Reviews
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50
Easy Custom but not recommended as a product.
Was the one you received as per Image?
To be honest, I'm not sure what part of these plastic parts cost 5,000 yen. (Lol)
There is a great sense that they are only chosen because there are so few options.
Was the installation difficult?
It can be done in less than 15 minutes, changing back and forth.
How was your experience with it?
Anyway, the problem is that the early Orange Lens is lame. So, we have to go to the trouble of replacing them, and the manufacturers are also looking down their noses at us.
If the cost is not that much different, I hope Honda will make Clear Lens LED Blinker from the beginning.
[Was there anything that disappointed you?
First of all, the cosmetics are very bad. It costs 10,000 yen for front and rear replacement.
I replaced it with the Orange bulb that came with the kit and activated the blinker before tightening it, and found that one of the bulbs was cut off.
If this Orange bulb was from FOR JAPAN MODELManufactureretc. it would have been a little sweeter, but I honestly do not recommend it.
Other items that would be helpful
Points to note
The Orange bulb that comes with the product may be out of balls from the start, so you should buy the Orange bulb together with the product. (Lol)
Opinions and requests to Manufacturer
The manufacturer has been very helpful to us with CROSSCUB CUSTOM, so we were quite shocked when the Blinker bulb ran out of balls this time.
I no longer care about the price, just do something about the attached Valve Quality.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Replace Stop-lamp with LED
I replaced the Stop-lamp on my 2004 LITTLE CUBCarburetor Vehicles.
When I noticed that the Position was not lighting up, I had a Motorcycle shop look at it and they said that there is a difference between AC and DC, so just replacing it will not light up the Position.
I asked him to tweak the Wiring around the Battery and it lights up fine.
The length of the Lamp insert is too long, so it doesn't fit the Snap and I was worried that it might come off wobbly.
If you stick it with Vinyl Tape or leave it as it is and a problem comes out, if you replace the insertion port of the LITTLE CUB side, it will be Large durable.
I think it's a bit dark, but I'm no longer worried about the ball breaking, so we'll see.
View detail
Fits: Others
Operating sound in 2 months ...
First, I bought and installed the HYPERLED BlinkerValve kit for JA10, but the sound gradually became smaller before 2 months ago, and the operation sound stopped after 3 months of installation. When I contacted Manufacturer, I heard that I have never heard of such Case. And I taught this product to purchase and installed it, but the operation sound no longer stops as time passes.
Because I am troublesome I will not inquire of Manufacturer or purchase newly.
View detail
After all it was dark
I exchanged with 23 W Valve, but the result Valve is brighter and clearer.
Internal structure of Blinker (Cut of Reflector or Lens) I think that it depends on the size of Large, but it seems that it did not suit yourself. (Not OEM)
The Lens part of my favorite car Blinker is stronger than 30 mm, but is it better if it is a smaller type?
But the sharp blinking in Sharp is more Parenthesis better than Valve.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
When going for a work in the mountains, a Dirt must be run, but in case of the usual Valve, it is early at vibration and has gone out in three days. Truly, this may not go out and may be bright. It merely exchanged and the Fuse has been turned o
When going for a work in the mountains, a Dirt must be run, but in case of the usual Valve, it is early at vibration and has gone out in three days.
Truly, this may not go out and may be bright.
It merely exchanged and the Fuse has been turned off immediately.
Although this is only 1 time and after fuse replacement can be used satisfactorily for the moment ...
The after [
] description is not a description (smile).
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
It is price setting out extraordinary as a Tail bulb of LED. It purchased with the proof of the pudding is in the eating. The mouthpiece can be applicable now to the Type with which it is BAY15D (there is also T20 Wedge type) business, an
It is price setting out extraordinary as a Tail bulb of LED.
It purchased with the proof of the pudding is in the eating.
The
mouthpiece can be applicable now to the Type with which it is BAY15D (there is also T20 Wedge type) business, and also the Tail lamp has become a License lamp and combination.
It is arranged so that the white LED for a License may enclose 360 degrees of side faces of a Valve round also sumptuously in a kind thing.
It is not necessary to measure the degree of pin setting angle of a Socket, and to choose goods specially like the goods equipped with white LED only in
one way, according to it.
If even the
mouthpiece suits, it can equip satisfactorily and will manage three functions, a Tail lamp, a Stop-lamp, and a License lamp, by this one.
Flexibility becomes high dramatically only now and it is very convenient delightful specification.
Although it is
--, though simultaneously regrettable, the Demerit which pulls the legs for practicality a little will also be born by this Merit.
White LED is that the permeability to a red Lens is low first.
In addition, since the Tp of the Valve is equipped with the Tip only for only three, red LED will become markedly dark compared with an electric lamp synthetically.
Although it is not a thing to the extent that it says that use is not borne at all, and it is some continuing using as an important safety-related part, it is a Level which memorizes uneasiness.
Don't say since it is
and don't use it for a Clear lens.
Since red will be clearly buried into white light, aside from the quantity of light, the body of the function of a Tail/Stop lamp is not accomplished.
Do increase a red Tip to solve a horizontal path thickly to a slight degree although
Size flexibility is lost a little?
If that is stood, it will not stand here.
It is very alluring specification.
View detail
It is high anyhow. buying the portion here, if it adheres to ? Brando for whom the product made from a Minimoto could be satisfactory -- it is -- although -- cautions are required. Although it is the Meter cable, it is not writing to HP of Mukaw
It is high anyhow.
buying the portion here, if it adheres to ?
Brando for whom the product made from a Minimoto could be satisfactory -- it is -- although -- cautions are required.
Although it is the
Meter cable, it is not writing to HP of Mukawa anywhere, but a
authentic positive plug cannot use the Cable of a rectangular head! The GEAR of
Mukawa is a Crab type.
In the case of
attachment, let's also buy a Meter cable together!
View detail
When attaching and using the trial with a pure relay on the delivered day, the light was switched on with the High flasher, but the light was not switched on, when attaching together and turning on the Switch, since the relay with a Hazard function of the
When attaching and using the trial with a pure relay on the delivered day, the light was switched on with the High flasher, but the light was not switched on, when attaching together and turning on the Switch, since the relay with a Hazard function of the DAYTONA arrived later.
Probably, affinity with the relay of a DAYTONA was bad, since the light was switched on when one more set of the APE of a Normal relay tried on the
trial.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR-2, KAWASAKI KSR-1
It has attached to KSR110. For Blinker attachment of company, by the Fender less kit of the abbreviation half the sum of a certain company, since the Blinker was not attached, the Fender less kit was also changed into Mukawa. although it was a t
It has attached to KSR110.
For Blinker attachment of
company, by the Fender less kit of the abbreviation half the sum of a certain company, since the
Blinker was not attached, the Fender less kit was also changed into Mukawa.
although it was a thing that
in-vehicle tool stops putting,
Inner fender ? is what fluent just like a board --
-- if it will be torn if this is loaded with an in-vehicle tool is felt.
Anxiety of being OK
rainy weather run.
Although a Tail makes it sink below wiring by a Tap, it is made to want it to connect
wiring with a Coupler.
the direction which wants to make the
Blinker into the Streamline blinker of Mukawa --
-- although we recommend you the Fender less kit here, when a NORMAL may be sufficient as the
Blinker, recommendation is seldom possible.
The way of the Fender less kit of the abbreviation half the sum of a
certain company is solid, and it can also carry
in-vehicle tool.
Although it was satisfactory when Mukawa
--Was the raw material in which it blamed and the Inner became brave with the kana which is too high considering specification, even if it also compared the
price --
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
[Webike Monitor] It will be in a strange state, putting [ will sometimes always be in a lighted state that the Brake lever was being interlocked with perfectly at the beginning which was attached, or ] out the light, if a Brake lever is grasped. A t
[Webike Monitor] It will be in a strange state, putting [ will sometimes always be in a lighted state that the Brake lever was being interlocked with perfectly at the beginning which was
attached, or ] out the light, if a Brake lever is grasped.
A translation is not understood ...
View detail
although one of 4 light LED4 pieces was attached easily approximately -- remaining three pieces -- -- after all, Valve mounting hardware was shaved with the File and attached somehow. ? operation is OK about whether it is the indi
although one of 4 light LED
4 pieces was attached easily approximately -- remaining three pieces --
-- after all, Valve mounting hardware was shaved with the File and attached somehow.
?
operation is OK about whether it is the individual specificity of the
Motorcycle, and whether it is the product precision of an LED Valve. Existing sharp LED blink is true.
battery consumption has also been improved.
(Check by a voltmeter)
View detail
Fits: Others , HONDA BITE, HONDA ZOOMER, HONDA DREAM50, HONDA Ape100, HONDA GORILLA, HONDA MONKEY, HONDA Ape50, HONDA ZOOMER, HONDA Ape50, HONDA Ape50, HONDA Ape100, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
Although a day is still shallow from impression at the time of the last attachment, it is used in various scenes for several days, and since there was new discovery, I will re-report. Although it was the visibility which thought was high at the time o
Although a day is still shallow from impression at the time of the last attachment, it is used in various scenes for several days, and since there was new discovery, I will re-report.
Although it was the visibility which thought was high at the time of attachment, it said to the coworker who was running succession.
What is attached now [ unclear / ... /-in whether are there few differences in brightness of tail lamp and stop-lamp and to have stepped on brake ] is the bulb of 5/10W enclosed by the product.
It seems that it is inferior in the visibility from a part with little diffusion of light, and slanting back somehow although this is w as it is pure.
Since I do not want to carry out custom even by endangering safety, I use a bulb besides the present or am inquiring in use on the LED bulb with high diffusibility.
Although appearance is sharp and it is pleasing, it is just going to worry now as if important visibility is not dealt with.
.
.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
Although it purchased since the price was simple at a low price ... They were appropriate goods. If saying also lets it pass to Faulk and it binds the blinker tight, cling will be possible, but the crevice has been made with Faulk at stay, without ben
Although it purchased since the price was simple at a low price ... They were appropriate goods.
If saying also lets it pass to Faulk and it binds the blinker tight, cling will be possible, but the crevice has been made with Faulk at stay, without bending of stay accompanying Faulk.
View detail
Since the color of a bulb is not pleasing yellow, it exchanges for a super white. The color did not so much change ... A photograph is a thing after exchange. Incidentally, since the headlight was an object for KLX450R and was a plastic lens,
Since the color of a bulb is not pleasing yellow, it exchanges for a super white.
The color did not so much change ...
A photograph is a thing after exchange.
Incidentally, since the headlight was an object for KLX450R and was a plastic lens, it had melted for a while also in 35W/35W.
It has only merely shone and is not asking for the function as a headlight.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR-2, KAWASAKI KSR-1
The lamp of LED is very intrepid and smart. However, there is uneasiness considerably in reinforcement so that the plate which attaches lamp stay may be pasteboard rather than the plastic --. If an in-vehicle tool does not devise, either, it stops
The lamp of LED is very intrepid and smart.
However, there is uneasiness considerably in reinforcement so that the plate which attaches lamp stay may be pasteboard rather than the plastic --.
If an in-vehicle tool does not devise, either, it stops appearing like normal.
Since it seems that metal things also have a plate with the product of the other company, I consider that it is better to inquire firmly according to liking.
View detail