Reviews
Note:5 stars for Handlebar and Touring in the city
As stated in the title, the feeling of operation, push/pull, and position during city driving and touring are 5 stars. I have heard that other companies' handlebars are much narrower and the position is better, but the feeling of control is not so good, and it is not possible to load the front well, etc. However, there is no problem at all with this product for city riding and touring, I have also tried this product with the STD Handlebar made of aluminum to make it lighter and the Handlebar slightly narrower (which is quite large and reduces the stress on the shoulders and wrists considerably). It is easy to use even for Gymkhana. The angle of the handlebar is shown in the picture below, but when the handlebar is fully locked, the bottom of the RightSwitch is level with the slope of the body.
From here, I will show Minus a little personally.
It is great for city touring and slow turning Gymkhana, though,
In the case of Curve and Circuit, the aperture of the Handlebar praised above will be averse to the above, and front load will be somewhat more difficult.
The inner diameter of the handlebar end is 13mm, which is very narrow, so there is no choice of bar end or bar end mirror. 13.5mm is also no good, so it must be 13mm or smaller to fit. I have successfully installed the bar end mirror with the help of the DAYTONA Hi-Sider Universal Product.
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA GROM, HONDA MONKEY125ThailandMODEL, HONDA DAX125, HONDA CROSSCUB110
Bracket painted ….
InstallationInstruction Manual is difficult to understand, but it is easy to understandQuantity:Pair (for Left and Right) Be careful not to make the mistake of
The painting of the mounting Bracket is Quantity:Pair (for Left and Right) I was also bald. Rather than sayQuantity:Pair (for Left and Right) I think it might have been better to say "I was able to turn it over. It's a pity.
View detail
Genuine SP Takegawa Master Cylinder Lever for Honda Monkey 125
I specifically purchased this Kitaco lever as it is a billet one and not a steel one that came on the bike. The customer wanted a billet lever as a replacement anyway due top asmall fall and the lever got scratched pretty badly. I looked a t a few other brands but finally found that SP Takegawa did a cracking deal on this lever so in my basket it went. It was not really hard to find as I just used the search on Webike for this model and narrowed down categories. For what this is actually made of the price was slightly reflected in that but still, really good value from a great brand. With some other parts, my order was shipped using EMS and arrived in 5 days. The lever did comae in the SP Takegawa packaging and was well protected. The design is flawless and a really good take on a classic lever pattern. As this is billet, it is made from one piece of aluminium and you can see that in the lever. The quality is really stunning. A lovely smoothed out surface with plenty of meat on it so it will not break easily. Fitting this to the Monkey bike was just a matter of unscrewing the pivot bolt and replacing the lever. Nothing hard at all. It did surprise me but the lever once fitted does feel like it belongs on the bike anyway. The action is smooth and no notchiness. Very pleased with this purchase. View detail
Fits: HONDA SUPER CUBC125, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA CT125, HONDA CB125R, HONDA CB250F, HONDA MONKEY125, HONDA CBR250R, HONDA MSX, HONDA GROM, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125ThailandMODEL, HONDA CB150R, HONDA DAX125, HONDA CT125
This is what a luxury Lever is:??
Mukawa High Quality Lever??
Texture and structure are both good!
I just think 20,000 yen is a little too much ….
View detail
It fits the aperture Handlebar.
I replaced the handlebar, but the OEMMirror is too long and looks like a bug's antennae.
Installed by Short.
It fits well with the aperture handlebar and is easy to see behind.
View detail
Great!
[How is it used?
I had always felt that the OEMHandle position did not fit my body, so I took the plunge and bought it.
Was the one you received as per Image?
The look and feel was great.
Was the installation difficult?
The Instruction Manual instructs to change the angle of the hose joint coming out of the brake master cylinder because the height of the handlebar is slightly higher. However, if we remove the brake hose, we need to bleed the air out of the hose, so we reevaluated the hose routing and installed the hose as it is. As a result, the handlebar was adjusted to the quantity:Pair (for Left and Right) The Hose does not seem to be subjected to any undue force even when it is turned up to 2.5mm.
However, the manufacturer's instructions are to install the Hose at a different angle, so do so at your own risk.
How was your experience with it?
It is the best! This has been the most effective Parts I have ever custom made.
The forward tilt has been loosened and the aperture has been slightly increased, making it much easier to operate the Handlebar.
Vibrations also seem to have been reduced, and the numbness in my hands that sometimes plagued me has disappeared.
View detail
Fits: HONDA CB125R, HONDA MSX125SF, HONDA MSX GROM, HONDA MSX125, HONDA 400X, HONDA CBR400R, HONDA CB400F, HONDA ADV160, HONDA PCX, HONDA PCX160, HONDA DAX125, HONDA MONKEY125, HONDA GROM, HONDA CBR250R, HONDA CBR250R, HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUBC125, HONDA ADV150, HONDA GROM
A wonderful design that perfectly attaches to the original Honda master cylinder
About quality and texture, I can confirm that the quality is great and the material used is aluminum that is CNC machined to shape and finished with a mixture of grey, red and black anodized coatings.About the feeling of use, A wonderful design that perfectly attaches to the original Honda master cylinder and provides a premium feel when applying the front brake with it's solid construction and adjustable positioning. Products to buy together, To ad in continuing to achieve a more premium feel the addition of a quality set of hand grips would be ideal to also add to your cart to replace the original Honda grips.Difficulty of installation, I can say the fitment of the aluminum billet brake lever for my installation was easy due to the ease of access and the simple nature of securing it with the original Honda hardware.Cost performance and comparison with other products, The pricing of this product is high, you receive a very high quality part in regards to material used and the manufacturing process used that is not offered by the cheaper options.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Soak before fitting
I soaked them in warm water prior to fitting, as per the advice of other reviewers.. No issues getting them on the levers, it did take a few minutes for each side though. They are sufficiently firmly in place that they don't move around at all. Although I expect they may shift a bit if they get wet. View detail
Easy to wrap around when you want to use it.
[How is it used?
After the end of the LITTLE CUBRestore that was transferred to us. Comfort Custom." I have been planning to buy a Grip heater as part of the I have been planning to buy a Grip heater for a long time, but I have not been able to do so. When I get my CUB, I want to put KIJIMA's Barrel Style Grip on it." I also have the desire to be able to remove it when it is not in use. Wrap-around." I decided to look for Grip heater in
The products purchased in such a situation are SP Mukawa HeatGripTYPE-ROLL This is the case
Did you receive the item as per the Image?
Wrap-around Grip heater is also sold by DAYTONA and KIJIMA, but both products are "Tighten it up and wrap it around with a shoelace-like object." The type is a type that requires a lot of effort to fix, and the surface is slippery, especially on the Axel side. (If you hold it loosely, the surface is too slippery and the Axel will return.) I was not able to purchase it because I would get tired for no reason.
This product we found in such a situation is Velcro (Magic tape) In addition, the surface material is non-slip, which helps reduce fatigue.
Furthermore, the product is powered by a USB port, so it can be easily connected to any vehicle that has an external power supply extraction port, so it was exactly as pictured.
Was it difficult to install?
Simply wrap it around the Grip, plug it into the USB Power Port, and turn on the Grip heater.
How did you like it?
I don't know if it is due to the battery in the vehicle or the performance of this product, but compared to the installed type of grip heater, the warmth is one level lower. However, it seems to be one level less warm than the installed type of Grip heater.
But it's effective enough. I'm glad I put it on." The effect is so solid that it seems that if you install the Handlebar Cover here Hand kotatsu. The result of the
Was "Included Parts:" attached?
This product and a simplified Instruction Manual (Spec. Book?) is included
Were there any disappointments?
Nothing so far, expect durability.
Other items that would be helpful
Point and hang of installation
Since there are no electric heating wires around the Velcro portion, when wrapping "What part of the hand do you want warmed up?" Think about it and wrap it around.
[Availability and clarity of the Instruction Manual
As noted above, a simplified Instruction Manual is included.
To be honest, installation is so easy that there is no problem even without the Instruction Manual.
[Notes]
Since it is a wrapping type, the Grip becomes thicker after installation. This product is not suitable for those who do not like thicker Grip.
The Power Cord is long because it is a Universal Product. It would be better to use it for a long time if it is wired to prevent it from getting caught when getting in and out of the car.
[ITEMS TO BUY TOGETHER
It cannot be used without a USB Power Port in the first place, so it is essential for vehicles that do not have one.
If you are sensitive to cold, you can also purchase a hand cover. Hand kotatsu. You can ride even more comfortably as a
[Opinions and requests to Manufacturer
It was refreshing to see such a product lineup at SP Mukawa, which has a strong image as a Tune-up Parts Manufacturer.
View detail
I used it for Special clutch.
I bought this clutch for my CUB with a special clutch. It is a little expensive, but it is safe. View detail
Fits: HONDA CB125R, HONDA MSX125SF, HONDA MSX GROM, HONDA MSX125, HONDA 400X, HONDA CBR400R, HONDA CB400F, HONDA ADV160, HONDA PCX, HONDA PCX160, HONDA DAX125, HONDA MONKEY125, HONDA GROM, HONDA CBR250R, HONDA CBR250R, HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUBC125, HONDA ADV150, HONDA GROM
If you have small hands, this is Recommendation.
CROSS CUB (JA60) I bought it for.
I have small hands, so I was having trouble reaching only a few fingers with the OEM Lever, and this was recommended to me.
I did the installation myself and it was not that difficult.
I really like the fact that I can adjust the position of Lever after using it!
It is easier to grip and much more secure.
Also, I wasn't expecting much. Foldable." I was also impressed… when I experienced it the other day in an unexpected standstill. I am glad I replaced it.
I love the calm color of Gun meta and the colorful Red adjust lever.
View detail
Fits: HONDA SUPER CUBC125, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA CT125, HONDA CB125R, HONDA CB250F, HONDA MONKEY125, HONDA CBR250R, HONDA MSX, HONDA GROM, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125ThailandMODEL, HONDA CB150R, HONDA DAX125, HONDA CT125
Provides a premium feel when applying the front brake
About quality and texture, I can confirm that the quality is great and the material used is aluminum that is CNC machined to shape and finished with a mixture of grey, red and black anodized coatings.About the feeling of use, A wonderful design that perfectly attaches to the original Honda master cylinder and provides a premium feel when applying the front brake with it's solid construction and adjustable positioning. Products to buy together, To ad in continuing to achieve a more premium feel the addition of a quality set of hand grips would be ideal to also add to your cart to replace the original Honda grips.Difficulty of installation, I can say the fitment of the aluminum billet brake lever for my installation was easy due to the ease of access and the simple nature of securing it with the original Honda hardware.Cost performance and comparison with other products, The pricing of this product is high, you receive a very high quality part in regards to material used and the manufacturing process used that is not offered by the cheaper options.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA GROM, HONDA MONKEY125ThailandMODEL, HONDA DAX125, HONDA CROSSCUB110
Stylish Guard!
I wasn't expecting much in the way of Guard, but it worked better than I expected. (It only provides a little wind protection on the street)
Good design, easy to install, and a good buy.
It is not suitable for full-scale wind protection, so it is only for those who need to focus on design.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
Simple Black Combo Switch
I was after an all black combo switch for my z50 and this is perfect. I was also happy to find that it doesn't have a pin inside so I don't need drill my bar like some switch blocks have. I like the minimalistic look it has and the buttons all feel like good quality. The packaging was very nice and packed well. It also came with a sticker. Thank you Webike again for another great purchase. View detail
Fits: HONDA MONKEY, HONDA APE 100, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA APE 50, HONDA GORILLA
smooth braking
I install SP Takegawa brake lever on modified Honda Dream 100, the SP Takegawa kit include 2 mirror bracket M8, M10 and front #29;stop switch with long cable. The brake lever fit on stock handlebar and smooth braking. View detail
Fits: Others MIKUNI VM26, Others KEIHIN PE28, Others KEIHIN PE24, Others KEIHIN CR mini, Others KEIHIN PD22, Others KEIHIN PC20, Others KEIHIN PC18, Others KEIHIN PB16
Buy again
The quality and texture information set is really good be responsive to high-strolls for the feeling of use The level of difficulty you can try There are other affordable products with cost performance and comparison to other products, but I recommend you to buy them as a set WeBike packaging is always great, arriving in a week for delivery and packaging The second purchase is a concern, caution, or advice I moved and installed the handlebar, but there was something wrong while driving, so I checked and found it was broken, so I bought it again If PC20 tightens with too strong a torque, the straights can break View detail
Fits: Others , HONDA MONKEY125, HONDA CL250, YAMAHA XSR125
The clutch cable looks nice.
The original version of Monkey is covered with a cover, so it is plain. I searched for parts to give it a point. I was looking for a color similar to the mesh hose connection part, and I happened to find a red-blue Takegawa cable adjuster. I am very happy because it matches well with the mesh hose and gives the plain clutch cable a more stylish look. -------------------------------------------------- -------- Monkey's genuine is covered with cover, so it's flat. I searched the parts to give points. I found a color similar to the mash hose connection, and I found Red Blue's Takega and Cable Eraster. Powered by Google Translator View detail
All blackMirror
I installed it on a SUPER CUBC125 and it can be easily replaced if you have a 17mm Spanner.
The arm comes in two different lengths, but for C125, the Short is fine,
The Mirror and Arm sections are also screwed in place, so they are firmly fixed, but should be adjusted when installed.
Waiting at a traffic light, etc. A little adjustment. However, it is easy to use because it is difficult to be misaligned.
View detail
That's great, Takekawa.
I purchased the STD Handlebar because it just didn't fit my body. I was worried that I would need to install a brake hose because it was only compatible with the Initial Model, but I was able to install it without any modifications. View detail
Excellent automatic shutdown and recovery
Grip heaterSP Mukawa HeatGrip Type -1 main installation. Detects the voltage of the vehicle's battery to detect low voltage (11.5V or lower) The Grip thickness and length are the same as the OEM, but the OEMSwitch box hole is fixed to the Quantity:Pair (for Left and Right) In the case of SV650, there was no need to modify the others. It is easier to fit the left grip if the heater is warm. Battery check is started by turning on the ignition key, and the battery voltage is indicated by the number of LED lights. It is still October, but it is cold in the morning and evening, so I turned on the heater. I don't have to worry about the battery running out, but I run a good distance every day, so the battery is always maxed out. View detail