Reviews
Fits: HONDA MONKEY125, HONDA CT125, HONDA GROM, HONDA MONKEY125ThailandMODEL, HONDA DAX125, HONDA CROSSCUB110
Bracket painted ….
InstallationInstruction Manual is difficult to understand, but it is easy to understandQuantity:Pair (for Left and Right) Be careful not to make the mistake of
The painting of the mounting Bracket is Quantity:Pair (for Left and Right) I was also bald. Rather than sayQuantity:Pair (for Left and Right) I think it might have been better to say "I was able to turn it over. It's a pity.
View detail
Fits: HONDA SUPER CUBC125, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA CT125, HONDA CB125R, HONDA CB250F, HONDA MONKEY125, HONDA CBR250R, HONDA MSX, HONDA GROM, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125ThailandMODEL, HONDA CB150R, HONDA DAX125, HONDA CT125
This is what a luxury Lever is:??
Mukawa High Quality Lever??
Texture and structure are both good!
I just think 20,000 yen is a little too much ….
View detail
Soak before fitting
I soaked them in warm water prior to fitting, as per the advice of other reviewers.. No issues getting them on the levers, it did take a few minutes for each side though. They are sufficiently firmly in place that they don't move around at all. Although I expect they may shift a bit if they get wet. View detail
Easy to wrap around when you want to use it.
[How is it used?
After the end of the LITTLE CUBRestore that was transferred to us. Comfort Custom." I have been planning to buy a Grip heater as part of the I have been planning to buy a Grip heater for a long time, but I have not been able to do so. When I get my CUB, I want to put KIJIMA's Barrel Style Grip on it." I also have the desire to be able to remove it when it is not in use. Wrap-around." I decided to look for Grip heater in
The products purchased in such a situation are SP Mukawa HeatGripTYPE-ROLL This is the case
Did you receive the item as per the Image?
Wrap-around Grip heater is also sold by DAYTONA and KIJIMA, but both products are "Tighten it up and wrap it around with a shoelace-like object." The type is a type that requires a lot of effort to fix, and the surface is slippery, especially on the Axel side. (If you hold it loosely, the surface is too slippery and the Axel will return.) I was not able to purchase it because I would get tired for no reason.
This product we found in such a situation is Velcro (Magic tape) In addition, the surface material is non-slip, which helps reduce fatigue.
Furthermore, the product is powered by a USB port, so it can be easily connected to any vehicle that has an external power supply extraction port, so it was exactly as pictured.
Was it difficult to install?
Simply wrap it around the Grip, plug it into the USB Power Port, and turn on the Grip heater.
How did you like it?
I don't know if it is due to the battery in the vehicle or the performance of this product, but compared to the installed type of grip heater, the warmth is one level lower. However, it seems to be one level less warm than the installed type of Grip heater.
But it's effective enough. I'm glad I put it on." The effect is so solid that it seems that if you install the Handlebar Cover here Hand kotatsu. The result of the
Was "Included Parts:" attached?
This product and a simplified Instruction Manual (Spec. Book?) is included
Were there any disappointments?
Nothing so far, expect durability.
Other items that would be helpful
Point and hang of installation
Since there are no electric heating wires around the Velcro portion, when wrapping "What part of the hand do you want warmed up?" Think about it and wrap it around.
[Availability and clarity of the Instruction Manual
As noted above, a simplified Instruction Manual is included.
To be honest, installation is so easy that there is no problem even without the Instruction Manual.
[Notes]
Since it is a wrapping type, the Grip becomes thicker after installation. This product is not suitable for those who do not like thicker Grip.
The Power Cord is long because it is a Universal Product. It would be better to use it for a long time if it is wired to prevent it from getting caught when getting in and out of the car.
[ITEMS TO BUY TOGETHER
It cannot be used without a USB Power Port in the first place, so it is essential for vehicles that do not have one.
If you are sensitive to cold, you can also purchase a hand cover. Hand kotatsu. You can ride even more comfortably as a
[Opinions and requests to Manufacturer
It was refreshing to see such a product lineup at SP Mukawa, which has a strong image as a Tune-up Parts Manufacturer.
View detail
I used it for Special clutch.
I bought this clutch for my CUB with a special clutch. It is a little expensive, but it is safe. View detail
Fits: Others MIKUNI VM26, Others KEIHIN PE28, Others KEIHIN PE24, Others KEIHIN CR mini, Others KEIHIN PD22, Others KEIHIN PC20, Others KEIHIN PC18, Others KEIHIN PB16
Buy again
The quality and texture information set is really good be responsive to high-strolls for the feeling of use The level of difficulty you can try There are other affordable products with cost performance and comparison to other products, but I recommend you to buy them as a set WeBike packaging is always great, arriving in a week for delivery and packaging The second purchase is a concern, caution, or advice I moved and installed the handlebar, but there was something wrong while driving, so I checked and found it was broken, so I bought it again If PC20 tightens with too strong a torque, the straights can break View detail
When using Clutch lever in Mukawa
I purchased a Mukawa Clutch lever, but it was a NORMAL Clutch Cable, so I need this conversion. The price is reasonable. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
GORILLARemake
I used it for gorillaremake.
Instruction Manual is also easy to understand.
View detail
SP Mukawa Lever grip
[How is it used?
Used for scooter levers
Was the one you received as per Image?
As per Image
How was your experience with it?
Good feeling when gripping.
[Points to note]
May not fit depending on Lever size
How did it compare to other products?
There is no comparable product.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA CHALY 50, HONDA CHALY 70
Is it cool?
I have been interested in this product for a while, but I was not sure if it would work or not, but I took the plunge and bought it. View detail
Luster is available
I installed it on my ADV150.
The installation Instruction Manual states that it is compatible with both the 160 and the 150.
We are equipped with Endurance's Long Screen,
When the handlebar is turned fully down
There is interference when Windshield is lowered
No interference with Windshield up
It is
Installation is easy, and if you can do Mirror replacement yourself, it is a piece of cake.
The Installation Instruction Manual says to tighten the Cap Screw at the end of the work by creating a gap between the Lever and the Cap Screw, but before removing the Mirror, you can use the Quantity:Pair (for Left and Right) It is easier to fix both of them firmly in place, and then simply install the whole set.
Perhaps it was written at the end of the procedure because of the interference.
As wind and rain protection, it is there. There are holes, but if only the fingertips, not the whole fingers, can be protected from direct wind, the temperature you feel will be totally different.
The only thing I miss is the Design, which, unlike the photo, is an assertive Black with tremendous Luster.
Even with ADV, I feel that it doesn't look good…quite floaty… with mat color type bodies.
I haven't tried it yet, but maybe if I apply a matte Clear, it will blend in a little better?
Originally, there is nothing wrong with an ADV with an Aggressive color scheme, it is a perfect product.
View detail
Fits: HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY BAJA, HONDA MONKEY, HONDA 12VGORILLA, HONDA 12VGORILLA, HONDA 12VMONKEY, HONDA 12VMONKEY, HONDA 6VGORILLA, HONDA 6VMONKEY, Others Vehicles equipped with SP Mukawa's Manual clutch kit, Others Vehicles equipped with SP Mukawa's combination switch
Clutch lever bolt
I think the product itself is satisfactory. The only thing is that the flange bolt for the handlebar cannot be tightened. I wonder if they are inspecting the product. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
Used in MONKEY
I chose the OEM Blinker because it does not have push cancellation, but it is a bit expensive. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
It is a stable Mukawa Switch box.
I was unsure about replacing the Switch box, but decided to go with the stable Mukawa. I am glad I bought it. The price is a little high, but I don't regret it. View detail
Meter position, down.
Installed with handlebar replacement.
The meter position is lower than the NORMAL position, but the Speedometer Cable is more difficult to install.
I pushed my way in by brute force. (Lol)
View detail
Fits: HONDA Ape50, HONDA Ape50(FI), HONDA Ape50(FI)Type D, HONDA Ape100, HONDA Ape100 Type D
SP TAKEGAWA Steering Damper Bracket Kit
About quality and texture It's well organized and high quality About the feeling of use It fits perfectly with the ape parts Products to buy together Steering damper Difficulty of installation have to get rid of more than you think. But it's not hard Cost performance and comparison with other products There is a reason why many people use it, but the price is too high About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing It's one of the parts that I've been waiting for the most since I have a damper at home, and I'm satisfied that I bought it as soon as it was updated as a new product on the web bike. webike thank you!! View detail
Fits: HONDA CL500, HONDA GROM, HONDA CL250, HONDA CB125R
Actually purchased to avoid cold air.
Insects, rain, wind (especially in winter) I bought these to avoid rain and wind. Rain and wind hit my hands, but it is better than direct hit by a large amount of rain and wind. However, the shiny plastic look is cheap, so I primed it with Primer for plastic and painted it matte black. (It was easy because they are both Spray).
Lastly, the installation, in the case of the CB125R, the brake fluid box had to be removed, and as I could not remove it, well, it was a hassle in many ways. (Lol)
View detail
Fits: HONDA 12V GORILLA, HONDA 12V MONKEY, HONDA 12V GORILLA, HONDA 12V MONKEY, HONDA 6V GORILLA, Others , Others , Others , HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape100, HONDA Ape100, HONDA Ape50, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY BAJA, HONDA 6VMONKEY
Functions well, but Bolt rusts.
I installed it on MONKEY
The image shows the Cable adjusterBolt and PinchBolt after one month of installation. Rust has turned around quickly.
After all, nothing can beat HondaOEM Product in rust resistance for this kind of Bolt.:Rust protection is perfect by replacing with Stainless Steel adjuster.
Adjuster can be installed as long as it is M8Type, so it may be good as a Dress-up even if you put on Red or Gold one.
I am not particularly dissatisfied with it because it is perfectly fine as a Lever function.
View detail
Fits: Others For SP Mukawa's Clutch Cable, Others Vehicles equipped with SP Mukawa's dry clutch cover, Others Vehicles equipped with SP Takegawa Die Cast Clutch Cover, HONDA XR100 Motard, HONDA XR50 Motard, HONDA 12VMONKEY, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA Ape100, HONDA MONKEY R, HONDA Ape100, HONDA Ape50, HONDA Ape50, HONDA MONKEY RT, HONDA Ape50, HONDA MONKEY, HONDA MONKEY BAJA, HONDA 12VGORILLA, HONDA 12VGORILLA, HONDA 12VMONKEY
Takegawa Special Clutch Cover
About quality and texture The quality of the product was excellent, with no free play About the feeling of use I definitely liked the clutch feel better than the standard clutch Products to buy together Takegawa Special Clutch Cover Difficulty of installation It's easy to install It is very easy to install, but I installed a different holder that can install the side mirror, but I am not happy because I can't take out the fixing pin Cost performance and comparison with other products The price and quality are good About shipping and packaging I received the delivery in a week Any concerns, cautions, or advice when purchasing First, check the bolt size of my side mirror and install it Otherwise, something really big will happen View detail
clutch
I bought it to change the clutch. Most of the parts in my APE100 are from SP TAKEGAWA company, but because I first bought DAYTONA product, I could compare it with this product. I will show you that there are fewer unused wires than DAYTONA products, so it can be installed alone enough ---------------------------------- ------------------------ I bought it to change the clutch, but most parts in my APE100 chose the product from the SP Takegawa company, but I first purchased the DAYTONA product, so I could compare it with this product. I will show you that there are fewer lines that are not used than Daytona products. Powered by Google Translator View detail