Reviews
bright
If it was so bright, I wondered why I hadn't put it on sooner.
The brightness is perfect, but I had to buy a Crimp Tool for the Bullet Terminal, and the Crimp did not work well, and I am a novice at installation.
It would be even better if Wiring would sell it complete, even if it costs a little more.
View detail
Fits: KAWASAKI KLX125, KAWASAKI KSR110, KAWASAKI Ninja250R, KAWASAKI KSR110, KAWASAKI D-TRACKER125, KAWASAKI KSRPRO
Can be attached to VULCAN400S.
Installation
Dedicated to a few comrades, the VULCAN400S Blinker is a ninja250r (2008-2012) The same parts can be installed without any modification.
However, it takes some time and effort because you have to remove Headlight and Rear Fender after all.
Also, I was troubled that the Bullet Type Terminal of Sub harness was very hard. Is it like this?
[Regarding the clarity of the Instruction Manual.
There were some impressions that the Instruction Manual was difficult to understand, but I think it is easy enough to understand compared to the ones that only show pictures of foreign countries. I didn't have any particular problems.
[Try it.
I am satisfied with the look of the product, as it turned out almost exactly as in the Image.
Well, after all, if you're going to go through the trouble, wouldn't it be better to use LEDs? I can't really argue with that.
View detail
Fits: HONDA Dio110, YAMAHA CYGNUS X, Others , YAMAHA BWS125
For VSTROMSXBlinker Valve replacement
I purchased SP Mukawa's Plating Valve to fix the orange bulb that I could see through the OEM Clear Lens. The only thing I was worried about was the amount of light, but it is sufficient and looks Refreshing! View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50
I have tried to install it on the CUB but...
I was given a pair of Smoke Blinker Lenses and installed them, so I purchased these lenses for a sense of unity and dress-up.
When the car stops, everything is [Color] Smoke gives a sense of unity and enhances Parenthesis.
However, unlike the Blinker, the Motorcycle's BrakeLight lights up along with the Headlight when the key is turned on and the Engine is ignited.
Although it was darker than OEM, it wasn't as disappearing as the car, so it was half as effective...
In the strong light when I put Brake on, it looks more like Pink than Red...
I guess I was a little disappointed for the price.
However, since it is a Mukawa, the texture and precision of the objects are unquestionably good.
View detail
UniversalBlinker.
I purchased the Jixxer 250 for rounding Light.
I wanted to create a Retro feel, so instead of the sharp Type of LEDs.
We went with the old-fashioned Light Bulb Type.
I felt the kindness of the Manufacturer in the 10W and 15W bulbs included.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Used for CUB90
CUB90 is equipped with external Tachometer, various sensors, USB power supplyCoupler, and LED on the Tail to reduce battery load.
The bulb power consumption of the NORMAL is 15W/8 and the LED is 21W/5. The LED is not labeled in Lumen so I did not know how bright it was but I trusted Brand.
The large size is a little smaller than a light bulb, the bracket is in good condition and the tail lens has not been hit.
I read that it was a little dark in the impressions, so I cleaned the tail lens and put aluminum tape on the tail case, which is an old-fashioned way of doing things.
The Tail Chica-Chica is a little bit when the Idling is on. Stop-lamp is powered by battery, so it does not ChicaChica. The light is bright enough to pierce your eyes at some angles.
When the Lens is turned on, the ChicaChica of the Tail is not felt. The brightness of the Tail is about two-thirds that of the bulb, and the Brake is about the same or slightly stronger than the bulb, which is fine.
Tail is AC so ChicaChica is not an option but I don't know how it is for the life of the LEDs. I have been using it for about 6 months and so far no problems. I remove the Lens every once in a while, but it is not burnt or deformed.
After installation, the charging voltage did not change during idling. Battery load seems to be decreasing. I think it can go as it is.
View detail
Blinker Bulb of a bygone era
Ordinary Blinker Bulb being eclipsed by LEDs View detail
Fog Lamp installation.
I installed it to supplement the Headlight. This is a Large Variant value for money product. It is bright and reliable. I am very satisfied with the product and the workmanship. View detail
Fog Lamp installation.
I installed a Fog Lamp on my CT110 HUNTER CUB to help with the lack of Yellow dragons in the headlight. This is a great deal for the Large size. It's great! It was good for safe driving and peace of mind. I am glad that I found the installation manual. View detail
Bright!
I thought I didn't need it because I don't run at night. I have two 6.5W lamps, but they are bright! I am satisfied with it, although I use it infrequently so far. I am not sure about the durability yet. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
good-looking
As for brightness, I did not find it too dark as others have mentioned. The power consumption is quite low, as LEDs are the only light source. I don't know about durability as I just installed it. It works well. View detail
Compact and good visibility! Recommended!
It is just as the title says. Anyway, Small, Compact size, and good visibility!
When it comes to custom blinkers, there are many products that are good looking but have poor visibility.
This product is Level with better visibility than OEM Product's Blinker…
It's also recommended for long touring as it's hard to hit when you fall over! (On the go)
(It would be unfortunate if the Blinker were to be mogged…)
View detail
Fits: HONDA DREAM50, HONDA JOKER Helmet, HONDA Byte, HONDA ZOOMER, HONDA APE 50, HONDA APE 100, HONDA GORILLA, HONDA MONKEY
SP TAKEGAWA Blaze Tail Lamp
About quality and texture have a good overall finish About the feeling of use be bright in color Products to buy together If you want it to be brighter, I recommend LED Difficulty of installation easy, simple Cost performance and comparison with other products It's brighter and clearer than the standard About shipping and packaging The packaging is always meticulous The delivery took a week Any concerns, cautions, or advice when purchasing Because it is brighter than the standard, I think you can see it well from the back Standard was dark and worried when driving at night View detail
VERSYS-X 250 Used front and rear
I was looking for a Light Bulb Type instead of LED and I found this product.
If used on the Front, the Lens part is about 1/3 hidden by the Cowl, so there is a possibility of malfunction. After installation, I could confirm that the lights work fine, and the Rear can be used without any problem.
The OEMBlinker is no longer available, so Wiring was reused and installed.
KIJIMA or DRC flasher holder plate is required for installation.
The front side can be installed without removing the cowl, but it is easier to remove it.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA APE 50, HONDA Ape 100 Type D, HONDA Ape Type D
a form says -- it is -- it is of the same type as this, and LED -- it is quite structure although I want you to carry out
a form says -- it is -- it is of the same type as this, and LED -- it is quite structure although I want you to carry out View detail
Fits: Others , HONDA Giorno, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MAGNA 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA GIORCUB, HONDA DREAM50, HONDA DAX, HONDA Byte, HONDA TODAY, HONDA TODAY
It was attached simply.
It was attached simply. View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
Cheap, but functional!
[How is it used?
I purchased this product to install a Blinker on a Front fork.
Was the one you received as per Image?
Material:It is aluminum and a little cheap, but functions fine.
Was the installation difficult?
It might be dangerous if you don't remove the Fork, but if you don't mind the distortion, Material:The aluminum material can be attached to the Fork by bending it as much as you like.
How was your experience with it?
It is surprisingly durable and has over 2000 km on non-Trouble.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
Not particularly
If you want to change the material frequently, you can recommend a different bracket.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSSCUB110
It's bright.
The other night, while driving on a dark mountain road, I felt it was a little dark with only the OEM Headlight. After looking at various products, I bought this product. The instruction manual was very helpful and easy to understand, and the wiring was easy to install with only the Bullet Terminal modification. I tested the product at night and found it to be very bright and the illumination range to be very wide. I need to adjust the optical axis a little more, but I am satisfied with the product itself. I felt that it is indeed a first-class manufacturer's product. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA DAX, HONDA LITTLE CUB, HONDA LITTLE CUB
I am satisfied with the product.
I have no complaints about the product.
However, I was very disappointed when I received a notice that the order could not be shipped on the same day after I placed the order.
It would look better if you changed the Blinker lens along with the Tail lens!
View detail
Fits: HONDA ZOOMER, HONDA ZOOMER, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA APE TypeD, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA GORILLA
Slightly expensive but luxurious
I had no complaints with the OEM, but I took the plunge and installed the LED light. The packaging and details were very well made, as expected from a top brand in the mini bike world. The photo was taken in the evening in a dim light. The light is slightly Pink with White mixed with Ring shape. In my experience, I have not seen this kind of light on big bikes.
When installing, do not forget to install the OEM rubber packing as described in the Instruction Manual.
View detail