Reviews
Repair Parts was a great help!
I broke and obtained the already discontinued Square LCD Speedometer & Tachometer's Gold Genus Reactive Speed Sensor.
I am glad to hear that you are now safely posting speeds.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125
Simple and multifunctional
I purchased the car before delivery of my JA65 and had it installed at the Shop and delivered.
I guess the Tachometer will increase the Tension.
Gear position is still displayed with a 1TEMPO13 delay, but once you get used to it, it doesn't bother you so much.
The Temperature Sensor is currently used for air temperature, but I would like to buy a dedicated Drain bolt to measure Oil Temperature Meter eventually,
Overall, I am satisfied.
View detail
Takegawa super multi TFT meter
The installation manual is in Japanese, so it requires some interpretation, and the photos in the manual are blurry and difficult to distinguish.
It is not very difficult to remove and install the existing product on the actual bike.
I think even beginners can install it on their own.
Among Monkey 125 instrument panel products, its performance is expected to be by far the most overwhelming. -------------------------------------------------- -------- There is a manual for mounting in Japanese, which requires a little interpretation, and the photos of the manual are blurry. It is not very difficult to remove the existing product from the actual bike. It is thought that even beginners can be equipped with self. Monkey 125 dashboard products are expected to be overwhelming. Powered by Google Translator
View detail
Shipping costs are high.
The shipping cost was 500 yen for an item that could fit in an envelope, which is a rip-off. I wanted to buy it somewhere else, but I had to buy it because there was a Point that was about to disappear. There are some air bubbles in the corners, but they are easily removed with Microfiber Cloth. Place it where it will not be disturbed. Takegawa. I like the logo. I think it is better to put it on as soon as you buy Motorcycle, like a protective film for your cell phone. I had to wait two weeks to get it, but I can recommend this product. If you can buy it cheaper from other companies, I think it's better to avoid buying it here, where they charge 500 yen for shipping. View detail
Good flim
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
It's a good one, but the cad has been yadda yadda.
MeterThe name "Mukawa" is on the place where it might be hidden if it were attached.
Material:Stainless Steel, a little rough cut, might bother some people?
I was worried about the curds, so a little yas yas.
Sticker is also available in the contents.
It's just that you can't find it anywhere in Site, and that's why it's dimensional.
No overall length because I think it's a bending assumption. (Don't tell anyone that I didn't include it because it was ambiguous due to Caliper's Size.)
I'm sure it varies from person to person, but just as a guide ….
Hole diameter 10.6mm, hole circumference 17.8mm
Meter paste position
Width 43.9mm Height 27.9mm Thickness 1mm
View detail
Easy installation with pon
I had a hard time to make it fit nicely because the connecting Cable is too long to store the Wiring from Coupler to Meter which is connected to OEMCable. View detail
An Appreciating the use of the Tachometer on the CT125
About quality and texture: I am happy with the quality of the small DN tachometer kit from SP Takegawa. Stainless steel housing with a black instrument face, analog RPM needle and white LED backlighting. About the feeling of use: This tachometer displays so much more then just the engine speed. A compact unit that allows you to continue to use the OEM Honda speedometer. Products to buy together: The SP Takegawa engine drain bolt would also be desirable to purchase alongside the small DN tachometer kit so you are able to display the engine oil temperature from this location and should really be included in the kit. Difficulty of installation: The process to install takes about about two hours. The mounting bracket needs to be attached to the speedometer mounting point, the headlight bezel needs to be removed to access the electrical connectors, you needs to run wiring for the engine speed and temperature signals and then mount the tachometer and connect the wiring. A little difficult to do. Cost performance and comparison with other products: Good costing as you are getting a well featured and stylish design tachometer but not quite matched to the CT125 as compared to the tachometer from Daytona that is cheaper to purchase and looks better fitted to the CT125 but lacks features. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: One feature that you may like to have but it missing from this product is a gear indicator which can be had with the super multi DN meter from SP Takegawa but at a higher cost and removal of the OEM Honda speedometer. View detail
Fits: HONDA CROSS CUB50, HONDA CROSS CUB, HONDA CROSSCUB110
Tachometer is not enough without it!
I wanted a Tachometer, so I bought it. 3 types of Meter are sold by SP Mukawa, and I was not sure which one to choose, but I am glad I bought the one without LCD because the MeterSize is too small. I think the LCD part is probably too small to see. I asked a motorcycle shop to install the meter because I needed to remove exterior parts for wiring and there was a possibility that I might put a wounder on the meter if I did it by myself. I could see how many revolutions the car was making and I could rev the car higher than before I installed the wiring. I think I can now pull with more confidence. View detail
SP TAKEGAWA Bracket For Compact LCD Meter
About quality and texture It was smaller than I thought, but it's okay About the feeling of use The angle didn't come out to install it where I thought it would be Products to buy together SP TAKEGAWA Compact LED Thermometer With Stick Temperature Sensor Product # 05-07-0004 Difficulty of installation easy Cost performance and comparison with other products We need to find products that are similar in price to other companies and fit our bike About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing The composition contains a VELCRO with a bracket and double-sided tape, which allows it to be attached to the temperature gauge or bolt gauge, but as mentioned above, it was a little disappointing because it was smaller than I thought and had limitations in installation View detail
Used for Tachometer of CB50JX
Used to divert a CB50JX Tachometer to an XLR80R.
The pitch for both the meter and bracket is 4.5 cm, which is just right, but the hold section of the CB50JX Tachometer is a half screw and the screw section and straight section have different diameters, so a little ingenuity was needed in the installation.
When we used a collar that goes through the hole in the cushion rubber, it interfered with the Straight part of the MeterHold. Therefore, we intentionally fitted the cushion without using a collar, and it fits just right.
However, the hold section of the Meter in Mukawa is horizontal, whereas the CB50JX is vertical, so the Meter is rotated 45 degrees when fixed to the handlebar.
The product itself is of good quality, even the Hexagonal Wrench is included.
View detail
Although there were the same goods also as a kitaco, since surface texture was disagreeable, the takegawa was used. Appearance is O. It just said that it was not too bad.
Although there were the same goods also as a kitaco, since surface texture was disagreeable, the takegawa was used.
Appearance is O.
It just said that it was not too bad.
View detail
well-made
I bought it to relocate the meter. The meter is also in Mukawa, so I just popped it in. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Tachometer from SP Takegawa
* About quality and texture, The stainless steel bezel matches up with the OEM Honda guage but the orange LED backlighting does not which is a shame and that is why I have only given it 4 stars. * About the feeling of use, The OEM Honda guage is lacking in features and with the addition of this tachometer I now have everything I need to keep me happy while riding. The RPM reading and the clock are my favourite features. * Products to buy together, This tachometer has the ability to display a temperature reading with the parts included in the kit but if you would like that temperature reading for the engine oil you will need to also purchase the SP Takegawa drain bolt which has a recess to secure the temperature sensor. * Difficulty of installation, The installation is quite involved with the running of wiring, disassembling the headlight to install the mounting bracket and connect the wiring and finally the setup procedure of the tachometer. The process was completed in 90 minutes with some difficultly. * Cost performance and comparison with other products, Not many options from other brands but SP Takegawa have a few different versions available now, all around the same price. For a part that offers so many additional display features I find the pricing to be good and worth the money. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, I bought this tachometer early on and now SP Takegawa have a version better suited to the Monkey 125 with a low RPM scale and a LED backlight that matches the OEM Honda guage. Use the product reviews to assist in making a decision on your purchase. View detail
Fits: HONDA MONKEY, HONDA APE TypeD, HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE 50, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
Fitted on CRM250AR, modern Meter
There are four OEMIndicators for the CRM250AR, and it was difficult to find one that would fit on the external Meter.
We decided to cut off only the Speedometer section.
In this case, the Meter's large size (diameter) would be limited, so we decided to use this product, which is as large as the OEM and has a high functionality.
It was much more visible than the OEMMeter, and incidentally, it was better because it had a Tachometer.
For some reason, the Tachometer display sometimes became unstable at high RPM.
(I had no problem with other Tachometers)
Switching between displays can also be done via External Switch, which was very easy to operate.
View detail
SP TAKEGAWA Super Multi DN Meter
After unboxing before installation, the manual is in Japanese (it would be nice to have an installation video on YouTube if you do not ask for at least English or other languages), so I do not know when it will be installed, but it does not look completely difficult to install someday, but it is unfamiliar. After unboxing before installation, the manual is in Japanese (it would be nice to have an installation video on YouTube if you do not ask for at least English or other languages), so I do not know when it will be installed, but it does not look completely difficult to install someday, but it is unfamiliar. View detail
For AF meter installation
I purchased this for AF meter installation on Mirror Screw, and it is convenient because the angle can be adjusted at the bracket. I wish the bracket part was a little longer because of the design of the Mirror I have attached to it. View detail
exchange
I was looking for Repair Parts and found this one.
I would have preferred LampSingle Body, but it didn't seem that expensive.
Replaced with a new one, lighted, Single Item was sold, which was a great help.
View detail
Material:Stainless SteelMeter Bracket
This is a bracket for a regular CompactMeter.
There is a hole for fixing the M10Bolt.
with double-sided tape.
I used it to fix the old Mukawa Oil Temperature Meter.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA SUPER CUBC125, HONDA MONKEY125
Replacement of the old Takekawa speed sensor
With the old Takekawa speed sensor, the OEM discMounting bolt on the rear was restricted, the parts around the rear axle increased, and there was a demerit that the service coupler was always used.
It is supposed to be simple, using the application to convert the signal from the OEMSensor and send out a signal that matches the current situation, so wiring is also simple, just interrupting the two OEMCouplers.
The body also fits inside the small side cover, but the direction of the sensor is specified to prevent water intrusion, so be careful when fixing it.
I cured it with insulating tape just in case, and fixed it as specified.
It is difficult to say, but I have the impression that it would have been better if they had taken care of the Waterproof.
View detail