Reviews
Fits: HONDA Ape50, HONDA Ape100, HONDA Ape50, HONDA Ape100, HONDA Ape50, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
Simple and good.
I think it's expensive to be honest, but there is no other light bracket for 30φFork that is as simple as this one, so it's for those who want to refreshing.
I can't install it without taking off the Top Bridge, but I just have to endure the installation once because the split type Light Bracket is too messy. In a way, it's better than the separate type because it doesn't let garbage and rain in.
View detail
Fits: HONDA Super Cub 50, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110
It makes quite an impression
Just by removing and replacing the OEMBlinker, it becomes a stylish CUB. (Valve in Orange color was also included.)
The front OEM blinker was hard and difficult to remove. The front OEMBlinker was hard and difficult to remove. There may be individual differences, but…be careful not to scratch the body.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
Light Bracket exchange
When you put on the Screen
I felt like the balance in the front was broken.
Replaced to increase Plating allocation.
I'm getting closer to my ideal.
Since the quality is Mr. Mukawa.
I'm pretty sure it is;
The only Neck is the high price.
View detail
High quality with aluminum body
The JC92 Grom uses LED lights, but only the Blinker uses Halogen lights, which made me feel uncomfortable.
I felt that the design was still prioritizing low cost, so I considered changing to LED.
After much research, I chose Takegawa for its compatibility and quality.
The result is Large satisfaction.
The Japanese specification Grom also lights up the position as it is.
Body is Material:Black Anodized Aluminum with Material at the base of the mount.:Rubber reduces vibration.
A plate is also included to hide the large hole left in the body when replacing the OEM Blinker. This plate is also cut out of aluminum and has a black anodized treatment.
The replacement work can be completed in about one to two hours if you read the instruction manual carefully beforehand and have the corresponding tools.
I also worked on the Fender Eliminator Kit at the same time, so it took a little longer.
The License Plate Light is not an OEM replacement, but comes with a SMART Small Type LED light. Therefore, some wiring modification will be required.
The Electro Tap is included in the kit, but I modified the Bullet Terminal in consideration of the possibility of removing it later.
In general, the quality was good enough to justify the high price.
However, if it was a little more Reasonable, I would have been even more Large satisfied.
The only thing is that it also comes with an LED-enabled Relay, but its Material:The RubberMount comes with a 90-degree gap in the direction of the mount, and the OEM mount is the same type that faces the same direction, so I used the OEM mount instead of this one.
View detail
Fits: HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MONKEY125, HONDA MONKEY125
bright
I was shocked at the darkness of the headlight of the MONKEY125, but I can feel relieved after installing this Fog Lamp by Mr. Takekawa. View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
To Our Safety Riding, Bright the Light!
ENG: This is most easy way to your bike Bright Tail light bulb why dont you try this more Bright then original bulb, more anti biverate worry, and less use voltage be advice... if you install this bulb and test the stop swith from right handle lever and foot brake pedal, if its not working, try up-side-down install then its working i was embarrassed ... haha KOR: Takegawa LED bulbs. The LEDs are white anyway, because the tail light itself is red, so it shows a bright red light, but thanks to the white light in between, it acts as a license plate light and is very bright. It will work. It probably has polarity. There is no fear that the filament of a typical halogen light bulb will break due to the vibration of a motorcycle. View detail
It's bright.
It's too bright.
Personally, I also think it could have been a little more understated.
It seems to bother him when he gets dazzled...
I think you will be satisfied with the price.
I think it will be a confirmation of durability etc. in the future.
View detail
The Lens has been removed. Can you help me with the warranty?
I have no problem installing it, but...
Lens came off during use.
View detail
annoyance of oncoming traffic
It is only called Fog Lamp because Cutline is not included.
It's like Driving or Spotlight.
If you don't lower the optical axis enough, it will become a Large nuisance for oncoming cars.
At first, I was going to use it as an auxiliary light for low beam, but now I use Relay to link it with high beam because it becomes a large nuisance for other cars.
View detail
annoyance of oncoming traffic
It is only called Fog Lamp because Cutline is not included.
It's almost like Driving or Spot.
If you don't lower the optical axis much, it will be a Large nuisance for oncoming cars.
I gave up on using it as an auxiliary light for low beam and used Relay to link it to high beam.
View detail
a good product
I got a good product at an affordable price. I use it for monkeys. White LED looks so good on white products. It feels analog, so I prefer this analog product to digital products. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Contact failure occurrence
I bought it in 2015, when was that?
I noticed that it was not lit.
When I looked at it, I saw that the contact point of the base was gapped.
I put it back in the bulb.
It's too sad to throw it away like this (laughs)
Recheck the status.
If you turn the base, it will fit at the contact point.
There's a rattle or a wobble or something.
I fixed it with Epoxy Glue (lol) and it stopped moving.
Motorcycle is also a Regulator issue.
I don't plan on going LED any more than I have to.
Let's use what we have.
Ordered another one to use on my MC19 or 1KT (lol).
They both have a W in Tail.
But this time, I'll use Epoxy to harden it beforehand (laughs).
View detail
Fits: HONDA Ape50, HONDA Ape100, HONDA Ape50, HONDA Ape100, HONDA Ape50, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
APE 100
Used for APE 100
Well made and very nice construction.
Because it fits from the top of the Inner, it is possible to remove the Stem and make it bare.
Installation and removal is troublesome, but adjustments can be made later.
View detail
I like it a lot, but I don't think you can avoid annoying oncoming traffic.
I like the texture and the weight of the product.
In addition to not being conspicuous so much with Small Type, I thought that it was also good that One Side about 6.5W is considerably power-saving.
In spite of this size, it illuminates a wide area around the undercarriage which is not reliable with OEMLight.
I think that the other party is dazzled even if the irradiation range is very wide and it points down considerably though it is for the oncoming car.
I thought it would be almost impossible to adjust the optical axis without causing problems …
I live in the countryside in Hokkaido, so there are many roads with no lights or oncoming traffic, which is very helpful for night driving, but if you don't, I think you should buy a product that has Cutline.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA GROM, HONDA GROM, HONDA REBEL250, HONDA REBEL500, HONDA NC750S, HONDA NC750X, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X
The one that doesn't get hooked when working...
I bought this to replace the Blinker on my NC750x 2018 MODEL.
I'd like to have other people's photos for the exterior look and feel, and I'd like to write a working HANG.
First the OEM Blinker Cover (Yellow color) with a Phillips screwdriver.
When you remove the Cover, you will see a transparent Blinker bulb.
There is a hang to remove the Valve, push it in and turn it counterclockwise to remove it, it's a little scary because it touches the Glass directly, but don't be afraid to push it in and turn it counterclockwise to remove the Valve smoothly.
There are some points to note when you install the Blinker bulb from here.
The shape of Blinker bulb is different between Front and Rear, Front has two contact points behind the Valve and Rear has one contact point. If you make a mistake here, the Valve will never fit. I struggled for an hour without realizing this.
Finally, the hang when putting on the Cover, there is a nail on the outside of the Blinker cover, put the nail in and then put the whole thing in. If you don't put it in tightly, it will cause rust and fogging inside, so please don't compromise and do your best.
Finally, we close with Driver.
View detail
Fits: Others Universal DC12V car (T10 Wedge compatible), HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, SUZUKI Gixxer, SUZUKI Address125, SUZUKI GN125-2F, YAMAHA CYGNUS X SR, YAMAHA NMAX , HONDA GROM, HONDA MSX GROM, HONDA LEAD125, HONDA LEAD125, YAMAHA XSR125
Safe products
The price is high, but it is reasonable because it has a good Manufacturer warranty.
Can't complain about the quality!
View detail
To make it a little less grasshopper-y.
We said goodbye to the New Model Grom's grasshopper tentacle-like Blinker.
I was curious about the large Blinker that is disproportionately large for the vehicle size both front and rear.
I thought the front blinker was too big when I was driving, so I changed it to a slim one.
The front can use the included Blinker mount as per the instruction manual, but the rear has been replaced with an Endurance Fender Eliminator, so the Blinker mount was not used and it was installed directly. (Confirmed with Manufacturer)
The work itself took less than an hour.
The Front is still insect-like, but I'm satisfied that the Rear is pretty cool.
The illumination of the front position and the blinking illumination when the blinker is activated are both bright, and the visibility from the car seems to be good.
The most difficult part of the installation was getting the Wiring from the Blinker through the High Nut.
The Instruction Manual says to pass one pc at a time, but I had a hard time because the WiringBoots were in the way.
I wonder if it would be possible to work Smooth if I had the length of the power supply and Grounding Wire changed a little.
View detail
Fits: KAWASAKI KLX125, KAWASAKI KSR110, KAWASAKI Ninja250R, KAWASAKI KSR110, KAWASAKI D-TRACKER125, KAWASAKI KSRPRO
Expected
The quality is perfect as expected.
It can be installed without any processing.
The only MinusPoint is that Wiring is too long.
When I put the excess length of Wiring behind the Light, it got caught in the Handlebar Lock and partially broke.
I recommend trimming the length of the excess.
Or, if that's too much trouble, it's better to use Tie Wrap etc. to fix it tightly.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Replace Stop-lamp with LED
I replaced the Stop-lamp on my 2004 LITTLE CUBCarburetor Vehicles.
When I noticed that the Position was not lighting up, I had a Motorcycle shop look at it and they said that there is a difference between AC and DC, so just replacing it will not light up the Position.
I asked him to tweak the Wiring around the Battery and it lights up fine.
The length of the Lamp insert is too long, so it doesn't fit the Snap and I was worried that it might come off wobbly.
If you stick it with Vinyl Tape or leave it as it is and a problem comes out, if you replace the insertion port of the LITTLE CUB side, it will be Large durable.
I think it's a bit dark, but I'm no longer worried about the ball breaking, so we'll see.
View detail
Fits: HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50
I'm in trouble.
Quantity of Fog Lamp2 pcs:Even though it's a set.
Bullet Type Terminal of Switch was for 1pc.
View detail