Reviews
Fits: YAMAHA BirdCity125, KAWASAKI W650, KAWASAKI W400, HONDA Dio110, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, KAWASAKI W800, YAMAHA SR400, SUZUKI Gixxer, SUZUKI ADDRESS110, YAMAHA CYGNUS X, YAMAHA SEROW250, HONDA GB350S, SUZUKI swish
I do manage to get into the Seat of BirdCity125 though.
Seat at BirdCity125 is the Level that I manage to get into.
I had to pull it in quite a bit. There is no room on the back side either, and I had to repair it with a shoe pond because it was coming loose from the front side of the seat. I needed another one size larger.
View detail
It rusts.
It was only rained on a few times, but there were bubble marks in the paint, from which it rusted. Before I knew it, it was so rusted that the surface paint was peeling off.
After removing the rust with a wire brush and painting with Touch up for Vehicle's Matte Black, it's almost unrecognizable, but I can't say it's good quality.
View detail
PetitCustom
Installed on CL250
It's nice to look at.
I've been riding for a while.
Where there is a gap between the OEMSeat and the
Where wrinkles form.
I'm sorry
View detail
Fits: Others , HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUBC125
I bore up CUB to Yellow color Number so I can Tandem!
Bore up the CUB PRESS from 50cc to 75cc and changed it to TandemSpec. I changed the cargo bed to a SUPER CUB one, but I had to drill holes and modify it to install a seat on something that could not be tandemed in the first place. Customers are responsible for their own use! View detail
Fits: HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 90DELUXE, HONDA SUPER CUB70DELUXE
Now you can Tandem!
It took a little bit of effort to install it, as it feels like it requires a lot of hang and you have to push it in. It is a little difficult to install unless you are careful. View detail
Unable to know
Quality and Texture Information Center Size Is Not Right Side bags are installed without any problems with the feeling of use Product to purchase together 09-11-0270 The difficulty of installation was also pulled by two adult men and put it in the hole Cost performance and comparison. I've never used any other product, but the price is lower than other products WeBike packaging is always great. Arrives in a week for delivery and packaging When purchasing, the upper part of the hole can be installed first and the shocker side can be installed. Since it was installed in the rear rack of Takegawa [09-11-0225], the side was also selected as Takegawa, but the size was slightly reduced during welding, so installation was not easy View detail
In Style.
I don't know if it is standard or not, but I installed it for parenthesis, but I don't go camping, so I only use it to put my helmet and gloves when I take a break on the way to touring. However, it looks good, but be careful that if the front steering area becomes heavy, the handling will be completely different, like when you put a lot of luggage in the front basket of a bicycle! If you can stand it, I think this is a great product in terms of construction and quality. View detail
Not as good as others.
Seat covers are not easy to install on any product, but I felt that this product was not particularly easy to work with.
First, remove the Seat by removing the 10mm Nut, then place the Seat cover over the Seat while pinching the tip of the Seat cover onto the Hinge to secure it in place so that it will not move. After that, adjust the entire piece by pulling it, and tighten the string to secure it in place.
This string. If you pull too hard, it will break." The note said, "It sure looks like it is going to cut.
However, there is some concern that the Seat cover may come off unless tied down very tightly. Holdability is that low.
First of all, there is a possibility that the string may break during installation, and if it is loosely tightened, there is a possibility that the Cover may gap or come off.
I don't know how it will turn out because I haven't used it yet, but if the Cover seems to Gap, I'll tighten it more in preparation for the string to break.
View detail
Fits: HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
Thick.
I'll have to replace the slobo as well to see the effect. View detail
Reduction in cost
When I installed it, I felt a bad sensation when I hand-tightened it using Bolt of Included Parts:, so I looked at the screw threads and found that BALI was very strong.
This time, I used Dice to clean it up, but if you don't have Dice, you can buy another Bolt similar to it at Homsen.
It may be just a coincidence, but you must check before installation just to be sure!
I was surprised, although it may be inevitable when you look at the social situation.
The thing itself was good!
View detail
Fits: HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
Power up, this is not the only way to experience it.
[How is it used?
Used only in Circuit.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Somewhat troublesome because the Air Intake hole in the Air cleanerBox needs to be widened with a Cutter. Be careful not to widen it too much.
How was your experience with it?
I saw a review on YouTube that said the power was increased, so I installed it, but I couldn't feel the effect.
Perhaps it is not that the product is bad, but rather that it is only effective when an exhaust system with good exhaust efficiency is properly installed and fuel conditioning is performed.
[Included Parts:were they on?
It contained a brochure of Mukawa's products.
[Was there anything that disappointed you?
Not being able to experience Power up.
I can't say for sure because I didn't measure it on the chassidai…
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Mukawa's Power Filter, Sub computer, and Racing Exhaust System are available in Quantities:Let's install it with Set!
View detail
Fits: HONDA MSX125SF, HONDA MSX125, HONDA MSX GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA DAX125
A Little Customization
I bought a Grom and thought I would start with the easy part and Custom.
Anyone can do it, as it is simply attached with double-sided tape.
And, although this product itself has no effect, it is very nice to see it dress-up.
I first purchased the red color, but later I wanted to change the color shade, so I bought a new one, but it is not expensive, so it is good that I can change it right away.
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
Comparison with Komine products
After installation, I did a day-touring trip of about 500 km.
(*CROSSCUB110, replaced by Seat of JA45.)
Having previously used a similar product made by Komine, I leave you with my comparative impressions.
Both are easy to install, and I don't think there is any difference in fit between the Large and the Large.
Airflow during driving was not much different because of the leg shield? Not much difference.
Cushion nature is not to your liking at first. A sense of change I preferred the Komine one because it is larger than the Takegawa one. However, in fact, Takegawa's Mesh fabric is more comfortable for my buttocks when I use it for a long time. The reason is that Komine's mesh fabric is larger in diameter, and I feel a little bit of damage when I run long distances.
Both of them are good because they do not steam easily, but as for Takegawa's product, unfortunately, it is easy to slide forward during Brake sudden braking.
View detail
It is quite large, so you have to choose where to put it!
[How is it used?
I bought it to do a bit of Large-tiered StickerTune.
Was the one you received as per Image?
The Sticker was much larger than I expected.
Was the installation difficult?
There are not many planes in Motorcycle, so only Tank and others seem to be difficult.
Choose a place to put it.
How was your experience with it?
It does not seem to be very water-resistant, so it is best to avoid rainy weather.
[Included Parts:were they on?
Not at all
[Was there anything that disappointed you?
Larger than expected, there is no place to put it.
It would be nice if there was a middle ground between SmallSize and this Size….
There are still more than twice as many Large Size Stickers than this, but I wonder if they will be put on cars?
View detail
The standard TAKEGAWA Sticker.
[How is it used?
I purchased this item to adjust for free shipping.
Was the one you received as per Image?
It was just like the Image in the photo image.
Was the installation difficult?
Just paste it wherever you want.
How was your experience with it?
Durability is not that promising.
It doesn't bother me too much because everyone puts it up so often.
[Included Parts:were they on?
There is no other.
Rather, one of these Stickers is included with the purchase of Mukawa Parts.
[Was there anything that disappointed you?
▼It is the same Sticker that comes with Bore up and Reinforced Clutch, so you can stock up a lot if you buy them together! (Lol)
View detail
pe24 filter type2
About quality and texture It looks like a waterproof cover, but it's like a net. It's going to rip faster than I thought About the feeling of use It looks like there's nothing wrong with breathing in air because it's a net Since it's rainy season, the bike is on standby, so I bought it to defend against foreign substances Products to buy together SPTAKEGAWA Air Filter (Type-2) (Taper / 46 mm) Difficulty of installation be easy to install Cost performance and comparison with other products It's not expensive if you think it's necessary About shipping and packaging It took a week and the packaging was great Any concerns, cautions, or advice when purchasing I think it protects the filter and it's expensive to buy Because the same filter is similar in price I don't recommend it unless you're on standby for a long time View detail
Fits: HONDA CT125, HONDA MONKEY125, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L, HONDA MONKEY125, HONDA CT125
Exactly
The size and shape are perfect, and if you ride for a long time, I think it would be effective since it is a part that is prone to scratches. I think the price is a little high, but that is to be expected since there is no substitute. View detail
Fits: HONDA MSX125SF, HONDA MSX125, HONDA MSX GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA DAX125
Is it good for One pointAccent.
This is a substitute that I bought to try out.
The same kind of product is also available from KITACO, but SP Mukawa's is simpler and the letters are clearly marked as Laser print, so I decided to use this one.
Double-sided tape is included in the package, but the cut between the tape and the excess tape on the inside is insufficient, so it cannot be removed cleanly when removing from the base.
I think it's safe to use DesignCutter or something similar to separate them before removing them.
I mean, why don't you put it on Parts from the beginning?
As for my thoughts on the fitment.
It's good for One pointAccent.
The scratch of the Drum part in the middle became more prominent. (Lol)
View detail
Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, HONDA CL250, YAMAHA XSR125
Although it does get a little cooler.
[How is it used?
I put it on my D Tracker 125.
Was the installation difficult?
Simply remove the Seat to install.
How was your experience with it?
Hip swelling can be reduced by about 20%.
[Was there anything that disappointed you?
It absorbs water, so if you sit on it the day after it rains, your butt will be soaked.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
Design is my favorite but…
The quality of the OEM Equivalent Product and the appearance from the side is also good!
I was happy to go out touring but it was torture… hard, it's like sitting on a log!
If you're a Touring Mainer, you'll probably choose the OEM one.
View detail