of the Third gear fell just for a moment, on the whole, they are very satisfaction and recommendation.
View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
It is exchange in 20 or 000 km from exchange last time. Although he thought that after [ a little ] use could still be used by the grade which the tooth form is transforming, if a new article is used too, sound also becomes quiet and is the highest.
It is exchange in 20 or 000 km from exchange last time.
Although he thought that after [ a little ] use could still be used by the grade which the tooth form is transforming, if a new article is used too, sound also becomes quiet and is the highest.
I also regard the next as choosing this.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X (FI), YAMAHA CYGNUS XSR(FI), YAMAHA CYGNUS XSR(FI)
It exchanged for the weight roller of SP Mukawa. The maximum high speed did not change but the speed at the time of a start became quick overwhelmingly. The start the cygnus was [ the start ] slow in action was canceled, and it is satisfied. I
It exchanged for the weight roller of SP Mukawa.
The maximum high speed did not change but the speed at the time of a start became quick overwhelmingly.
The start the cygnus was [ the start ] slow in action was canceled, and it is satisfied.
It is recommended.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA
I think that a price is also cheap and enough for practical use. Although it is simple, it is liking individually.
I think that a price is also cheap and enough for practical use.
Although it is simple, it is liking individually.
View detail
Fits: HONDA , HONDA Ape50, HONDA Ape100, HONDA XR50, HONDA XR100 Motard, HONDA CRF100F, HONDA XR100R, HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA DAX125
After bore up, although it was 16 dishes for a while, since it is the cheap thing raised to 17 dishes, I think that it is good for being changed freely trying many things.
After bore up, although it was 16 dishes for a while, since it is the cheap thing raised to 17 dishes, I think that it is good for being changed freely trying many things. View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
It was used in order to change a moderation ratio and to suppress acceleration by the benly 50S. Although there is no hole for a weight saving as of April 10, 2009 with the photograph here, there is a hole the normal 42T and like [ company / 30T ] act
It was used in order to change a moderation ratio and to suppress acceleration by the benly 50S.
Although there is no hole for a weight saving as of April 10, 2009 with the photograph here, there is a hole the normal 42T and like [ company / 30T ] actually.
If the engine is normal, a front may not be run unless it can enter 12T.
Since he has not tried except 12T, it is what...... It is necessary to reduce a little chain again depending on the case.
As operative, it is a weight saving of axle part.
The increase in the maximum high speed, reduction of accelerating force.
With it, there is an unexpected thing of becoming difficult to become dirty as operative.
Since the chain case of normal is made according to 42T size, if the chain oil which scattered gaily and was soiling the number plate when normal exchanges for 35T, it is effective in being obstructed by the case and becoming difficult to scatter.
View detail
Fits: HONDA MONKEY BAJA, HONDA CL50, HONDA CD50, HONDA MONKEY R, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA MONKEY RT, HONDA JAZZ, HONDA Benly50S, HONDA MAGNA50, HONDA MONKEY, HONDA 12VMONKEY, HONDA 12VMONKEY
since the two manual strengthening clutch kit disk was slippery, it was alike and changed. Since he wanted to try a different gear ratio although OH could be sufficient, a three-sheet disk was decided on. If there is even a tool, the simplicity an
since the two manual strengthening clutch kit disk was slippery, it was alike and changed.
Since he wanted to try a different gear ratio although OH could be sufficient, a three-sheet disk was decided on.
If there is even a tool, the simplicity and convenience made given the opportunity of an oil change are good.
Since it has not measured by measure, it does not understand, but a weight seldom changes or touch that three sheets were lighter carries out it.
In addition, if it can do, six angles are better than the plate screw of a plus.
View detail
Fits: HONDA SUPER CUB 50, HONDA DAX, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA XR50R (for competition), HONDA SUPER CUB 50, HONDA solo, HONDA GIORCUB, HONDA CRF50F, HONDA Z50R
the worst -- Although the case was taken into pieces once again, the clutch body was also taken into pieces and it saw, since it did not go out .... the accuracy of the case in which a clutch plate did not come out -- it will be bad -- it is in a perfect
the worst -- Although the case was taken into pieces once again, the clutch body was also taken into pieces and it saw, since it did not go out .... the accuracy of the case in which a clutch plate did not come out -- it will be bad -- it is in a perfect adhesion state! Is the product check carried out before shipment??? He does not buy the product of 2 times and Coco. View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
Is reinforcement increasing from the pure thing? Although it is not understood, as for appearance, a division exception does not stick that it is pure. What was necessary was just to have struck the stamp of TAKEGAWA something after ?, if it was bette
Is reinforcement increasing from the pure thing? Although it is not understood, as for appearance, a division exception does not stick that it is pure.
What was necessary was just to have struck the stamp of TAKEGAWA something after ?, if it was better to have used the metal color and to give fashionability. -- Regrettable.
It is a sprocket ordinary functional completely ..
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
If it is the same size, he can buy it cheaper than the equivalent device of a kitaco. since finishing is also Mukawa, it is satisfactory -- it is . In a benly and the bore up vehicle of a cub, I think that it becomes an indispensable size.
If it is the same size, he can buy it cheaper than the equivalent device of a kitaco.
since finishing is also Mukawa, it is satisfactory -- it is .
In a benly and the bore up vehicle of a cub, I think that it becomes an indispensable size.
View detail
Fits: HONDA MONKEY BAJA, HONDA CL50, HONDA CD50, HONDA MONKEY R, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA MONKEY RT, HONDA JAZZ, HONDA Benly50S, HONDA MAGNA50, HONDA MONKEY, HONDA 12VMONKEY, HONDA 12VMONKEY
It included in a 102-cc engine. Care and attachment also of a description were completed satisfactorily. There is also no clutch slipping and it has told engine power firmly. It is satisfied, so that it will pass enough, if it says from a pric
It included in a 102-cc engine.
Care and attachment also of a description were completed satisfactorily.
There is also no clutch slipping and it has told engine power firmly.
It is satisfied, so that it will pass enough, if it says from a price.
View detail
Fits: HONDA monkey, HONDA MAGNA50, HONDA CD50, HONDA CL50, HONDA Benly50S, HONDA JAZZ, HONDA 6V DAX, HONDA MONKEY BAJA, HONDA 12VMONKEY, HONDA 6VMONKEY, HONDA 12VMONKEY, HONDA MONKEY R, HONDA MONKEY RT
It attached to monkey R stage 88cc. Although the strengthening clutch of a certain company was attached before, since the allophone carried out, made in Mukawa was used. It is very quiet and satisfied.
It attached to monkey R stage 88cc.
Although the strengthening clutch of a certain company was attached before, since the allophone carried out, made in Mukawa was used.
It is very quiet and satisfied.
View detail
Fits: KAWASAKI KLX110, KAWASAKI KSR110
It exchanged for the occasion which carried out bore up. I think that it became six from four and became the clutch work made into the snap. It becomes hot that some difficulties become heavy and a clutch grasps them.
It exchanged for the occasion which carried out bore up.
I think that it became six from four and became the clutch work made into the snap.
It becomes hot that some difficulties become heavy and a clutch grasps them.
View detail
Fits: HONDA CD70 (BENLY50), Others , YAMAHA YB50, YAMAHA YB-1 FOUR, YAMAHA YB-1, YAMAHA V80, YAMAHA V50, SUZUKI BIRDIE50 DX, SUZUKI COLLEDA SPORT, SUZUKI COLLEDA SCRAMBLER, SUZUKI WOLF50, SUZUKI WOLF50, KAWASAKI KX85, KAWASAKI KX80, KAWASAKI KX80 II, KAWASAKI KX65, KAWASAKI KX60, KAWASAKI KSR110, KAWASAKI KSR-1, KAWASAKI KS-2
It was used in CD50. Since it changed and the engine could have been blown immediately, the sprocket of order was exchanged, but since die length changed on that occasion, it equipped with a new chain. If die length (the number of links) is correc
It was used in CD50.
Since it changed and the engine could have been blown immediately, the sprocket of order was exchanged, but since die length changed on that occasion, it equipped with a new chain.
If die length (the number of links) is correct, a joint is exchangeable even if there is no special tool, since it is a clip type.
A chain cutter is needed when die length is different.
Having chosen this chain has new appearance at gold & Black.
The amount of money is not high to there, either.
The best for high power vehicles, since plate thickness etc. are thickened and chain strength has risen.
It chose by saying.
View detail
Fits: HONDA NS-1, HONDA NS50F, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE TypeD, HONDA APE 100 TypeD, Others
It is used for NSF100. Since many things are tried according to a course, the product made from steel which cannot decrease easily is recommended in the beginning!
It is used for NSF100.
Since many things are tried according to a course, the product made from steel which cannot decrease easily is recommended in the beginning!
View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
At the time of the ape 50 and engine system full normal It raised from pure 14T 2T. if pure, a gear chain comes out busily, and, at a low speed, comes loose, and it was hard to operate it, but it came to ride on the speed without having progressed
At the time of the ape 50 and engine system full normal
It raised from pure 14T 2T.
if pure, a gear chain comes out busily, and, at a low speed, comes loose, and it was hard to operate it, but it came to ride on the speed without having progressed to the smooth also at the time of a start and a gear chain's also carrying out it not much by having changed the sprocket.
Moreover, it accelerates to touch to fully pull by 2 and a Third gear.
Since a price is also handy, we recommend you purchase by all means.
View detail
Fits: HONDA SUPER CUB 50, HONDA DAX, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA XR50R (for competition), HONDA SUPER CUB 50, HONDA solo, HONDA GIORCUB, HONDA CRF50F, HONDA Z50R
Since the normal clutch had been slippery, it exchanged, but in the direction where a plate is set to incorporated ASSY, and it is exchanged by itself since it is this price, it is a recommend. There is no fault to the extent that, as for the touch wh
Since the normal clutch had been slippery, it exchanged, but in the direction where a plate is set to incorporated ASSY, and it is exchanged by itself since it is this price, it is a recommend.
There is no fault to the extent that, as for the touch which rode after exchange, the pedal became heavy a little at the time of a shift change.
However, since the description of Mukawa also has few photographs at black and white, beginners consider it securer for there to be reference books, such as a service manual.
The holder of a clutch lock nut and a baffle is needed for exchange.
View detail
Fits: HONDA , HONDA Ape50, HONDA Ape100, HONDA XR50, HONDA XR100 Motard, HONDA CRF100F, HONDA XR100R, HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA DAX125
Attachment was easy as it merely exchanged for brand-name parts. Possibly 16T was better for the ape 100 of normal.
Attachment was easy as it merely exchanged for brand-name parts.
Possibly 16T was better for the ape 100 of normal.
View detail
Fits: HONDA MONKEY BAJA, HONDA CL50, HONDA CD50, HONDA MONKEY R, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA MONKEY RT, HONDA JAZZ, HONDA Benly50S, HONDA MAGNA50, HONDA MONKEY, HONDA 12VMONKEY, HONDA 12VMONKEY
In order to compensate the capacity lack of a normal clutch in connection with bore up. A TAKEGAWA strengthening clutch kit. When exchanging for the product made from external the friction disk and spring which became below half the sum by price r
In order to compensate the capacity lack of a normal clutch in connection with bore up.
A TAKEGAWA strengthening clutch kit.
When exchanging for the product made from external the friction disk and spring which became below half the sum by price reduction [ if a price is considered although the remains of processing of a gear are less than brand-name parts, several years before not being worrisome at all ], the quality of the purchased product this product.
If the purchased direction calls it the problem which thinks absolutely is profitable, we will be only that it is a clutch of a primary side too, and its weight, or this product whose cost performance is very high will be recommended.
View detail